Unitech RG760 User manual

Package
Please make sure the following contents are in the
gun grip gift box. If something is missing or damaged,
please contact your unitech representative.
RG760 UHF RFID gun grip
Wrist Strap
RFID Tags
Quick Start Guide
RG760 UHF RFID Gun Grip
Quick Start Guide
V1.1
How to download RFID Reader App on PA760
Before starting to use UHF RFID gun grip,
please download RFID Reader on PA760.
1). Connect PA760 with UHF RFID gun grip.
2). Turn on PA760 and go to settings and tap App Update Center.
Make sure WiFi is connected.
3). On App Update Center, tap NOT INSTALLED to search for the
App RFID Reader.
4). Download RFID Reader and then enable it.
Note :
￭The gun grip is applicable to the terminal with or without the
bumpers on. (Selected by gun grip P/N)
￭ It is strongly recommended to use the terminal with 6000mAh
battery.
￭ Please make sure PA760 OS version requires MR3 or higher.
￭ To work UHF RFID gun grip properly, please make sure the
battery of PA760 should be 10% or more.
How to use RFID Reader App on PA760
1). Connect PA760 with the UHF RFID gun grip.
Turn on PA760 and tap on the App “RFID Reader”.
2). Region: Please choose the region based on the country.
And then tap Connect to start.

3). Tap for more settings.
And then tap operation mode to switch
the other read mode.
￭Rapid Read
Read as many tags as quick as possible
(Parameters cannot be adjusted)
￭Custom
Allow users to save their own setting parameters
￭Default : Cycle Count
(Reading up to 6 meters away)
Read as many unique tags as possible
(Parameters cannot be adjusted)
How to switch to barcode scan
Click the box to enable barcode scan.
Caution :
Pogo pins may heat up after operating for long
p
eriods of time.
Scan Result :
￭RFIDScan ￭Barcode Scan
CAUTION!  To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with
no communication, short circuited, overheated and so on.
 If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
http://www.ute.com/
Copyright 2019 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.