dB Technologies digipro K Series User manual

B
d
I N O SCG O THLEEI N O SCG O THLEE
B B
d d
TECHNOLOGIESTECHNOLOGIES
SERIESSERIES
PROFESSIONAL
ACTIVE SPEAKER
PROFESSIONAL
ACTIVE SPEAKER
K300K300
MANUALE D’USO
USER MANUAL
BEDIENUNGSANLEITUNG
CARACTERISTIQUES TECHNIQUES
Made in Italy
COD. 420120172 rev.5
digital power
RR
A.E.B. INDUSTRIALE s.r.l.
Via Brodolini, 8 - 40056 Crespellano (Bo) - ITALIA
Tel. + 39 051 969870 - Fax. + 39 051 969725
Internet: www.dbtechnologies.com
E-mail: [email protected]

REFLEX HOLES
HANDLE FIXING EXTERNAL
(OPTIONAL) HANDLE
FASTENING THE
THREADED INSERT
BRACKET (M8)
30° PLANE
AMPLIFIER
WOOFER 6,5” DOME 1”
FASTENING THE
THREADED INSERT
BRACKET (M8)
COMMANDS AND FUNCTIONS
1) “VOLUME” CONTROL
The knob regulates the diffuser's volume.
This control does not affect the output “LINK” levels.
2) “LIMITER” INDICATOR LIGHT
The “LIMITER” indicator light comes on red during start (for a few seconds) and
when the internal audio limiter engages. This avoids the amplifier's distortion and
protects the loudspeakers against overloads.
3) SENSITIVITY SWITCH
Position the switch in LINE to use a line level source (0 dB) or MIC to use a
microphone.
4) “READY” INDICATOR LIGHT
The “READY” indicator light comes on green to indicate that the amplifier is switched
on and it is working properly.
5) “BALANCED INPUTS LINK” CONNECTORS
These balanced inputs can be used to connect balanced or unbalanced
microphones or audio sources at line level (0dB) (eg. preamplifier, mixer, recorder,
CD player, musical instrument, ...).
The balanced connector is connected in parallel and can be used to send the audio
signal to other amplified speakers, recorders or supplementary amplifiers.
7) POWER SWITCH “POWER”
This switch can be used to switch the diffuser on and off.
8) FUSE CARRIER “FUSE”
Mains fuse housing.
9) POWER CABLE SOCKET “MAINS”
Used for connecting the power cable supplied.
6) “STEREO CD-AUX” INPUT CONNECTORS
Through the RCAphono connectors, this input permits easy connection of CD, DAT,
cassette players, etc.... .
TECHNICAL SPECIFICATION
EnglishEnglishEnglish
4
3
EnglishEnglishEnglish
user manualuser manual
DESCRIPTION
The K300 speaker uses a digital amplifier of DIGIPRO ® series of next generation with
cutting edge power to 120W.
These highly efficient amplifiers provide high power with limited weight and dimension.
Thanks to the low power dissipated, the cooling of the amplifier module does not require a
fan.
The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover
of the acoustic components, the frequency response, the limiter, and the phase alignment.
The correct switch on of the amplifier is ensured by an initialization procedure; during this
test stage the LEDs ( LIMITER ), located on the amplifier module, remain
off for approx. 2 sec.
At the end of the switch on procedure, on the amplifier module, the READY green LED
blinks slowly, in the absence of the signal.
During normal operation the "READY” green LED blinks according to the song / sound
reproduction in use.
“ ” and “READY”
“”
PUSH
MAX
0
dd
BB
TECHNOLOGIES
VOLUME
LIMITER
READY
MIC-40dB
LINE-3dB
BALANCED
INPUTS
LINK
1
2
3
1= GND
3= COLD
2= HOT
FUSE MAINS
LEFT RIGHT
STEREO CD - AUX
INPUTS
POWER
ON
LINE
MIC
2
1
3
SERIALNUMBER
100-120V~ 50-60Hz
220-240V~ 50-60Hz
(FUSET1A 250V~)
(FUSET500mA 250V~)
MODULEPOWER
CONSUMPTION
160WMAX
“CAUTION”
TOPREVENT ELECTRICAL SHOCK
DONOT REMOVE COVER
“AVIS”
RISQUEDE CHOCH ELECTRIQUE
NEPASOUVRI R
Internalvoltage setup
SERIESSERIES
300300
DIGITALBIAMP ACTIVE SPEAKER
REVISION
OO
II
TECHNICAL FEATURES K300
System Active Bi-ampli
Amplifier type class D
RMS power 80W (BF) + 40W (HF)
Frequency response 70 -19000Hz
Crossover 1650 Hz 24dB/oct.
Sound pressure (SPL) 113 dB max
2x6,5” woofer - 1,5” voice coil Neodimio
1x1”driver - 1” voice coil Neodimio
Input sensitivity LINE/MIC -40dBu / 0dBu (switch)
Impedance LINE/MIC LINE/MIC
Balanced 30KW/1K2W
Unbalanced 15KW/600W
KW
Power supply
Weight 5,5Kg
Components
Input sensitivity RCA -10dBu
Impedance RCA 22
110-120Vac 50-60Hz
220-240Vac 50-60Hz
Dimension (LxHxP) 210x350x270mm
Contact dB Technologies for accessories to be used with speakers.
Will not accept any responsibilty when inappropriate accessories or not suitable additional
devices are used.
SAFETY INSTRUCTIONS FOR ACCESSORIES
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in
E3 (or lower E2, E1) Electromagnetic environments.

VOLUME
DRIVER 1”
SENS
-40dB / 0dB
BALANCED
INPUTS
LINK
L
N
MAINS FUSE
POWER
SWITCH
TRANSFORMER
WOOFER 6,5”
CD-AUX
INPUTS SENS
-10dB
WOOFER 6,5”
SCHEMA A BLOCCHI
BLOCK DIAGRAM
BLOCKSCHALTBILD
DIAGRAMA EM BLOQUES
10
9
PUSHPUSH
MAX
0
44
22
11
33
55
dd
BB
TECHNOLOGIESTECHNOLOGIES
VOLUME
LIMITER
READY
MIC -40dB
LINE -3dB
BALANCED
INPUTS
LINK
1
2
3
1 = GND
3 = COLD
2 = HOT
FUSE MAINS
LEFT RIGHT
STEREO CD - AUX
INPUTS
POWER
ON
LINE
MIC
2
1
3
SERIAL NUMBER
100-120V~ 50-60Hz
220-240V~ 50-60Hz
(FUSE T1A 250V~)
(FUSE T500mA 250V~)
MODULE POWER
CONSUMPTION
160W MAX
“CAUTION”
TO PREVENT ELECTRICAL SHOCK
DO NOT REMOVE COVER
“AVIS”
RISQUE DE CHOCH ELECTRIQUE
NE PAS OUVRIR
Internal voltage setup
SERIES
300300
DIGITAL BIAMP ACTIVE SPEAKER
REVISION
66
77
88
99
OO
II
READY
INTERNAL
POWER
SUPPLY
SIGNAL
Class D
®
DIGIPRO
DSP
Digital Signal Processing
Class D
120W
B
d
TE
I
G
O
L
O
N
H
C
ES
210mm
370mm
270mm
BB
dd
OEL HS I OE NG
TCOEL HS I OE NG
TC
DIMENSIONI
DIMENSION
ABMESSUNGEN
DIMENSIONS
MODULO AMPLIFICATORE
AMPLIFIER MODULE
VERSTÄRKERMODUL
MODULE AMPLIFICATEUR

UTILIZZI E INSTALLAZIONI
USES AND INSTALLATIONS
ANWENDUNGSBEREICHE UND INSTALLATIONEN
UTILISATIONS ET INSTALLATIONS
Utilizzo con supporto piantana
LO GI
O
TE E
C S
HNLO GI
O
TE E
C S
HN
B
B
d
d
Il kit di fissaggio con staffa è
opzionale (codice SN120)
B
d
B
d
B
d
B
d
B
d
B
d
Use with pedestal stand
Anwendung mit Pedestaluntergestell
Utilisation sur pied
The bracket fastening kit is
optional (code SN120)
Der Befestigungssatz mit Stange
ist optional (Artikelkode SN120)
Le kit de fixation par étrier est fourni
en option (code SN120)
Installazione fissa a parete
B
d
ECIEG
TO L O NSH
Fixed wall installation
Anwendung mit fixer Wandbefestigung
Installation murale fixe
Il kit di fissaggio con staffa è
opzionale (codice WB 03)
The bracket fastening kit is
optional (code WB 03)
Der Befestigungssatz mit Stange
ist optional (Artikelkode WB 03)
Le kit de fixation par étrier est fourni
en option (code WB 03)
Utilisation en appui
Anwendung mit Aufstützung
Supported use
Utilizzo in appoggio
MANIGLIA PER DIFFUSORE AK50 (OPZIONALE)
SPEAKER HANDLE AK50 (OPTIONAL)
HANDGRIFF AK50 (OPTIONAL)
POIGNÉE AK50 (OPTION)
Vite 2,9x13mm
2,9x13mm screw
Kit completo
Complete kit
Maniglia
Handle
Gancio per maniglia
Handle hook
Anello
Gambo
Punta = Positivo/Caldo/Fase +VE
Anello = Negativo/Freddo/Fase -VE
Punta Gambo
Punta = Segnale
Gambo=Schemo/Massa/Terra
Funzionamento sbilanciato con
connettore jack 1/4” (6,3mm)
1
2
3
Ingresso
XLR - maschio
Pin 3 =Negativo/Freddo/Fase -VE
1
2
3
Funzionamento sbilanciato con
connettore XLR
Ingresso
XLR - maschio
Pin 2 = Positivo/Caldo/Fase +VE
Pin 1 =Schermo/Terra/Massa
Pin 3 = Connesso al Pin 1
Funzionamento bilanciato con
connettore jack 1/4” (6,3mm)
Gambo=Schemo/Massa/Terra
Punta
Funzionamento bilanciato con
connettore XLR
Pin 2 = Positivo/Caldo/Fase +VE
Pin 1 =Schermo/Terra/Massa
Tip = Positive/Hot/+VE Phase
Balanced use of stereo 1/4” jack plug
Tip Sleeve
Tip = Signal
Sleeve=Screen/Ground/Earth
Unbalanced use of stereo 1/4” jack plug
Balanced use with XLR connectors
Input
XLR - male
Pin 2 = Positive/Hot/+VE Phase
Pin 3 =Negative/Cold/-VE Phase
Pin 1 =Screen/Ground/Earth
Unbalanced use with XLR connectors
Input
XLR - male
Pin 2 = Positive/Hot/+VE Phase
Pin 1 =Screen/Ground/Earth
Pin 3 = Link to Pin 1
Ring=Negative/Cold/-VE Phase
Sleeve=Screen/Ground/Earth
Sleeve
Ring
Tip
COLLEGAMENTI
CONNECTIONS
ANSCHL
BRANCHEMENTS
ÜSSE
11 12