DAS.4 SP40 User manual

User Manual
SP40

Thank you for choosing our smart watch. You
can fully understand the use and operaon of
the equipment by reading this manual.
The company reserves the right to modify
the contents of this manual without any prior
noce.
The product contains: a packing box, a manual,
a smartwatch, and a USB cable.
Watch funcon descripon
Buon descripon:
Up buon: Turn on
and o the screen; one
press to return to the
main interface; long
press to restart the
watch.
Buon down: Short press to enter mul-sport
mode. In addion, when the watch has the
screen o, the watch can turn on the screen
by pressing the buon.
Charging instrucons:
Magnec charging, as shown
in the gure below.

1.1 Shortcut funcon:
1) Swipe to the le to display the “+” icon, click the
icon to add part of the menu as a shortcut.
2) Slide down to display, Bluetooth connecon
status, me, power, brightness adjustment and other
funcons.
3) Swipe to the right to display, me/date/week, the
latest message (enter to view mulple messages)/
turn on or o Bluetooth for calls and display some of
the recently used menu funcons.
4) Swipe up to enter the menu interface, and slide up
and down to nd the corresponding funcon.
5) Long press the watch face interface and slide to
switch the watch face, select a new one to set it
successfully.
1.2 Push message
1) When the watch is bound to the APP, and the
nocaon permission is turned on, the new mes-
sages received in the nocaon bar of the mobile
phone will be pushed to the watch, and a total of 10
messages can be saved. Aer 10 messages the new
ones will overwrite the old ones.
2) Swipe to the boom to press the delete icon to
clear all message records.
1.3 Drop-down menu
From dial interface slide down to open the drop-
down menu interface.

1) Bluetooth connecon status; me display, power
display;
2) The rst icon, about
3) Sengs; enter the sengs
4) Adjustable screen brightness
5) Stopwatch: Click the stopwatch to enter the inter-
face, and you can record the me.
1.4 Phone/Call History
1. Swipe le, tap the call icon to turn on / o Blue-
tooth, turn on Bluetooth, search for your mobile Blue-
tooth devices, nd the name and MAC address of your
watch (Select ‘Informaon’ on the watch) and select it
to connect. Once connected to Bluetooth successfully,
you can make and reject phone calls on your watch.
2. Call history, calls made and received can be saved.
More than 50 calls can be saved and will be automa-
cally replaced with new ones if they exceed 128. Press
any saved number to make a call.
3. You can dial any number via the keypad.
1.5 Messages
Once the smartwatch and applicaon are successfully
connected, you can acvate the corresponding
applicaons to receive nocaons from your mobile
phone and synchronize with the smartwatch.
1.5.1. Incoming call nocaon:
Acvate the call reminder in the app. When the

phone receives the call reminder, the smartwatch will
light up and vibrate.
1.5.2. SMS nocaon:
Enable SMS nocaon in the applicaon. When you
receive one or more SMS messages on your mobile
phone, the watch will receive one or more SMS
reminders.
1.5.3. Other applicaon message nocaons:
Turn on the corresponding messaging switch for your
applicaons, such as Outlook, Facebook, and other
applicaons. When the mobile receives message
nocaons for single / mulple applicaons, the
watch will receive the corresponding nocaons
respecvely.
1.6 Frequently used contacts
Through the applicaon, you can synchronize up to
20 contacts with the watch for shortcut.
1.7 Fitness data
Exercise data are acvated from the factory. To view
tness data, swipe from boom to top to display
the current number of steps, distance, and calories
recorded by the watch. The data will be deleted at 12
in the morning every day.
1.8 Sports modes (strike, running, cycling, skipping
rope, badminton, basketball, football)

1.8.1 Select the corresponding exercise mode. Click
the start buon on the screen to enter the corre-
sponding exercise mode. click calculated to stop the
exercise, click the end buon to end the exercise and
save the data.
1.8.2 When the exercise me is longer than 1 minute,
the exercise data can be saved. When the exercise
lasts less than 1 minute, a message “Too lile data to
save” will appear.
1.9 Heart rate
Posion the watch correctly on your wrist, enter the
heart rate menu and you can measure the heart rate
value each me.
1.10 ECG
Posion the watch correctly on your wrist, enter the
ECG menu (you must open the “ECG monitor” from
the applicaon), you can measure the ECG value
and the ECG data will be stored in the applicaon at
the same me. For this funcon, the watch must be
connected to the applicaon for its use.
2.0 QR code
Scan the QR code with your mobile phone to down-
load the watch applicaon.
2.1 Calculator
You can do simple operaons with a calculator

2.2 Remote music
You can control the music of your mobile aer con-
necng to the watch.
2.3 Sleep
Sleep recording from 18:00 to 10:00. The data is
synchronized with the applicaon.
2.4 Stopwatch
You can measure me
2.5 Weather
Aer the smartwatch is connected to the applicaon
and the data is synchronized, select the weather to
see the weather condions of the day.
2.6 Find mobile phone
Once the watch is connected to the app, you can
search for your mobile by selecng nd the device
mode and your mobile will start vibrang.
2.7 Meteorology
Through the weather funcon, you can see the
indicators of ultraviolet (UV) radiaon and the air
pressure condions of the day.
2.8 Breathing
There are 3 breathing techniques: slow, moderate,
and fast where they can be selected. Adjust your

breathing according to the rhythm you have chosen.
2.9 Menu style
There are a variety of menu styles to choose from.
3.0 Sengs
1) Through the sengs you can change the language,
connect the applicaon, and synchronize the data. The
watch automacally connects to the default language
aer connecng to the mobile.
2) Change the smartwatch face, drag to the right
to select the next smartwatch face, select a face by
pressing once.
3) Screen Waing. You can select a specic me that
the screen will remain open.
4) Vibraon intensity. You can set the reminder
vibraon volume.
5) Bluetooth for calls. Bluetooth for calls can be turned
on / o
6) Password. a 4-digit password can be set (if you
forget the password, enter 8762, which can restore
access)
7) Reset to factory sengs. Click √ to enable factory
reset and click X to cancel factory reset.
Bind APP
1. APP download method
1.1 Scan the QR code to download
1.2 Applicaon market search and download
Android side:

On Google play search WearPro to download it
IOS side:
On App Store search WearPro to download it
Android phones: When WearPro is installed the applica-
on icon is as shown in the gure
Apple phones: When WearPro is installed the applicaon
icon is shown in the gure:
2.Bind Bluetooth
2.1 Not connected:
Aer turning on the watch, Bluetooth is always on in the
device. Aer opening the applicaon, go to the “Device”
opon and click on “Connect now”, select and click on
the corresponding watch device name, to successfully
connect the watch to the applicaon.
2.2 Connected:
The smartwatch was successfully connected to the
applicaon and the me / date were synchronized at the
same me.
2.3 Bind audio call
On the Home screen, swipe from le to right and tap
the phone icon to change the source of the call. On the
Home screen, drag downwards to open the quick sengs
and press . You can see the Bluetooth name and MAC
address of the device. Turn on Bluetooth on your mobile
phone to search for the device name and tap connect.
3. Find the device
Once your watch is successfully connected to the app, you
can select the nd mode and the watch will start vibrang
to locate it.

4. Camera
Select the camera mode, tap the icon to take a photo
remotely and the photo will be automacally saved in the
mobile photo album.
5. Data synchronizaon
When the smartwatch is connected to the applicaon, the
watch data can be synchronized with the applicaon.
6. Raise your hand to brighten the screen
Wear the watch properly on your wrist. When you select
the opon, you can see the me simply by raising your
hand.
7. Do not disturb mode
In the applicaon you can set a specic me of day, not to
receive calls and nocaons on your watch.
8. Daily alarm clock
You can set a specic me in the app to nofy you.
9. Sedentary reminder
Set the start-end me and idle me (minutes) in the app,
click to enter the repeat seng only once, or select the
idle reminder date (week). When the device detects a
sedentary state, the smartwatch will vibrate and a seden-
tary life alert icon will be displayed.
10. Drink water reminder
Warns you about water consumpon at a specic me.
11. Dial push
There is a selecon of dials from the collecon
Log in to the applicaon, go to “Device” -> “Call” -> Select
the dial you want.
12. Firmware version
The watch version is displayed and the user can choose to
upgrade the rmware version.