Datalogic PowerScan BC9620 User manual

PowerScan™
BC9600 & BC9620 Base Stations
QUICK REFERENCE GUIDE
Industrial Base Station/Charger
for PowerScan 9600 Family Bar Code Readers

Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno (BO)
Italia
Telefono: [phone]
Fax: [phone]
©2022-2023 Datalogic S.p.A. and /or its affiliates.
All rights reserved. Without limiting the rights under copyright, no part of this documentation may be
reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any
means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its
affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce
and transmit this documentation for the purchaser's own internal business purposes. Purchaser
shall not remove or alter any proprietary notices, including copyright notices, contained in this docu-
mentation and shall ensure that all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website (www.data-
logic.com). If you visit our website and would like to make comments or suggestions about this or
other Datalogic publications, please let us know via the "Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and
accurate, however, Datalogic shall not be liable for technical or editorial errors or omissions con-
tained herein, nor for incidental or consequential damages resulting from the use of this material.
Datalogic reserves the right to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U.
PowerScan is a trademark of Datalogic S.p.A. and/or its affiliates, registered in the U.S. All other
trademarks and brands are property their respective owners.
Patents
See www.patents.datalogic.com for patent list.
See the Regulatory Addendum included with your product for addi-
tional regulatory, safety and legal information.

QUICK REFERENCE GUIDE III
TABLE OF CONTENTS
END USER SOFTWARE LICENSE AGREEMENT............................................. IV
Software Product Policy ......................................................................................... VII
Using the BC9600 Base Station.................................................................... 1
Base Station Models.................................................................................... 2
Base Station Models ........................................................................................ 2
Connection Module Models ............................................................................. 2
Installation ................................................................................................. 3
Package Contents........................................................................................ 3
Mounting Instructions.................................................................................. 4
Permanent Mounting................................................................................... 4
Wall Mounting............................................................................................. 5
Changing the Orientation of the Positioning Tab: .......................................... 5
Portable Desktop Mounting.......................................................................... 6
Base Station Fast Release - Mounting the Plate..................................................... 6
Connection Module Fast Release - Mounting the Bracket (not valid for BC9620
models) ..................................................................................................................... 8
System Connections .................................................................................. 11
BC9681 Power Over Ethernet (PoE) Connection................................................... 15
BC9681 External Power Connection ...................................................................... 15
BC9680/BC9681 Power Over Ethernet (PoE) Connection..................................... 16
Connecting and Disconnecting the Cables............................................................. 17
Connecting BC9630 cables ............................................................................ 17
Disconnecting BC9630 cables ....................................................................... 17
Connecting BC9620 cables ............................................................................ 19
Disconnecting BC9620 cables ....................................................................... 19
Connecting BC9631 multi-interface cable .................................................... 20
Connecting BC9680 cables ............................................................................ 21
Connecting BC9681 cables ............................................................................ 21
Configuration ............................................................................................ 22
BC968X Ethernet Models........................................................................................ 22
Non-Ethernet Models ............................................................................................. 22
Datalogic Aladdin™ ....................................................................................... 22
Serial Configuration ....................................................................................... 22
Configuration Bar Codes ............................................................................... 22
Technical Specifications ............................................................................ 23
Technical Support ..................................................................................... 24
Support Through the Website ................................................................................ 24
Reseller Technical Support..................................................................................... 24
Warranty .................................................................................................. 25

EULA
IV BC9600/BC9620 BASE STATIONS
END USER SOFTWARE LICENSE AGREEMENT
(EULA) FOR THE POWERSCAN™ PM/PBT9600 PRODUCT SERIES
NOTICE TO END USER: BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR BY USING THE DAT-
ALOGIC PRODUCT THAT INCLUDES THIS SOFTWARE, THE END USER CONSENTS TO BE BOUND BY
THIS AGREEMENT. IF THE END USER DOES NOT AGREE WITH ALL OF THE TERMS OF THIS AGREE-
MENT, THEN DATALOGIC IS NOT WILLING TO LICENSE THE SOFTWARE AND THE END USER IS NOT
ALLOWED TO DOWNLOAD, INSTALL OR USE THE SOFTWARE OR THE DATALOGIC PRODUCT---
This End User License Agreement ("EULA") is between Datalogic IP Tech S.r.l. having its registered
office at Via San Vitalino 13, 40012 Calderara di Reno (Bologna), Italy ("Datalogic"), and you, either
an individual or a single entity, ("End User or "You"") who has purchased one or more PowerScan™
PBT/PM9600 ("Datalogic Product") subject to the terms and conditions provided in any relevant
purchase or sale contract. This EULA applies to the software contained in the Datalogic Product
("Embedded Software") and to any other software, to the extent applicable, offered as optional
application software ("Application Software" that together with "Embedded Software" is herein
referred to as "Software"). Any Open Source used in a conjunction with the Software is subject to the
Open Source licenses available at the following website: http://www.datalogic.com/oss
1. Grant of License
1.1 Datalogic grants to End User, a personal, non-exclusive, non-transferable, non sub licensable,
revocable, limited license to use the Software, solely on the Datalogic Product in which it is
embedded or for which it is intended for use, in machine-readable form only, solely for End
User's internal business purposes.
1.2 End Users shall not distribute, sublicense, rent, loan, lease, assign, export, re-export, resell,
ship or divert or cause to be exported, re-exported, resold, shipped or diverted, directly or
indirectly, the Software under this Agreement. End User shall not, and shall not permit others
to: (i) modify, translate, decompile, reverse engineer, disassemble, or extract the inner work-
ings of the Software, (ii) copy the functionality of the Datalogic Products; (iii) remove any pro-
prietary notices, marks, labels, or logos from the Datalogic Products; (iv) rent or transfer all or
some of the Software to any other party without Datalogic's prior written consent.
1.3. Title to the licensed Software shall be and remain with Datalogic or the third party from whom
Datalogic has obtained a license right. This Agreement does not grant to End User any intellec-
tual property rights. As used in this Agreement the term "purchase" or its equivalent when
applied to the Software shall mean "acquire under license". End User is not entitled to receipt
or use of the source code of any licensed Software.
1.4 Portions of the Datalogic Product are protected by the relevant and applicable patent and
copyright laws, international treaty provisions, and other applicable laws. Therefore, End
User must treat the Datalogic Product like any other copyrighted material (e.g., a book or
musical recording) except that End User may make one copy of the Software solely for back-
up purposes. Unauthorized duplication of the Software constitutes copyright infringement.
1.5 Any use of the Software outside of the conditions set forth herein is strictly prohibited and will
be deemed a breach of this Agreement resulting in immediate termination of this Agreement.
In the event of a breach of this Agreement, Datalogic will be entitled to all available remedies
at law or in equity (including but not limiting to immediate termination of the license without
notice, immediate injunctive relief and repossession of all Datalogic Products).
1.6 Without prejudice of the foregoing, End User grants to Datalogic and its independent accoun-
tants or consultants the right to examine End User's books, records and accounts during End
User's normal business hours to verify compliance with this Agreement. In the event such
audit discloses non-compliance with this Agreement, Datalogic shall be entitled to immedi-
ately terminate the Agreement, request End User to promptly pay all (additional) license fees
due and any further damages, if any.
2. License Fee
License fees shall be due by End User to Datalogic according to the terms provided for in the rele-
vant contract for the purchase of the Datalogic Product.
3. Termination
Without prejudice to any other rights or remedies Datalogic may have, Datalogic may terminate this
Agreement if End User fails to comply with the terms and conditions of this Agreement. Datalogic
may terminate this Agreement by offering you a superseding Agreement for the Software or any
replacement or modified version of or upgrade to the Software and conditioning your continued use

EULA
QUICK REFERENCE GUIDE V
of the Software or such replacement, modified or upgraded version on your acceptance of such
superseding Agreement. In addition, either party may terminate this Agreement at any time. Subject
to the foregoing, termination shall be effective upon notice to the other party. In the event that this
Agreement terminates for any reason, End User's license to use the Software will immediately ter-
minate, and End User must immediately stop using the Software, destroy all copies of the Software
and all of its component parts, and, upon request, provide an affidavit certifying your compliance
with the foregoing. The provisions of Sub-sections 1.2, 1.3, 1.4, 1.5, 4, 5, 6, 8, and 12 shall survive
termination of this Agreement.
4. Limited Warranty
Datalogic warrants that, under normal use and operation, the Software will conform substantially to
the applicable Datalogic Product documentation for the period specified in the same, provided that
the Software is used with the Datalogic Product. Datalogic's entire liability and End User's sole and
exclusive remedy for any breach of the foregoing limited warranty will be, at Datalogic's option, the
provision of a downloadable patch or replacement software.
Datalogic does not warrant (i) that Software will meet End User's requirements; (ii) that Software
will be uninterrupted or defect error free; (iii) any non conformity derived from unauthorized use,
and/or improper installation or repair not in compliance with Datalogic Product documentation. End
User agrees that the existence of such non conformities or errors and Datalogic's inability to remedy
such errors shall not constitute a breach of this Agreement.
EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND
DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH
RESPECT TO THE DATALOGIC PRODUCT OR SOFTWARE, AND SPECIFICALLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. Limitation of Liability
EXCEPT AS PROVIDED IN THIS AGREEMENT, NEITHER DATALOGIC NOR ITS LICENSORS SHALL BE LIA-
BLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S
LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI-
GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE
PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES
SHALL DATALOGIC OR ITS LICENSORS BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROF-
ITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSE-
QUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR OTHER SIMILAR
DAMAGES, EVEN IF DATALOGIC OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. END USER MUST BRING ANY ACTION UNDER THIS AGREEMENT WITHIN 12
(TWELVE) MONTHS AFTER THE CAUSE OF ACTION ARISES.
6. Indemnification
To the maximum extent permitted by law, End User agrees to defend, indemnify and hold harmless
Datalogic, its affiliates and their respective directors, officers, employees and agents from and
against any and all claims, actions, suits or proceedings, as well as any and all losses, liabilities, dam-
ages, costs and expenses (including reasonable attorney's fees) arising out of or accruing from or
related to Licensee's failure to comply with the terms of this Agreement, including but not limited to
(1) non compliance with any applicable laws or regulations with Datalogic product documentation,
(2) unauthorized use or disclosure of Software, and (3) use of Software in combination with soft-
ware, hardware, systems, or other items not provided by Datalogic.
7. Support
End User may request support for Software from Datalogic at Datalogic's standard support fees and
under Datalogic's standard support terms and conditions in effect at the time the support is
requested.
8. Government Restricted Rights; International Use
8.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the
restrictions for computer software developed at private expense as set forth in the U.S. Fed-
eral Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical
Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.
8.2 If End User is using the Datalogic Product outside of the United States, End User must comply
with the applicable local laws of the country in which the Datalogic Product is used and with
U.S. export control laws,. Without prejudice of the foregoing, the End User agrees to not
export or re-export the Software, any part thereof, or any process or service that is the direct
product of the Software to any country, person or entity subject to U.S. export restrictions.

EULA
VI BC9600/BC9620 BASE STATIONS
End User specifically agrees not to export or re-export any of the Software: (i) to any country
to which the U.S. has embargoed or restricted the export of goods or services or to any
national of any such country, wherever located, who intends to transmit or transport the Soft-
ware back to such country; (ii) to any person or entity who you know or have reason to know
will utilize the Software in the design, development or production of nuclear, chemical or bio-
logical weapons; or (iii) to any person or entity who has been prohibited from participating in
U.S. export transactions by any federal agency of the U.S. government. End User warrants and
represents that neither the U.S. Commerce Department, Bureau of Export Administration nor
any other U.S. federal agency has suspended, revoked or denied its export privileges.
9. Third Party Software
The Datalogic Product may contain one or more items of third party software which use is governed
by separate third party license, unless otherwise stated.
10. Open Source Software
Portions of the Software include or operate with Open Source software (“Open Source Software”).
Open Source Software is software covered by a publicly available license governed solely under
Copyright law, whereas the complete terms and obligations of such license attach to a licensee
solely through the act of copying, using and/or distributing the licensed software, such obligations
often include one or more of attribution obligations, distribution obligations, copyleft obligations,
and intellectual property encumbrances. The use of any Open Source Software is subject to the
terms and conditions of this Agreement as well as the terms and conditions of the corresponding
license of each Open Source Software package. If there is a conflict between the terms and condi-
tions of this Agreement and the terms and conditions of the Open Source Software license, the
applicable Open Source Software license will take precedence. Datalogic is required to reproduce
the software licenses, acknowledgments and copyright notices as provided by the authors and own-
ers, thus, all such information is provided in its native language form, without modification or trans-
lation. Please reference and review the above mentioned information to identify which Open Source
Software packages have source code provided or available.
11. Notices
All notices required or authorized under this Agreement shall be given in writing, and shall be effec-
tive when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of
Datalogic IP Tech S.r.l., Legal & IP Department, Via San Vitalino 13, 40012 Calderara di Reno (Bolo-
gna), Italy, or such other address as may be specified by Datalogic in writing.
12. General Provisions.
12.1. Entire Agreement; Amendment. This document contains the entire agreement between the
parties relating to use of the Datalogic Products and the licensing of the Software and super-
sedes all prior or contemporaneous agreements, written or oral, between the parties concern-
ing the use of the Datalogic Products and licensing of the Software. This Agreement may not
be changed, amended, or modified except by written document signed by Datalogic.
12.2. Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not
prevent the party's later enforcement of such terms and conditions.
12.3. Governing Law; Venue: End User agrees to the application of the laws of the country in which
End User obtained the license to govern, interpret, and enforce all of End User’s and Data-
logic’s respective rights, duties, and obligations arising from, or relating in any manner to, the
subject matter of this Agreement, without regard to conflict of law principles. The United
Nations Convention on Contracts for the International Sale of Goods does not apply.
All rights, duties, and obligations are subject to the courts of the country in which End User
obtained the license. For licenses granted by Licensee who operates in the countries specified
below, the following terms applies.
For Americas:
This Agreement is governed by the laws of the State of Oregon. This Agreement and the rights of the
parties hereunder shall be governed by and construed in accordance with the laws of the State of
Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of
the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction
over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute
discretion, to initiate proceedings in the courts of any other state, country, or territory in which End
User resides, or in which any of End User's assets are located. In the event an action is brought to

EULA
QUICK REFERENCE GUIDE VII
enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reason-
able attorneys’ fees, both at trial and on appeal.
For Europe, Middle East and Africa:
This Agreement is governed by the laws of Italy. This Agreement and the rights of the parties here-
under shall be governed by and construed in accordance with the laws of Italy, without regard to the
rules governing conflicts of law. Italian Court of Bologna shall have exclusive jurisdiction over all
matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discre-
tion, to initiate proceedings in the courts of any other state, country, or territory in which End User
resides, or in which any of End User's assets are located. In the event an action is brought to enforce
the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable
attorneys’ fees, both at trial and on appeal.
For Asia- Pacific Countries:
The validity, interpretation and construction of the Agreement shall be governed by and construed
in accordance with Laws of the Republic of Singapore. Parties expressly disclaim the application of
the United Nations Convention for International Sale of Goods.
Any dispute arising out of or in connection with this contract, including any question regarding its
existence, validity or termination, shall be referred to and finally resolved by arbitration adminis-
tered by the Singapore International Arbitration Centre (“SIAC”) in accordance with the Arbitration
Rules of the Singapore International Arbitration Centre ("SIAC Rules") for the time being in force,
which rules are deemed to be incorporated by reference in this clause. The seat of the arbitration
shall be Singapore.
The number of arbitrators will be three, with each side to the dispute being entitled to appoint one
arbitrator. The two arbitrators appointed by the parties will appoint a third arbitrator who will act as
chairman of the proceedings. Vacancies in the post of chairman will be filled by the president of the
SIAC. Other vacancies will be filled by the respective nominating party. Proceedings will continue
from the stage they were at when the vacancy occurred. If one of the parties refuses or otherwise
fails to appoint an arbitrator within 30 days of the date the other party appoints its, the first
appointed arbitrator will be the sole arbitrator, provided that the arbitrator was validly and properly
appointed. All proceedings will be conducted, including all documents presented in such proceed-
ings, in the English language. The English language version of these terms and conditions prevails
over any other language version.
12.4. Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of this
Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial
and on appeal.
- END -
Software Product Policy
Datalogic reserves the right to ship its products with the latest version of soft-
ware/firmware available. This provides our customers with the very latest in
Datalogic software technology.
The only exception to this policy is when the buyer has a signed contract with
Datalogic that clearly defines the terms and conditions for making software/
firmware changes in products shipped to the buyer.
To arrange for a Software Maintenance and Support Agreement please con-
tact your Datalogic sales person.

EULA
VIII BC9600/BC9620 BASE STATIONS
NOTES

QUICK REFERENCE GUIDE 1
POWERSCAN™ BC9600 BASE STATIONS
USING THE BC9600 BASE STATION
The BC9600 base station, when paired with one or more PowerScan™ PM/
PBT9600 readers, builds a Cordless Reading System for the collection, decod-
ing and transmission of bar code data. It can be connected to a Host PC via
RS232, USB, USB Type C or Ethernet, depending on the interchangeable con-
nection module.
With the adoption of the Wireless Power Transfer technology, the base sta-
tion can charge the battery of the gun without contacts, with a performance
depending on the power supply type used.
The label on the base station has LED indicators and a touch button. Touch
the button for 2 seconds and all properly configured and switched on scan-
ners (with battery profile different from Max Autonomy) that are linked to
that base station and within the radio range coverage, will emit a beep and
blink within 5 seconds. This feature is useful to:
•verify which scanners are linked to a particular base station;
•detect a scanner forgotten somewhere.
The LEDs signal the BC9600 status, as explained below.
LED STATUS
Green LED Solid green: the base station is powered.
Blinking: the base station is receiving data
Lateral Light
Bands
Indicates the state of the battery charge.
Orange slow blinking: battery level is under 50%,
the reader is charging.
Green slow blinking: battery level is over 50%, the
reader is charging.
Solid Green: the battery of the reader is fully charged.
Ethernet
(Ethernet
models only)
- BF LED (red/green): network status;
- LINK LED (yellow/green): link activity;
- SF LED (red/green): module status;
- PWR LED (green): power ON (located on the
connection module this LED is not visible when
installed in the cradle).

Base Station Models
2 BC9600/BC9620 BASE STATIONS
BASE STATION MODELS
Each base station is composed of a cradle which must be connected to a con-
nection module, depending on the interface desired and on the IP (water and
dust) protection grade.
The base station and connection module models are listed below.
Base Station Models
BC9600-433 BASE/CHARGER 433MHZ w/o conn. module
BC9600-910 BASE/CHARGER 910MHZ w/o conn. module
BC9630-433 BASE/CHARGER 433MHZ M-INT
BC9630-910 BASE/CHARGER 910MHZ M-INT
BC9631-433 BASE/CHARGER 433MHZ M-INT IP65
BC9631-910 BASE/CHARGER 910MHZ M-INT IP65
BC9680-433 BASE/CHARGER 433MHZ ETH/PROFINET
BC9680-910 BASE/CHARGER 910MHZ ETH/PROFINET
BC9681-433-N100 BASE/CHARGER 433 ETH/PROFINET IP65
BC9681-433-N200 BASE/CHARGER 433 ETH/ETH IP IP65
BC9681-910-N100 BASE/CHARGER 910 ETH/PROFINET IP65
BC9681-910-N200 BASE/CHARGER 910 ETH/ETH IP IP65
BC9600-BT BASE/CHARGER BT NO-INT w/o conn. module
BC9630-BT BASE/CHARGER BT M-INT
BC9631-BT BASE/CHARGER BT M-INT IP65
BC9680-BT BASE/CHARGER BT ETH/PROFINET
BC9681-BT-N100 BASE/CHARGER BT ETH/PROFINET IP65
BC9681-BT-N200 BASE/CHARGER BT ETH/ETH IP IP65
BC9620-430 BC9620 BASE/CHARGER 433MHZ USB ONLY
BC9620-910 BC9620 BASE/CHARGER 910MHZ USB ONLY
BC9620-BT BC9620 BASE/CHARGER BT USB ONLY
Connection Module Models
CM9630 CONN MOD M-INT
CM9631 CONN MOD M-INT IP65
CM9680 CONN MOD ETH/PROFINET
CM9681-N100 CONN MOD ETH/PROFINET IP65
CM9681-N200 CONN MOD ETH/ETH IP IP65

Installation
QUICK REFERENCE GUIDE 3
INSTALLATION
To set up your BC9600 base station you must:
1. Physically install it.
2. Make all system connections.
3. Configure it.
PACKAGE CONTENTS
The base station package contains the following items:
•BC9600 Base Station (with Desktop Positioning Tab installed)
•1 Mounting plate

Mounting Instructions
4 BC9600/BC9620 BASE STATIONS
MOUNTING INSTRUCTIONS
The base station can be either set on or mounted to a flat surface for desktop
usage, or affixed vertically to a wall.
Depending on the model, the appropriate connection module is already
installed.
PERMANENT MOUNTING
For either desktop or wall mounting, the base station can be fastened directly
to a flat surface using screws (not included).
NOTE: When the base station is mounted on vertical surfaces, perma-
nent mounting is always required.
NOTE: For vertical installation, do not exceed two meters in height.
NOTE: When mounting on drywall, the base station should be screwed
to a wall stud or supporting beam for additional support.
Screw
Position Screw Position
Screw
Position
BC9630 BC9620

Wall Mounting
QUICK REFERENCE GUIDE 5
WALL MOUNTING
The base station contains a reversible positioning tab for horizontal or vertical
mounting.
Figure 1 - Positioning Tab
When shipped, the base station has the positioning tab installed in the Desktop
position (horizontal). For vertical installation, the positioning tab must be rotated .
Changing the Orientation of the Positioning Tab:
1. Remove the screw holding the tab in place. Keep the screw for reuse.
2. Carefully lift the tab out.
Desktop Positioning Tab (Horizontal) Wall Positioning Tab (Vertical)

Portable Desktop Mounting
6 BC9600/BC9620 BASE STATIONS
3. Rotate the tab until you will see "WALL" tooth, put the rotated tab into
place and secure it with the screw.
PORTABLE DESKTOP MOUNTING
For desktop mounting, if portability of the base station is required, the
mounting plate can be used. There are two ways this can be done: (1) base
station fast release by first fixing the mounting plate onto a flat surface so the
base station can be slid off and on, or (2) connection module fast release by
fixing the mounting plate to the connection module and then fixing both of
them onto a flat surface so only the cradle can be slid off while the connection
module will remain on the desk.
Base Station Fast Release - Mounting the Plate
1. Affix the mounting plate onto the desired mounting surface using four
screws through the holes highlighted in the figure below.

Portable Desktop Mounting
QUICK REFERENCE GUIDE 7
2. Remove the adhesive strips protecting the mounting tabs on the base sta-
tion.
3. Align the base station with the mounting plate until you see the sphere
inside the bigger hole on the left.
Protective Strips

Portable Desktop Mounting
8 BC9600/BC9620 BASE STATIONS
4. Move the base station down until the sphere is aligned with the smaller
hole.
Connection Module Fast Release - Mounting the Bracket (not
valid for BC9620 models)
1. Remove the protective strips.
2. Unscrew the connection module from the base station.
3. Screw the mounting plate to the connection module.
23

Portable Desktop Mounting
QUICK REFERENCE GUIDE 9
4. Unlock the lever and remove the connection module from the base sta-
tion.
5. Screw the connection module and mounting plate sub-assembly to a flat
surface using four screws as shown in the figure below.
6. With the lever still unlocked, align the base station with the connection
module until you see the sphere inside the bigger hole on the right.
Screws Position Screws Position

Portable Desktop Mounting
10 BC9600/BC9620 BASE STATIONS
7. Move the base station up until the sphere is aligned with the smaller
hole, then lock the lever to secure the connection module.
Lock the lever

System Connections
QUICK REFERENCE GUIDE 11
SYSTEM CONNECTIONS
The BC9620 and BC9630 (BC9600 + CM9630 connection module) provide a
multi-interface connector (BC9630) / USB cable (BC9620) for connections to a
host and a power supply connector for an external power supply.
To unlock the USB cable of BC9620, push the button shown in the picture and
extract the cable.
To unlock the multi-interface cable of BC9630, first lift the lever and then
extract the cable, as indicated by the label next to the lever.
Figure 2 - BC9620 connection module
Figure 3 - BC9630 connection module
CAUTION: Connections should always be made with power off.
USB cable only
Power adapter cable
Unlock Button
Multi-interface
cable
Power adapter cable
Unlock Label Unlock Label

System Connections
12 BC9600/BC9620 BASE STATIONS
The BC9631 (BC9600 + CM9631 connection module) provides a single multi-
interface connector. Power is supplied by the host (USB) or by an external
power supply connected to the cable.
Figure 4 - BC9631 connection module
Power adapter + multi-interface cable