DAS.4 SG18 User manual

SG18 User Manual

Operaon Guide:
Home buon: Long press the buon to power
ON/OFF, short press the buon to lighten the
screen.
Touch instrucons: Tap to enter and swipe
right to return; Slide down enter the status bar
under the home screen; slide right to enter the
Mulple sport mode; slide le to enter the main
menu; slide up to nocaon center.
Changeable band: A switch pin at the connecon
between watchcase and band, slide it to the
middle to take o/on the band.
Charging instrucon: this product is using
magnec force charging. Supports 5V mobile
phone charger and computer USB interface. Put
the charging cable to the back of the device’s
charging pins, it will charge automacally. It
usually takes 2 hours to fully charge and the de-
vice’s standby me up to 30 days, 5-10 days for
working. Do not use the watch when charging.
You should place the magnec charger cor-
rectly at the pins. If the charger is not properly
aligned with the pins, it will cause the circuit
to burn.

The watch can connect with your phone by
downloading the applicaon “Weart 2,0”
using one of the methods below:
1)Android / IOS : Scan the QR code using any
scanner, to download the app “Weart 2,0 Pro”.
2)Android Phone: search and download “Wear-
Fit 2.0” app from Google Play;

iOS phone: search and download “WearFit 2.0”
app from Apps Store;
Aer installaon, turn on cellphone Bluetooth
and “WearFit 2.0” App, conrm the nocaons
and all others permission “WearFit 2.0” asks are
enabled, Bind bracelet, nd “S20” device (Some
phone brands need turn on the GPS in the smart
phone before binding) and tap connect.
● Firmware upgrade: When Bluetooth is
connected, in “WearFit 2.0”, Tap Mine- “Device
management” - “Firmware update”, if there is
new rmware available, click to update to the
latest watch rmware version.
Noce: If it is unsuccessful to upgrade, please
wait for the watch to run out of baery. Charge
again and then reboot the watch again, search
Bluetooth device Huntersun-BLE connect and
upgrade again.
Due to Bluetooth versions being dierent in
dierent smartphones, should you face connec-
vity issues, restart the bluetooth service and
try to connect again.

Main Features:
● Language/Time/Date: These sengs will
be synchronized when you successfully con-
nect the watch with your smartphone.
● Standby watch face: You can change the
watch face by pressing on the screen for 2
seconds and then selecng the watch face
you want.
● Status bar: Slide down to enter the standby
interface with Bluetooth status, QR code
(scan with mobile phone and download
“WearFit 2.0”), brightness adjustment and
baery charge
● Nocaons: Slide right into the noca-
on, nocaons synchronous from phone,
such as calls, WhatsApp, SMS, WeChat
messages, recent 8 alerts can be shown,
when calls and messages are coming, the
watch will vibrate. remind, support decline a
call. You can also decline a call directly from
your watch.
● Pedometer, Distance,Calorie: Monitoring
daily steps, mileage, calories. Reset at 12
o’clock each day. Supports 7 days of records
data in the watch.

● Sports: Mulple sports-mode, select one
to start, slide right to pause the exercise. It
records duraon, calorie consumpon and
heart rate etc. data.
Heath care:
● Heart rate: When this funcon is acvated,
the heart rate is being measured by the
device scanning the surface capillary of the
skin with green opcal diodes. Please allow
for about 2 seconds to start measuring and
recording. Slide to other menus to stop mea-
suring. The average BPM depends on your
age, gender and physical condion. Please
refer to your doctor for further informaon
Please note: The device is not a medical de-
vice. Any values shown are for reference only.
● Blood pressure: please put your hands at
on a surface and do not move. When this
funcon is acvated it needs about 45 - 50
seconds of measuring to provide a result
Please note: The device is not a medical de-
vice. Any values shown are for reference only.

● ECG: The device combines an opcal heart
rate sensor and ECG sensor to show informaon
about the user’s heart funcon for reference.
When this funcon is acvated it needs about
30 seconds of measuring and reading to provide
a result.
Please note: The device is not a medical device.
Any values shown are for reference only.
● Blood Oxygen: Blood oxygen (SP02H) level is
the amount of oxygen circulang in the blood.
Please refer to informaon about healthy or
abnormal blood oxygen percentage for your age
group and gender online and/or ask your medical
praconer for advice.
Please note: The device is not a medical device.
Any values shown are for reference only.
● Sleep monitor: Sleep monitoring will be au-
tomacally acve from 10:00pm to 8:00am the
next morning. You can check the details of sleep
quality with the WearFit2.0 app in the phone.
● Stopwatch: Press the start and pause, again
press for stop.

● Remote control music: Play the music at
phone side, control at the watch side.
● Remote camera: Enter WearFit 2.0, tap + enter
the camera funcon, shake the watch to take a
photo.
● About: Tap to enter, check device model,
rmware version, Bluetooth address.
● Reset: Tap to reset all data (factory mode).
● Alarm: Set several alarm clocks through the
App in the phone.
● Sedentary Reminder: You can set me to
remind yourself stand up.
● Find your phone: Tap it and phone makes a
ringtone alert.
● Wrist bright screen: Set it in the App, it takes
more power consumpon when it is on.
● Units Setup: Metric or Imperial system.
● Data transmission: All the data will be saved

in the device. No maer pedometer, heart rate,
sleep quality, and mul-sport mode, all the data
can be transmied to the APP in the phone.
Warranty
we do not oer free warranty, as follows:
1). Disassemble or ret the product.
2). Caused by immodesty drop.
3). All arcial damage or misuse (such as:
make water into the host, the external force
shaer, scratch damage of peripheral compo-
nents, etc.), all these are beyond the scope of
the warranty.
3. When ask for free warranty, you must pro-
vide a warranty card with the seal of purchase
place and purchase date.
4. If you met problems during use, please
contact the shop customer service which you
bought from.
IP68 – Only dustproof
and only accidental con-
tact with fresh water –
hand washing.

www.das-4.com