dB Technologies IS115S Manual

IS115S 420120421Q REV1.1
QUICK START USER MANUAL SECTION 1
1[email protected]
The box contains:
N°1 IS 115S subwoofer
This quick start and warranty documentation
IS115S is the new dB Technologies versatile passi-
ve subwoofer for professional use. It is equipped
with one 15” ceramic woofer (4” voice coil) and
it’s just perfect as a complement for IS210L pas-
sive speaker. The mechanical design allows an
easy, accurate and quick installation for stacked
or flyable use thanks to the optional accessories.
DRK-1
flybar for
stacked/flyable use
DRK-2
ybar for
stacked/flyable use
LP-4
bracket for
stacked/flyable use
LP-6
bracket for
stacked/flyable use
•Impressive sound pressure
•Quick installation
•Stack or flyable use
PACKAGE CONTENTS
DESCRIPTION
ACCESSORIES
MAIN FEATURES
TECHNICAL SPECIFICATIONS
The warnings in this manual must be observed together with the “User Manual - Section 2”.
DIMENSIONS
Speaker Type Passive Subwoofer
Protection against solid
objects and liquids (IP): 55
Frequency Response [-6dB] 42 Hz - Xover
Usable Bandwith [-10dB] 38 Hz - Xover
RMS Power 800 W
Rated impedance 8 Ohm
Max SPL (1 m) 133 dB (Fullrange)
LF 1x 15”, 4” v.c.
Crossover Frequency Required external processing
Signal Input Terminal barrier strip (or speakON®
using the SP-IS accessory panel)
Signal Output Terminal barrier strip (or speakON®
using the SP-IS accessory panel)
Housing Wooden box - black finished
Rigging Points 8
Dimensions (WxHxD) 650x420x550 mm
(25.6x16.5x21.7 in)
Weight 27.8 Kg (61 lbs.)
W 650mm (25.6 in)
H 420mm (16.5 in)
D 550mm (21.7 in)
W
D
H
SP-IS
speakON® panel

IS115S 420120421Q REV1.1
QUICK START USER MANUAL SECTION 1
2[email protected]
CONNECTIONS
MECHANICAL FIXING POINT
IS 115S can be installed in different configurations. For
a quick installation, on both sides of the subwoofer
the user can find mechanical fixing points for stand
and flyable use (A).
PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING)
The speakers are protected against the ingress of solid objects and liquids with a rating of IP55 as defined by
IEC 60529. Please only use cables with the specified diameters:
PG9 => between 4 and 8mm diameter
Fasten properly the cable gland using the plastic tightening nut.
WARNING!
Failure to comply with these installation prescriptions could adversely affect the declared protection ratings.
CONFIGURATIONS STACKED
IS115S
LP-4 bracket
LP-6 bracket
IS210L
A
A
AUDIO
SOURCE
PARALLEL
SPEAKER
LINK
INPUT
iInstallation must be performed
complying with user’s manual
information and to related
instruction provided.
For further information regarding max loading and installation requirements, please refer to the accessories user manual.

IS115S 420120421Q REV1.1
QUICK START USER MANUAL SECTION 1
3[email protected]
FLOWN
DRK-1 ybar
LP-4 bracket
IS115S
LP-6 bracket
IS210L
DRK-2 ybar
LP-4 bracket
IS115S
IS210L
DRK-2 ybar
LP-4 bracket
IS115S
DRK-1 ybar
IS210L
For further information regarding max loading and installation requirements, please refer to the accessories user manual.

IS115S 420120421Q REV1.1
QUICK START USER MANUAL SECTION 1
4[email protected]
A.E.B. Industriale Srl
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA
BOLOGNA (ITALIA)
Tel. [phone]
Fax [phone]
www.dbtechnologies.com
[email protected]
Scan with your
QR Reader App
to download the
complete User
Manual.
QQRRCCooddeetteexxtthttps://www.dbtechnologies.com/qrcode/001101/
DDaatteeccrreeaatteedd13-07-2022 12:09 35
DDeessccrriippttiioonnproduct name: IS115S
IDnode: 8668
IDlanguage: 267
language: English
field: manual
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or pro-
perties. For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loud-
speaker check all the components for damages, deformations, missing or damaged parts that may compromise safety during installation.
If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions.
The external wiring connected to speaker output terminals requires installation by qualied personnel only. Once the equipment is instal-
led, prevent access to the connectors to unqualied personnel. Only use the accessories and congurations described in this manual, and
proceed in accordance with the instructions given in the manuals for the accessories. dBTechnologies will not accept any responsibility
for damages caused by inappropriate accessories or additional devices.
Installation and use of this equipment and its accessories must be performed only by “Expert personnel” according to safety standard. To
prevent hazards to people, animals and/or objects, make sure that the installation is stable and secure. Comply with the safety regulations
and laws in force in the country in which you use the product. For safe use, periodically check that all parts are in good working condition
before use. Only authorised personnel may carry out design, calculations, installation, testing and maintenance of professional own or
stacked audio systems.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should
never apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation,
installation, testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualied and au-
thorized personnel. AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
Features, specication and appearance of products are subject to change without notice.
dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to
change or improve products previously manufactured.
WARNINGS