DDC BU-65570T User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

Hardware Manual For 1 to 2 Channel
MIL-STD-1553 Tester/Simulator
CompactPCI Interface Card
MN-65572TX-001
(Covering BU-65570T & BU-65572T)
The information provided in this User‟s Guide is believed to be accurate; however,
no responsibility is assumed by Data Device Corporation for its use, and no license
or rights are granted by implication or otherwise in connection therewith.
Specifications are subject to change without notice.
105 Wilbur Place, Bohemia, New York 11716-2426
For Technical Support - 1-800-DDC-5757 ext. 7771
Headquarters - Tel: [phone], Fax: [phone]
United Kingdom - Tel: [phone], Fax: [phone]
France - Tel: [phone], Fax: [phone]
Germany - Tel: [phone], Fax: [phone]
Japan - Tel: [phone], Fax: [phone]
World Wide Web - http://www.ddc-web.com
All rights reserved. No part of this User‟s Guide may
be reproduced or transmitted in any form or by any
means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written
permission of Data Device Corporation.
REV E, August 2009
© 2001 Data Device Corp.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation ii BU-65572T Manual
RECORD OF CHANGE
Revision
Date
Pages
Description
A
10/2001
All
Original Issue
B
3/2002
vii, 25
Corrections
C
2/2003
Fig 1
Additions
D
8/2005
5
Table 2 Update
E
8/2009
2
Added inlet air minimum to the system
requirements. New manual format applied.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation iii BU-65572T Manual
TABLE OF CONTENTS
1PREFACE................................................................................................................VII
1.1 Text Usage..................................................................................................................vii
1.2 Special Handling and Cautions....................................................................................vii
1.3 Trademarks................................................................................................................ viii
1.4 Technical Support.......................................................................................................viii
2OVERVIEW ...............................................................................................................1
2.1 What is included in this manual? .................................................................................. 1
2.2 System Requirements .................................................................................................. 2
3HARDWARE INSTALLATION ..................................................................................3
3.1 Card Pinout .................................................................................................................. 3
3.2 Discrete I/O Connector “J1” .......................................................................................... 4
4DRIVER INSTALLATION..........................................................................................6
4.1 Windows 95/98............................................................................................................. 6
4.2 Windows NT 4.0......................................................................................................... 10
4.3 Windows 2000............................................................................................................ 14
4.4 Hardware Configuration.............................................................................................. 18
5DDC 1553 CARD MANAGER FOR 95/98/2000......................................................19
6DDC 1553 CARD MANAGER FOR WINDOWS NT................................................22
7HARDWARE OPERATION .....................................................................................25
7.1 General ...................................................................................................................... 25
7.2 Bus Controller Mode................................................................................................... 25
7.2.1 Minor and Major Frames................................................................................... 25
7.2.2 BC Error Injection.............................................................................................. 26
7.2.3 Inserting Asynchronous Messages ................................................................... 26
7.2.4 BC Intermessage Routines............................................................................... 27
7.2.5 Response Timeout............................................................................................ 27
7.3 RT Mode .................................................................................................................... 27
7.3.1 RT Error Injection.............................................................................................. 28
7.3.2 RT Intermessage Routines ............................................................................... 29
7.4 BC/RT Data Tables .................................................................................................... 29
7.5 Monitor Mode ............................................................................................................. 30
7.6 Interrupts.................................................................................................................... 30
7.6.1 BC Interrupt Generation.................................................................................... 31
7.6.2 RT Interrupt Generation.................................................................................... 31
7.6.3 Monitor Interrupts.............................................................................................. 32
7.7 Other Features ........................................................................................................... 32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation iv BU-65572T Manual
7.7.1 Variable Amplitude Transceiver ........................................................................ 32
7.7.2 IRIG-B Support................................................................................................. 32
7.7.3 IRIG-B Specifications........................................................................................ 33
7.7.4 Monitor DMA to Host Buffer .............................................................................. 34
7.7.5 Software Control of Bus Configuration.............................................................. 34
7.7.6 Discrete Outputs............................................................................................... 35
8APPENDIX A...........................................................................................................36
9APPENDIX B...........................................................................................................37
9.1 Acronyms ................................................................................................................... 37
10 INDEX….. ................................................................................................................38
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation vBU-65572T Manual
LIST OF FIGURES
Figure 1. 40-Pin “J1” Discrete I/O Connector.................................................................4
Figure 2. Found New Hardware .....................................................................................6
Figure 3. Search for Driver.............................................................................................7
Figure 4. Specify Driver Location ...................................................................................7
Figure 5. Found Driver ...................................................................................................8
Figure 6. Finished Install of Driver..................................................................................9
Figure 7. Confirm Driver Installation...............................................................................9
Figure 8. Welcome Screen...........................................................................................11
Figure 9. Software License Agreement........................................................................11
Figure 10. Destination Location....................................................................................12
Figure 11. Component Selection..................................................................................12
Figure 12. Program Folder Selection............................................................................13
Figure 13. Setup Complete ..........................................................................................13
Figure 14. Restart Computer........................................................................................14
Figure 15. Found New Hardware .................................................................................15
Figure 16. Search for Driver.........................................................................................15
Figure 17. Specify Driver Location ...............................................................................16
Figure 18. Found Driver ...............................................................................................17
Figure 19. Finished Install of Driver..............................................................................17
Figure 20. Control Panel ..............................................................................................19
Figure 21. DDC 1553 Card Manager............................................................................20
Figure 22. Card Manager Modify..................................................................................20
Figure 23. Control Panel ..............................................................................................22
Figure 24. DDC 1553 Card Manager............................................................................23
Figure 25. Device Driver Status ...................................................................................23
Figure 26. Modify Device..............................................................................................24
Figure 27. Sample IRIG Signal Timing.........................................................................33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation vi BU-65572T Manual
LIST OFTABLES
Table 1. J2: 1553 Bus 'D' Connector.............................................................................4
Table 2. J1: Discrete I/O................................................................................................5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation vii BU-65572T Manual
1 PREFACE
This manual uses typographical conventions to assist the reader in
understanding the content. This section will define the text formatting
used in the rest of the manual.
For the full text of this manual, BU-65572T will be used to identify both
the BU-65572T and the BU-65570T. In those cases where there is a
difference, the appropriate part number will be identified.
1.1 Text Usage
BOLD –text that is written in bold letters indicates important
information and table, figure, and chapter references.
BOLD ITALIC –will designate DDC Part Numbers.
Courier New –is used to indicate code examples.
<…> - Indicates user entered text or commands.
1.2 Special Handling and Cautions
The BU-65572T-300 uses state-of-the-art components, and proper care
should be used to ensure that the device will not be damaged by
Electrical Static Discharge (ESD), physical shock, or improper power
surges and that precautions are taken to avoid electrocution.
Turn off power to the PC and unplug from wall.
NEVER insert or remove card with power turned on.
Ensure that standard ESD precautions are followed. As a minimum, one
hand should be grounded to the power supply in order to equalize the
static potential.
Do not store disks in environments exposed to excessive heat, magnetic
fields or radiation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

P R E F A C E
Data Device Corporation viii BU-65572T Manual
1.3 Trademarks
All trademarks are the property of their respective owners.
1.4 Technical Support
In the event that problems arise beyond the scope of this manual, you
can get in touch with DDC by calling:
Customer support:
1-800-DDC-5757, ext. 7771
Headquarters:
1-631-567-5600, ext. 7771
Fax: [phone] to the attention of DATA BUS Applications.
Regional Offices:
USA & Canada:
East of the Mississippi River:
Tel: [phone] Fax: [phone]
West of the Mississippi River:
Tel: [phone] Fax: [phone]
Europe:
Tel: [phone] Fax: [phone]
Asia/Pacific:
Tel: [phone] Fax: [phone]
DDC also has an Internet World Wide Web site, which allows customers
to easily download new revisions of software and documentation. The
Internet address is www.ddc-web.com.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation 1BU-65572T Manual
2 OVERVIEW
The BU-65572T provides full, intelligent interfacing between one or two
MIL-STD-1553 Data Buses and a CompactPCI Bus. The BU-65572T is
packaged on a 3U, 32-Bit CompactPCI Form Factor printed circuit board
with a PCI bus interface. Features of the board include:
Plug-and-Play (PnP) compatible for easy installation
Onboard processor operating at 40Mhz
128 Kbytes of on-board Program RAM
128 Kbytes of shared static RAM per installed channel
DMA transfer of monitored data to host data buffer
IRIG-B time tagging combined with 32-bit onboard time tag counter
Software configuration of bus connection
Software configuration of bus loading
Variable output transceivers, 0 –20 volts nominal with 4096
incremental steps
Application software has the capability to simulate Bus Controller, all 31
Remote Terminals, and Monitor simultaneously on each of the installed
buses. There is additional capability to synchronize the onboard time
tags of all of the operating cards with one command. Included with each
BU-65572T CompactPCI Card is the DDC Menu and the Run Time
Library with example source. The library supports „C‟ and LabView
programming. All software and updates are posted on the DDC website.
2.1 What is included in this manual?
This manual contains a detailed installation guide for the BU-65572T
CompactPCI Card and a complete listing of the software supplied with
the card. The RTL Library, DLL, and Driver installations for Windows®95,
98, Windows NT®, and Windows 2000 will be covered in this manual.
The library software provides a level of abstraction such that it is not
necessary to understand the operation of the chip set.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

O V E R V I E W
Data Device Corporation 2BU-65572T Manual
2.2 System Requirements
A CompactPCI compatible Backplane with an 80386 or better host CPU.
Windows 95, 98, NT, or 2000 operating system.
One available CompactPCI Peripheral Slot in the Backplane.
cPCI slot must provide inlet air at 1 m/s minimum with a temperature
between 0°C to 55°C.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation 3BU-65572T Manual
3 HARDWARE INSTALLATION
The BU-65572T card is a CompactPCI Peripheral device and may be
inserted into any PICMG 2.0 R3.0 or higher, compatible slot. When
installing the card, the following should be observed:
NEVER insert or remove the card with the power turned on.
ALWAYS take proper precautions to guard against static damage. Use a
wrist strap if available, or ensure proper static grounding by touching the
power supply cover WITH POWER OFF.
Insert the card into the guide rails within the CompactPCI subrack and
then gently press the card into the Backplane connector. Secure with
proper hardware.
Make sure that adjacent cabling and wiring do not hinder the airflow
around the card.
The BU-65572T does not contain any configuration jumpers for selection
of bus connection. Selection of direct or transformer coupling is
performed by way of functions provided in the RTL. In addition to this,
there are no jumpers needed for card installation, as the BU-65572T is a
true Plug and Play design. Interrupts and memory selections will be
performed by the operating system as the boot system progresses.
3.1 Card Pinout
This section describes pinouts for the card. The card has two front panel
connectors, a DB-9 that is used for 1553 Bus I/O and a 40 pin Mini-D
connector that is used for TTL, power and IRIG signals. The pinouts for
these connectors are shown in following figures.
NOTE: All ground returns are connected to the chassis ground.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 4BU-65572T Manual
Table 1. J2: 1553 Bus 'D' Connector
Pin
Description
1
CH1_TXA_L
2
CH1_TXA
3
CH1_TXB
4
CH1_TXB_L
5
GND (connected to shell)
6
CH2_TXA_L
7
CH2_TXA
8
CH2_TXB
9
CH2_TXB_L
3.2 Discrete I/O Connector “J1”
Model BU-65570T includes a Front-Panel mounted Discrete I/O
connector “J1”. This connector (Soldered on the board) is a 40-Pin
“Subminiature D Type” (Amp P/N 787170-4). Pin numbering
designations for “J1” are as shown below.
(As viewed from BU-65570T Front-Panel)
Figure 1. 40-Pin “J1” Discrete I/O Connector
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 5BU-65572T Manual
Table 2. J1: Discrete I/O
Pin
Description
Pin
Description
1
Chassis Ground
21
Chassis Ground
2
IRIG-In
22
IRIG Mod
3
Chassis Ground
23
Chassis Ground
4
Channel 2 BC Trigger Out
24
Channel 2 Monitor Trigger In
5
Channel 2 BC Trigger In
25
Channel 2 Monitor Trigger Out
6
Chassis Ground
26
Chassis Ground
7
Channel 2 Discrete Out 5
27
Channel 2 Discrete Out 7
8
Channel 2 Discrete Out 6
28
Channel 2 Discrete Out 8
9
Chassis Ground
29
Chassis Ground
10
Chassis Ground
30
Chassis Ground
11
+5 Volts
31
+5 Volts
12
+5 Volts
32
+5 Volts
13
Chassis Ground
33
Chassis Ground
14
Chassis Ground
34
Chassis Ground
15
Channel 1 Discrete Out 1
35
Channel 1 Discrete Out 3
16
Channel 1 Discrete Out 2
36
Channel 1 Discrete Out 4
17
Chassis Ground
37
Chassis Ground
18
Channel 1 BC Trigger Out
38
Channel 1 Monitor Trigger In
19
Channel 1 BC Trigger In
39
Channel 1 Monitor Trigger Out
20
Chassis Ground
40
Chassis Ground
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Data Device Corporation 6BU-65572T Manual
4 DRIVER INSTALLATION
4.1 Windows 95/98
If you have Windows 95/98 continue with the following installation
instructions. If you are using another operating system, skip to the
relevant installation section.
1) Install the card as described in the beginning of the HARDWARE
INSTALLATION section.
2) Turn on the computer.
3) The Add New Hardware Wizard window will appear after boot-up:
Figure 2. Found New Hardware
4) Click on the Next button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 7BU-65572T Manual
Figure 3. Search for Driver
5) Click on Search for the best driver for your device.
6) Click on the Next button.
Figure 4. Specify Driver Location
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 8BU-65572T Manual
7) Insert the BUS-69068 Installation Disk.
8) Select the Floppy disk drives option.
9) Select the Specify a location option.
10) Type the path of the BUS-69068 Installation Disk; i.e. A:\
11) Click on the Next button to locate the BU-65572T-300 device
driver.
Figure 5. Found Driver
12) Click on the Next button to install the device driver.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 9BU-65572T Manual
Figure 6. Finished Install of Driver
13) Click on the Finish button to confirm the installation.
Figure 7. Confirm Driver Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 10 BU-65572T Manual
14) Click on the Finish button to close the Add New Hardware Wizard.
15) Continue configuring the device by installing the BUS-69068 RTL
software, which includes the DDC 1553 Card Manager.
16) Proceed with the DDC 1553 Card Manager instructions for
95/98/2000.
4.2 Windows NT 4.0
If you have Windows NT 4.0, continue with the following installation
instructions. If you are using another operating system, skip to the
relevant installation section.
NOTE: User must have administrator rights when using Windows NT.
1) Install the card as described in the previous HARDWARE
INSTALLATION section.
2) Turn on the computer.
3) Insert the BUS-69068 Installation Disk into the floppy drive.
4) Click on the Windows Start button.
5) Click on Run.
6) In the Open window type A:\Setup.exe.
7) Click OK.
8) Follow any instructions that may appear on the screen. The
computer will need to be rebooted for the device driver to run.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

D R I V E R I N S T A L L A T I O N
Data Device Corporation 11 BU-65572T Manual
Figure 8. Welcome Screen
9) The setup screen shows the software you are about to install. Click
the Next button to start the installation process.
Figure 9. Software License Agreement
10) Read the license agreement, and click the Yes button. If you do
not accept the license agreement, the Setup application will end.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com