ddrum BETA PRO User manual

ELECTRONIC DRUM SET
USERMANUAL
BETA PRO

Operation Warning
Warning & Caution Signs
WARNING
This sign indicates the risk of serious physical injury or
even death. Please operate the machine according to
instructions.
CAUTION
This sign indicates the risk of serious physical injury and
even death. Please operate the machine according to
instructions.
*Object damage refers to any harm or adverse effects to
household, furniture, pets, and etc.
About Signs
This sign indicates a warning or caution. Please read the accompanied
instruction to prevent any dangers.
This sign indicates any forbidden activity.
This sign indicates an instructional procedure for users to follow with.
ALWAYS FOLLOW THE INSTRUCTIONS
AS DESCRIBED BELOW
1

WARNING
Please read the following instructions
before operation.
Do not open or in any way modify the
machine or adapter.
Do not attempt to repair or replace any
internal parts by yourself, unless
instructed to do so by the manual. In
case of technical assistance, please
contact with your retailer, or their
customer service, or any recognized
retailers printed on the information page.
Do not store or operate the machine
under the following conditions:
• Near areas with extreme
temperature. (For example,in the car
under the sun, near a heat venting
pipe, and etc.)
• In very humid environments. (For
example, in the bathroom or near other
damp environments.)
• Exposing to rain or any other liquids
• In the sand.
• In shaking & unstable environments.
For proper operation, make sure that the
support stands are placed on flat and
stable ground in order to support the
machine safely.
WARNING
Please only use the adapter that is in-
cluded with the unit. Make sure that
the voltage of the socket matches the
voltage indicated on the unit.
Please do not over-twist or over-bend
the power cable, or place any objects
on it. Doing so may result in short-
circuit that can lead to fire and electric
shock.
Should any of the following situations
result, please stop operation and remove
the adapter from the socket, remove the
adapter from the socket, and consult with
your retailer, the nearest customer service,
or any of the recognized retailers listed on
the information page:
• The adapter or the power cable is
damaged.
• An object, or liquid has slipped into
the interior of the machine.
• The module has been exposed in
rain, or has got wet.
• The module is not operating or is
operating with noticeable problems.
2
Please do not operate with high volume
over a long period of time regardless of
using an amplifier or a headphone.
Doing so may prevent damage to your
hearing. Should any hearing discomfort
develop. Stop using and consult a hearing
doctor.

WARNING
If there are children in the household,
the adults should follow the safety
precautions explained in the manual.
Do not share the power supply with
too many adapters at the same time.
When using an extension power
supply, please make sure that the
total power usage does not exceed
the limit stated on the extension power
supply. Doing so may result in melting
of the cables and fire.
When using the module in other coun-
tries, please consult your retailer, the
nearest customer service, or any of
the recognized retailers listed on the
information page to find out correct
voltage for that country.
CAUTION
Always place the module and the
adaptor in areas with good airflow.
When inserting or removing the power
cable into/from the socket or the
machine, always grab the plug instead
of the cable.
If you do not plan to operate the
module for a long period of time,
please remove the adapter from the
socket.
To prevent the cables from tangling,
place the cables out of reach of
children.
Do not place heavy objects on the
module.
When moving the module, or during
insertion/removal of the plug, always
insertion/removal of the plug, always
use dry hands.
Please turn off the power and remove
the adapter from the socket before
cleaning the module.
When there is a risk of lightning strike,
please remove the adapter from the
socket.
3

Power Supply
• Do not share the power supply with other
electronics that can produce cable statics, for
example, electric motors.
• It is normal for direct current (DC) to produce
heat with extended usage, and there is no need
to be worried.
• Before connecting the module to other
electronics, always turn off the power to prevent
damage.
Placement/Location
• Operating the module near a post-amplifier or
machines that use High-power converters, buzzing
may result. To prevent this problem, please
change the module’s facing direction, or place the
machine away from the interrupting sources.
• This machine may interfere with the radios and
televisions. Please do not operate the module
near them.
• Do not place the module under sun, or near any
heat source, as high temperature may cause the
module or components to deform or discolor.
• To prevent permanent damage, please do not
expose the module or components to moist or in
humid environments.
Maintenance
• For normal cleaning, please use soft cloth with
little or no moist for wiping. For tougher spots, use
neutral-pH and wear-free cleaner then use dry soft
cloth to wipe clean.
• Never use volatile oil, diluting solutions, alcohol,
or any other kinds of solvents to prevent the
machine from deforming or discoloring.
Additional Precautions
• During operation, please handle with care to
prevent any damage. Do not hit or press against
the display screen.
• Always grab the heads of cables during in-
sertion/removal to prevent damage to the cables
or the machine.
• To prevent disturbing your neighbors, please
operate the machine at an acceptable volume, or
use a headphone, especially at night.
• Although this electronic drum set is designed to
minimize unwanted noise during operation, the
percussive sound may still pass through the floor
or walls, resulting in unexpected noise.Please be
careful not to let such sound disturb your neighbors,
especially at night.
• When transporting, please use the original or
similar packaging and box.
• Please use official cables for connection. When
using cables from other companies, please note
the following:Some cables may consist of resistors,
which may be incompatible and result in extremely
low volume. For information about the specifications
of cables, please consult with the manufacturer.
• Please do not hit the pads with excessive force to
prevent the risk of hurting your fingers.
Precautions
Please read the following precautions aside from the safety in-
structions
4

Connectors
Connectors
B1
B2 B3 B4 B5 C1 C2
C3
User
Manual
Cable Tie Drum Stick
(1 set)
Drum Key Headphones Ø1.27(cm) Pad
Connector
Ø3.81(cm)
U-shape Plate &
Double Screws
x2
×2 x1 x1 x1 x4 x1
Parts Spare Parts
P1 P2 P3 P4 P5 P4~P5
Floor Pad Ø3.81(cm)
Foot Pad
Ø3.81(cm)
Stopper
Wing Bolt Nut
x4 x2 x4 x27 x26 x2
Accessories
A1 A2 A3 A4 A5 A6
Sound Module Pad Cymbal Hi-hat
Controller
Kick Pedal Bass Drum&
Double Slip Resistant Tape
x1 x4 x3 x1 x1 x1
L1 L2
Adapter L-L Mono
Sound Cable
×1 x1
Adjustable Bar
x3
Ø3.81 - Ø2.22
Connector
Adjustable
C4
x1
WARNING
Please note: whenever you
insert or pull the plug out
of a socket or adapter, hold
the plug. Do not pull on the
cable.
B6
Vel cro
x6
P6
Ø2.22(cm)
Stopper
x2
5

S10 57cm X2
Support Stand
Ø3.81cm
S1 40cm X1
×2
S2 57cm X1
S3 40cm X1
×2
S4 75cm X1
x2
S5 57cm X1
x2
S6 75cm X1
×2
S7 40cm X1
x1
S8 57cm X1
x1 x1
S9 57cm X1
x1 x1 x1
S11 40cm X3
Ø1.27cm
Ø2.22cm
S12 20cm X4
S1
S7
S8
S9
S2 S2
S3
S4 S5 S6
x1
S2
6

Step 1
P4 x18
P5 X18
!
B4
x4
x1
x4
x1
Attention: When assembling this connector,
tighten each of the bolts in a square pattern.
Do not tighten one bolt at a time. This will
cause the connector to be uneven.
7

Step 2
S1 (40cm) x1 (left)
S2 (57cm) x1 (center)
S3 (40cm) x1 (right)
P1 x4
57cm
40cm
S1
S2
40cm S3
P1
P1
P1
P1
×
8

3
2
75cm
75cm
57cm
S4
S5
S6
!
!
!
Step 3
S4 (75cm) x1 (left)
S5 (57cm) x1 (center)
S6 (75cm) x1 (right)
Please note the direction of the screw.
9

×
S7 40cm
Step 4
S7 (40cm) x1
10

S8
57cm
57cm
P2
!
57cm
P2
!!!
S9 57cm
Step 5
S8 (57cm) x1
S9 (57cm) x1
S10 (57cm) x2
P2 x2
Please note the direction of the screw.
!
S10 S10
11

S11
S11
S11
Step 6
S11 Ø2.22 x40 (cm) x3
S12 Ø1.27 x20 (cm) x4
C3
x3
C4
x1
12

P3
P6
P3
P3
P3
Step 7
P3 x4
P6 x2
P6
13

Step 8
A2 x4 P4 x8
C1 x4 P5 x8
A2
P5 P4
C1A2
GrooveConvex
Match
the convex side of pad with the
groove side of connector .
14

A5
A4
Step 9
A4 x3
A5 x1
ZZ
Hi-hat and Hi-hat pedal
correspond to each other as open
close Hi-hat, simulating realistic
Hi-hat playing.
15

Step 10
P4 x1
A7 x1
A6 x1
Step 3
A6
Step 2
Step 1
P4
A5
The slip resistant tape compensate for varying kick pedal heights.
or
16

Mounting on the stand
A1 x1
C2 x1
Position the Sound Module onto
the Bar and fold the U-Shape
plate upwards around the bar.
Secure the U-Shape plate to the
back of the sound module with
screws.
C2
A1
17

④
Adjust the position and height
With the chair that you will be using, you should sit on the
chair and adjust the heights.
1. Adjust the position of ②Snare and ⑨
height of the waist.
2. Tilt the ③Tom 1 and ⑧Tom 2 for smoother playing.
3. To make it more realistic, tighten the nut to adjust the
①Hi-hat, loosen the nut to adjust ④Cymbal 1 ⑦Cymbal 2.
4. Adjust the position and height of the other pads.
5. Check that all screws have been tighten.
①Hi-hat
②Snare
③Tom 1
④
Crash
⑤
⑤
⑦Ride
⑧
Tom 2
Tom 3
Kick
tighten
loosenloosen
③Tom 1
Tom 2
②Snare
Tom 3 ①Hi-hat
tighten loosen
Cymbal 1
⑦Cymbal 2
①
②
③
⑤
⑦
④
⑥
HH-ctrl
⑧
⑥
⑥
18

Sound Cable
L2
WARNING
Please note: whenever you insert or pull the
plug out of a socket or adapter, hold the plug.
Do not pull on the cable.
STEP 1
STEP 2
Lock Lock
B6
Velcro
(no provide)
Controller
A4 x1
B6 X6
19