TW Steel Volante 5030D User manual

SWISS VOLANTE CHRONPGRAPH 48MM

TW STEEL
TW Steel is a watch brand harmoniously combining
both design and innovation. ‘The Watch in Steel’ leads
the oversized market with style and quality guaranteed.
TW Steel values the most important relationship of all –
the one with the consumer. To express this, we hereby
give you all the information that you need to enjoy your
TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict
controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel will
determine whether the appearance of the watch is
maintained in the future, or whether it will deteriorate.
In order to enjoy wearing your TW Steel as long as
possible, we include a number of tips: If the watch
comes into contact with hard or corrosive materials,
this can cause damage, which, if it occurs regularly,
will become clearly visible in the form of scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used.
It is advisable to regularly polish your watch with a
soft cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting the
time or date, opening or closing the crown or crowncap,
should not be done roughly, but carefully.
ENGLISH

USING THE CHRONOGRAPH
Start: Press the push-button (A). Stop: to stop
the timing, press push-button (A) once more
and read the chronograph hands 1h/20min/38sec.
Zero positioning: Press the push-button (B).
(The chronograph hands will be reset to their zero
positions.)
ADJUSTING THE CHRONOGRAPH
HANDS TO ZERO POSITION
Pull out the crown to the 3rd position (all chronograph hands are in
their correct or incorrect zero position). Keep the push-buttons A and B
depressed simultaneously For at least 2 seconds (the second counter
hand rotates by 360 degrees, corrective mode is activated). Returning
the crown to its normal position.
(0) position
Chronograph
S econd hand
Hour hand
Chronograph
Minute hand
Second
Counter
Chronograph
Hour hand
Date
Button B
Crown /normal
crown position
Minute hand
Button A
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
USE OF THE CROWN
To adjust the time or set the date, unscrew
the crown by turning it anti-clockwise.
After adjusting, screw the crown cap back
by turning it clockwise.
ADJUSTING THE TIME
Pull the crown out to the 2nd position.
Turn the crown to set the hour and minute hands.
After the time has been set, push
the crown back to its normal position.
ADJUSTING THE DATE
Pull the crown out to the 1st position.
Turn the crown clockwise to set the date.
After the date has been set, push the crown
back to its normal position.