DAS.4 SG48 User manual

SG48 User Manual

Introduction
Thank you for choosing our product! Please read the user manual
in order to have a complete understanding on the smartwatches
features and operation method.
The functions in the user manual may be slightly different from
the final product.
Typos and inconsistencies in this manual will be corrected in a
timely manner.
If we have updates, this manual will change without notice. Our
company reserves the right to revise the manual.
Package: One gift box, one user manual, one smartwatch, one
charging cable.
Remark: This model is dustproof and water resistant only at
accidental contact with fresh water or rain.
Do NOT wear this product when showering or swimming at the
sea. The water will surpass the proofing and there is a possibility
of shorting the circuit. The warranty does not cover you in case of
damage from the above reason.
www.das-4.com

www.das-4.com
Buttons Instruction
Top button: Turn the button around to switch between dials.
Press the button once to return to the previous screen.
Bottom button: Hold for a few second the button to turn ON/ OFF
the smartwatch. Press the button once to return to the homes
screen.
Dial: Πατήστε παρατεταμένα την κύρια οθόνη για να εισέλθετε στη
λίστα. Περιηγηθείτε αριστερά και δεξιά για να επιλέξετε ένα
καντράν.
Charging instruction: this product adopts is using magnetic force
charging. Supports 5V= 1A mobile phone charger and computer
USB interface. Put the charging cable to the back of the device’s
charging pins, it will charge automatically. It usually takes 2 hours
to fully charge. Do not use the watch when charging.
www.das-4.com
Remark: You should place the
magnetic charger correctly at
the pins. If the charger is not
properly aligned with the pins,
it will cause the circuit to
burn.

2) Search on Google Play Store / APP Store and download the
“Fundo Pro” App.
After installation, turn on phone Bluetooth and GPS. Open the
app, confirm the notifications and all others permission
“FitCloudPro” asks are enabled, and fill up personal information.
Tap “Add device”, search “W3Pro” device (turn on the GPS in the
smart phone before binding) and tap connect.
In order to use the loudspeaker and receive/ answer calls via
Bluetooth, you must also connect the smartwatch directly with
the mobile phones Bluetooth.
Go to Bluetooth--> search for the W3Pro device-->connect it.
For more information on the connection, please turn to our
website (www.das-4.com) and search the "Quick Starter Guide"
button. There you will find quick and siple steps to connect the
smartwatch with your mobile phone.
Connection
www.das-4.com
The watch can connect with your phone by downloading the
application “Fundo Pro” using one of the methods below
1) Android / IOS : Scan the QR code using any scanner, to
download the app “Fundo Pro”.

Dial: Make a call via Bluetooth.
Phonebook: Sync contacts from your smartphone.
Call logs: Sync your call history from your smartphone.
SMS: Sync all your messages (Doesn’t support iOS yet).
Notification: Sends your smartphone notifications to your watch.
Step Count: Count your daily steps.
Anti-Lost: Reminder when the smartwatch is out of range.
Language: Choose the language of the smartwatch. It is
recommended to use the English language for the functions to
display correctly.
Calendar: View the current day and month.
Calculator: Make simple calculations.
Dial: Dial numbers.
Stopwatch: Count the time.
Alarm Function: Set several alarm times via the “Fundo Pro” app
on the phone.
Main Features:
www.das-4.com

www.das-4.com
Health:
Please note: The device is not a medical device. Any values
shown are for reference only.
Heart Rate Monitoring Function:
Take a single measurement of your heart
rate. You should see a green light being
emitted from the bottom of the watch.
For average BPM you should consult
your doctor as normal BPM can differ
according to your age, gender and
physical condition.
Blood Pressure Function:
Please put your hands flat on a surface
and do not move. When this function is
activated it needs about 45 - 50 seconds
of measuring and reading to provide a
result.
Electrocardiogram (ECG) Function:
The device combines an optical heart
rate sensor and ECG sensor to show
information about the user’s heart
function for reference. When this
function is activated it needs about 30
seconds of measuring and reading to
provide a result at the App to review.

www.das-4.com
Please note: The device is not a medical device. Any values
shown are for reference only.
Blood Oxygen Function:
Blood oxygen (SP02H) level is the
amount of oxygen circulating in the
blood. Please refer to information about
healthy or abnormal blood oxygen
percentage for your age group and
gender online and/or ask your medical
practitioner for advice.
Sleep monitor:
Sleep monitoring will be automatically
active from 10:00pm to 8:00am the next
morning. You can check the details of
sleep quality with the “FundoPro” app
on the phone.
Remote Control (Camera):
Allows to activate and control the
camera on the phone via the Smart
Watch.

www.das-4.com
Any defects caused by an accident, misuse, abuse, improper
installation or operation, lack of reasonable care,
unauthorized modification, loss of parts, tampering or
attempted repair by a person not authorized by the
distributor.
Any product that has not been installed, operated or
maintained in accordance with the manufacturer ‘s
instruction manual provided with the product.
Any product that has been used for purposes other than the
intended use.
Any damage caused by improper power input or improper
cable connection.
QR Code: Scan and download the app.
Sedentary reminder: Via the App set a time for exercise.
Wrist Wakeup: You can “wake up” the watch with wrist
movement. Please enable this function with the app. Please note
that this might increase power consumption.
Reset: Tap to reset all data (factory mode).
About: Information about the smartwatch (BT name, smartwatch
name, MAC Adress).
What is NOT Included in the Warranty Terms?
This warranty does not include:

Disclaimer
1) Please ensure that Bluetooth and mobile GPS are turned on.
When searching for the device via Bluetooth, make sure that no
other device is connected. When searching for the device via
Bluetooth, keep a close distance between your mobile and
smartwatch.
2) If the Bluetooth connection is unstable during operation, try
restarting the watch and connecting it to the mobile again. Be
sure to turn on the automatic start for the smartwatch
application, in the settings of your mobile phone. Also turn off the
battery optimization (without restrictions) for the specific
application, so that the continuous application-smartwatch
communication is not interrupted.
3) If there is a problem with the watch or its use, please contact
the store where you purchased it.
4) The measurements of the watch are for reference only and not
for medical use. Please follow your doctor’s instructions and do
not use the measurements to make your own diagnosis.
5) The watch can withstand accidental contact with water.
However, it can not be used for diving or being under water for a
long time. In addition, the watch should not come in contact with
hot water, as steam can penetrate the seal and cause internal
damage.
6) The company has the right to modify the contents of this user
manual without prior notice. Some functions differ depending on
the software they carry.

7) CAUTION: Do not use a power adapter that gives more than
5v = 1A to charge the device. If you use a charger larger than 1A
for charging, the circuit and / or battery may be damaged.
8) Once the watch is charging, disconnect the cable from the
power supply to prevent a short circuit if it comes in contact with
conducting objects.
9) Do not leave the peripherals and accessories in areas where
the temperature is too high or too low. Otherwise the device may
malfunction.
10) Avoid hitting the device to reduce the risk of damage.
www.das-4.com
Only dustproof and only accidental contact with fresh water –
hand washing.
Seawater is prohibited.

FAQ
1) What can I do if the smartwatch doesn’t appear on the list with
the available devices?
First please check if the smartwatch has battery (over 20%). Then
place the smartwatch close to the mobile phone and try again. If
this problem still exists, please turn OFF and ON the mobiles
Bluetooth and try again.
2) Why is heart rate not being measured?
To make the measurement correctly, the watch must have good
contact with your skin and the hand is not in motion.
3) Why is the watch not showing the messages?
You must have the “Access to notifications” permission enabled.
You need to check that the message also appears in the
notification bar of your mobile. If it is not displayed, the message
cannot be forwarded to the watch.
Caution: Consult your doctor before starting any new physical
activity. Although the watch can measure your heart rate in real
time, it cannot be used for medical and diagnostic purposes.
The warranty terms that cover the product are
mentioned in the details on the website.
www.das-4.com