DAS.4 ST08 User manual

USER MANUALUSER MANUALST08

Package: One gi box, one user manual, one
smart band unit.
Remark: The product is waterproof (IP68), You
can wear it while washing hands and, in the rain,
– Seawater is prohibited.
Do not use the product when having a hot show-
er. The steam will penetrate the waterproong
and will cause the circuit to burn. All these are
beyond the scope of the warranty.
Buons Instrucon:
Top buon: Keep the buon pressed for a few
seconds to power ON/OFF the device. Short
press the buon when the device is ON, to light
the screen.
Boom buon: Flashlight turn ON/OFF
Touch instrucons: swipe up to return to the
home screen; slide down to enter the status ba
slide le to enter the nocaon center slide
right to enter the main menu.
Changeable band: A switch at the connector
between band and watch case, push it to the
middle to take o the exisng band, same way to
set a new band.

Charging instrucon: this product adopts is using
magnec force charging. Supports 5V mobile
phone charger and computer USB interface. Put
the charging cable to the back of the device’s
charging pins, it will charge automacally. It
usually takes 2 hours to fully charge and the de-
vice’s standby me up to 30 days, 5-10 days for
working. Do not use the watch when charging.
You should place the magnec charger cor-
rectly at the pins. If the charger is not properly
aligned with the pins, it will cause the circuit
to burn.

The watch can connect with your phone by
downloading the applicaon “FitCloud PRo”
using one of the methods below:
1) Android / IOS : Scan the QR code using any
scanner, to download the app “FitCloud Pro
2)Android: search and download “FitCloudPro”
app from Google Play;
iOS: search and download “FitCloudPro” app from
Apps Store;
Aer installaon, turn on phone Bluetooth and
FitCloudPro App, conrm the nocaons and all

others permission “FitCloudPro” asks are enabled,
and ll up personal informaon. Tap “Add device”,
search “L15” device (turn on the GPS in the smart
phone before binding) and tap connect.
How to set the nocaon reminder: In “FitCloud-
Pro” – Device - Nocaons, select the correspond-
ing Apps, turn ON the switch.
What should I do if I don’t receive the nocaons?
1.For the watch to be able to display nocaons
from your phone, it must be connected with your
phone through the app. Once connected, select
which nocaons you want your watch to display
through the app.
2. If sll not receiving any nocaon aer step
(1). Reset the watch to factory seng, enter the
Bluetooth sengs in the phone, and check if it’s
connected device “L15”. If so, please unpair, turn
OFF the phone’s Bluetooth, then turn it ON again
to reconnect.
3. If all above 2 steps cannot solve the nocaon
issue, uninstall the “FitCloudPro” and download it
again. Remember to give all the required permis-
sions when prompted.
Firmware upgrade: When bluetooth is connected,
in “FitCloudPro”, Tap “Device- “Firmware version”- it

will remind you if there’s a new version available for
update. During the updang, it will show a process
bar, wait unil the process is completed. Watch will
restart and reconnect to the phone App. Do not op-
erate the watch during the update. It takes 3-5 mins.
Main Features:
Language/Time/Date
These sengs will be synchronized when you
successfully connect the watch with your smart-
phone.
Standby watch faces:
You can change the watch face by pressing on the
screen for 2 seconds and then selecng the watch
face you want.
Status Bar:
Swipe down from the standby state screen. The
following will be shown
Bluetooth connecon status / baery status /
brightness adjustment/ QR code for FitCloudPro
download.
Nocaons: Synchronizing and display of app
nocaons such as Facebook, WhatsApp,
SMS, Email etc., between the mobile phone and
the Smart Watch. Up to 8 nocaons can be
displayed on the watch. Please adjust the sengs
in the Fundo app and allow nocaons to be dis-

played (app permissions). It is You able to decline
incoming calls via watch.
Acvity info:
Showing the workout and health data including
Steps, Distance, Calories consumpon. This data
will be saved unl midnight (12:00 am) every day
and then reset to 0 values for the coming day. You
can look up previous data in History.
Exercise:
Select a sports mode to record your workout. Tap
this icon for more modes, tap center to enter,
tap next/back page, tap
return. The recording will be paused when press-
ing the power buon. You can choose to save,
delete or connue the measuring.
Health:
Heart Rate Monitoring Funcon:
Take a single measurement of your heart rate. You
should see a green light being emied from the
boom of the watch. For average BPM you should
consult your doctor as normal BPM can dier ac-
cording to your age, gender and physical condion.
Please note: The device is not a medical device. Any
values shown are for reference only.
Blood Pressure Funcon: Please put your hands at

on a surface and do not move. When this funcon is
acvated it needs about 45 - 50 seconds of measur-
ing and reading to provide a result
Please note: The device is not a medical device. Any
values shown are for reference only.
Electrocardiogram (ECG) Funcon:
The device combines an opcal heart rate sensor
and ECG sensor to show informaon about the us-
er’s heart funcon for reference. When this funcon
is acvated it needs about 30 seconds of measuring
and reading to provide a result at the App to review.
Please note: The device is not a medical device. Any
values shown are for reference only.
Blood Oxygen Funcon:
Blood oxygen (SP02H) level is the amount of oxy-
gen circulang in the blood. Please refer to infor-
maon about healthy or abnormal blood oxygen
percentage for your age group and gender online
and/or ask your medical praconer for advice.
Please note: The device is not a medical device. Any
values shown are for reference only.
Sleep monitor: Sleep monitoring will be automat-
ically acve from 10:00pm to 8:00am the next morn-
ing. You can check the details of sleep quality with
the Fundo app on the phone.

Stopwatch Funcon:
Press the start and pause, again press for stop.
Remote Control (Music):
Allows to acvate and control music playback on the
phone via the Smart Watch (a music playback app
should be installed on the phone).
About: Check model number, Bluetooth address,
version number
Reset: Tap to reset all data (factory mode).
Alarm Funcon: You can set several alarm mes via
the Fundo app on the phone.
Sedentary, drink reminder: Via the App set a me
for exercise and/or a reminder to drink.
Find Phone Funcon: As the device and phone are
connected, the Find Phone Funcon can support
locang your mobile phone. Tap “Find Phone” and
locate your phone via the ringtone/sound coming
from your phone.
Wrist Wakeup: You can “wake up” the watch with
wrist movement. Please enable this funcon with
the app. Please note that this might increase power
consumpon.

Normal Wear and Tear
Normal wear and tear of the product or parts of the
product is not covered by this warranty.
Not Included in the Warranty Terms
This warranty does not include:
•Any defects caused by an accident, misuse, abuse,
improper installaon or operaon, lack of reason-
able care, unauthorized modicaon, loss of parts,
tampering or aempted repair by a person not
authorized by the distributor.
•Any product that has not been installed, operated
or maintained in accordance with the manufacturer
‘s instrucon manual provided with the product.
•Any product that has been used for purposes other
than the intended use.
•Any damage caused by improper power input or
improper cable connecon.
IP68 : Only dustproof and only accidental
contact with fresh water – hand washing.
Seawater is prohibited.
www.das-4.com