ddrum D-lite User manual

ELECTRONIC DRUM SET
USER MANUAL
D-lite

Operation Warning
Instruction for Prevention of Fire, Electric Shock, & Physical Injury
About Warning & Caution Signs
WARNING
This sign indicates the risk of serious physical injury or
even death. Please operate the machine according to
instructions.
CAUTION
This sign indicates the risk of serious physical injury
and even death. Please operate the machine according
to instructions.
to household, furniture, pets, and etc.
About Signs
This sign indicates a warning or caution. Please read the accompanied
instruction to prevent any dangers.
This sign indicates any forbidden activity.
This sign indicates an instructional procedure for users to follow with.
ALWAYS FOLLOW THE INSTRUCTIONS AS
DESCRIBED BELOW
1
Operation Warning
Instruction for Prevention of Fire, Electric Shock, & Physical Injury
About Warning & Caution Signs
WARNING
This sign indicates the risk of serious physical injury or
even death. Please operate the machine according to
instructions.
CAUTION
This sign indicates the risk of serious physical injury
and even death. Please operate the machine according
to instructions.
to household, furniture, pets, and etc.
About Signs
This sign indicates a warning or caution. Please read the accompanied
instruction to prevent any dangers.
This sign indicates any forbidden activity.
This sign indicates an instructional procedure for users to follow with.
ALWAYS FOLLOW THE INSTRUCTIONS AS
DESCRIBED BELOW

WARNING
Please read the following
instruction before operation.
Do not open or, in any way, modify
the machine or adapter.
Do not attempt to repair the
machine, or replace any internal
parts by yourself, unless instructed
to do so by the manual. In case
of technical need, please contact
with your retailer, or their customer
service, or any recognized retailers
printed on the information page.
Do not store or operate the machine
under the following described
conditions:
• Near areas with extreme
temperature. (For example, in
the car under the sun, near a heat
venting pipe, and etc.)
• In very humid environments.
(For example, in the bathroom, in
• Exposing to rain.
• In the sand.
• In shaking & unstable
environments.
Operate the machine with the
recommended support stands and
accessories only.
For proper operation, make sure
that the support stands are placed
to support the machine safely and
stably.
WARNING
Use only the included adapter. Make
sure that the voltage of the socket
matches the voltage indicated on
your adapter to prevent damage or
electric shock.
Please do not over-twist or over-
bend the power cable, or place any
objects on it. Doing so may result in
electric shock.
Please do not operate the machine
with high volume over a long period
of time regardless of using an
damage to your hearing. Should
any hearing discomfort results, stop
using the machine and consult a
hearing doctor.
Prevent letting any object like coins
or pins, or any liquid slip inside the
machine.
2
WARNING
Please read the following
instruction before operation.
Do not open or, in any way, modify
the machine or adapter.
Do not attempt to repair the
machine, or replace any internal
parts by yourself, unless instructed
to do so by the manual. In case
of technical need, please contact
with your retailer, or their customer
service, or any recognized retailers
printed on the information page.
Do not store or operate the machine
under the following described
conditions:
• Near areas with extreme
temperature. (For example, in
the car under the sun, near a heat
venting pipe, and etc.)
• In very humid environments.
(For example, in the bathroom, in
• Exposing to rain.
• In the sand.
• In shaking & unstable
environments.
Operate the machine with the
recommended support stands and
accessories only.
For proper operation, make sure
that the support stands are placed
to support the machine safely and
stably.
WARNING
Use only the included adapter. Make
sure that the voltage of the socket
matches the voltage indicated on
your adapter to prevent damage or
electric shock.
Please do not over-twist or over-
bend the power cable, or place any
objects on it. Doing so may result in
electric shock.
Please do not operate the machine
with high volume over a long period
of time regardless of using an
damage to your hearing. Should
any hearing discomfort results, stop
using the machine and consult a
hearing doctor.
Prevent letting any object like coins
or pins, or any liquid slip inside the
machine.

WARNING
Should any of the following
situations result, please stop
operation and remove the adapter
from the socket, and consult with
your retailer, the nearest customer
service, or any of the recognized
retailers listed on the information
page:
• The adapter or the power cable is
damaged.
• An object, or liquid has slipped
into the interior of the machine.
• The machine has been exposed
in rain, or has got wet.
• The machine is not operating
or is operating with noticeable
problems.
If there were children in the
household, the adults should
be responsible of ateaching the
children to follow the safety
precautions explained in the
manual.
Do not share the power supply with
.emit emas eht ta sretpada ynam oot
When using an extension power
supply, please make sure that the
total power usage does not exceed
the limit stated on the extension
power supply. Doing so may result
When using the machine in other
countries, please consult your
retailer, the nearest customer
service, or any of the recognized
retailers listed on the information
page.
CAUTION
Always place the machine and the
When inserting or removing the
power cable into/from the socket or
the machine, always grab the plug
instead of the cable.
If you plan not to operate the
machine for a long period of time,
please remove the adapter from the
socket.
To prevent the cables from tangling,
place the cables out of reach of
children.
Do not place heavy objects on the
machine.
When moving the machine, or
during insertion/removal of the
plug, always use dry hands.
remove the adapter from the socket
before cleaning the machine.
When there is a risk of lightning
strike, please remove the adapter
from the socket.
3
WARNING
Should any of the following
situations result, please stop
operation and remove the adapter
from the socket, and consult with
your retailer, the nearest customer
service, or any of the recognized
retailers listed on the information
page:
• The adapter or the power cable is
damaged.
• An object, or liquid has slipped
into the interior of the machine.
• The machine has been exposed
in rain, or has got wet.
• The machine is not operating
or is operating with noticeable
problems.
If there were children in the
household, the adults should
be responsible of ateaching the
children to follow the safety
precautions explained in the
manual.
Do not share the power supply with
.emit emas eht ta sretpada ynam oot
When using an extension power
supply, please make sure that the
total power usage does not exceed
the limit stated on the extension
power supply. Doing so may result
When using the machine in other
countries, please consult your
retailer, the nearest customer
service, or any of the recognized
retailers listed on the information
page.
CAUTION
Always place the machine and the
When inserting or removing the
power cable into/from the socket or
the machine, always grab the plug
instead of the cable.
If you plan not to operate the
machine for a long period of time,
please remove the adapter from the
socket.
To prevent the cables from tangling,
place the cables out of reach of
children.
Do not place heavy objects on the
machine.
When moving the machine, or
during insertion/removal of the
plug, always use dry hands.
When moving the machine, or
during insertion/removal of the
plug, always use dry hands.
remove the adapter from the socket
before cleaning the machine.
When there is a risk of lightning
strike, please remove the adapter
from the socket.

Power Supply
• Do not share the power supply with other
electronics that can produce cable statics,
for example, electric motors.
• It is normal for direct current (DC) to
produce heat with extended usage, and
there is no need to be worried.
• Before connecting the machine to other
prevent damage.
Placement/Location
• Operating the machine near a post-
converters, buzzing may result. To prevent
this problem, please change the machine’s
facing direction, or place the machine away
from the interrupting sources.
• This machine may interfere with the
radios and televisions. Please do not
operate the machines near them.
• Do not place the machine under sun, or
near any heat source, as high temperature
may cause the machine to deform or
discolor.
• To prevent permanent damage, please do
not expose the machine to moist or in humid
environments.
Maintenance
• For normal cleaning, please use soft
cloth with little or no moist for wiping. For
tougher spots, use neutral-pH and wear-free
cleaner then use dry soft cloth to wipe clean.
• Never use volatile oil, diluting solutions,
alcohol, or any other kinds of solvents to
prevent the machine from deforming or
discoloring.
Additional Precautions
• During operation, please handle with care
to prevent any damage.
• Do not hit or press against the display
screen.
• Always grab the heads of cables during
insertion/removal to prevent damage to the
cables or the machine.
• To prevent disturbing your neighbors,
please operate the machine at an acceptable
volume, or use a headphone, especially at
nights.
• Although the machine is designed to
minimize unwanted noise during operation,
the percussive sound may still pass through
noise. Please be careful not to let such
sound disturb your neighbors, especially at
nights.
• When transporting the machine, please
When using cables from other companies,
please note the following:
Some cables may consist of resistors,
which may be incompatible and result in
extremely low volume. For information
consult with the manufacturers.
• Please do not hit the pads with excessive
force to prevent the risk of hurting your
Precautions
Please read the following precautions aside from the safety instructions
4
Power Supply
• Do not share the power supply with other
electronics that can produce cable statics,
for example, electric motors.
• It is normal for direct current (DC) to
produce heat with extended usage, and
there is no need to be worried.
• Before connecting the machine to other
prevent damage.
Placement/Location
• Operating the machine near a post-
converters, buzzing may result. To prevent
this problem, please change the machine’s
facing direction, or place the machine away
from the interrupting sources.
• This machine may interfere with the
radios and televisions. Please do not
operate the machines near them.
• Do not place the machine under sun, or
near any heat source, as high temperature
may cause the machine to deform or
discolor.
• To prevent permanent damage, please do
not expose the machine to moist or in humid
environments.
Maintenance
• For normal cleaning, please use soft
cloth with little or no moist for wiping. For
tougher spots, use neutral-pH and wear-free
cleaner then use dry soft cloth to wipe clean.
• Never use volatile oil, diluting solutions,
alcohol, or any other kinds of solvents to
prevent the machine from deforming or
discoloring.
Additional Precautions
• During operation, please handle with care
to prevent any damage.
• Do not hit or press against the display
screen.
• Always grab the heads of cables during
insertion/removal to prevent damage to the
cables or the machine.
• To prevent disturbing your neighbors,
please operate the machine at an acceptable
volume, or use a headphone, especially at
nights.
• Although the machine is designed to
minimize unwanted noise during operation,
the percussive sound may still pass through
noise. Please be careful not to let such
sound disturb your neighbors, especially at
nights.
• When transporting the machine, please
When using cables from other companies,
please note the following:
Some cables may consist of resistors,
which may be incompatible and result in
extremely low volume. For information
consult with the manufacturers.
• Please do not hit the pads with excessive
force to prevent the risk of hurting your
Precautions
Please read the following precautions aside from the safety instructions
4

P1 P2 P3
Floor Pad Ø3.81 (cm)
Stopper Ø2.22 (cm) Stopper
P5
32+2
Wing-Bolt
32+2
Nut
x4 x2 x2
5
A1
Sound Module
MS310
x1
B1
Drum Stick
(1 set)
x1
L1
Adapter
x1
Accessories
A2
Pad
x5
B2
User
Manual
x1
L2
Sound
Cable
(Black)
x4
L-L Mono
L:100 cm
A3
Hi-Hat
Controller
x1
A4
Bass Drum
Controller
x1
B3
Cable Tie
x2
L3
L-L Mono
Sound
Cable
(Black)
x2
L:150 cm
L4
L-L Stereo
Sound
Cable
(Red)
x1
Parts
P4

Support Stand
40 cm ×1
x2
20 cm ×1
40 cm×1
x2
40 cm ×2
40 cm ×2
57 cm×1
40 cm×4
S1
S2
S3
S4
S5
S6
S7
S8 20 cm×1
Ø3.81cm
Ø3.81cm
Ø3.81cm
Ø3.81cm
Ø3.81cm
Ø1.27cm
Ø1.27cm
Ø2.22cm
Connectors
C1 C2 C3
Ø1.27 Pad
Connector
Ø3.81 - Ø2.22
Connector
C4
Ø1.27 - Ø2.22
Connector
C5 C6
Ø3.81 - Ø2.22
Connector
x5
x2
x2 x2 x3
Ø3.81 - Ø1.27
Connector
Adjustable
(Red)
(Red)
6
Ø3.81(cm)
U-shape Plate &
Double Screws
×1

68
Expansion
Connectors
7
C3C1
C2

123
89
8
C4 C5

P1
P1
P1
P1
20cm
S2
40cm
S1
40cm
S3
Step 1
S1 (40cm) x1 (left)
S2 (20cm) x1 (center)
S3 (40cm) x1 (right)
P1 x4
Ø3.81cm
Ø3.81cm
Ø3.81cm
9

Step 2
S4 (40cm) x2
S5 (40cm) x2
(57cm) x1
S6
Ø2.22cm
Ø3.81cm
Ø3.81cm (Red)
(Red)
10
!
Please note
the direction of the screw.
x2
x2
x3
S6
40cm
S5
40cm
S4

Step 3
(40cm) x3
11
S7 40cm
S7 40cm
C2
S7

Step 4
S7
S8
(40 cm) x1
(20 cm) (left)
(right)
x1
x2
P2
x2
P3
12
P2
P3
P2
S7 40cm
S8 20cm P3

Step 5
A2 x5
T1 x10
T2 x10
C2 x5
Depression
Convex
Below are examples of wrong assembly.
T1
T1
C2
T2
T2
A2
Use L2 (100cm black cable) connect
NOTE
13

Mounting on the stand
A1 x1
C6 x1
Position the Sound
Module onto the Bar and
fold the U-Shape Plate
upwards around the bar.
Secure the U-Shape Plate
to the back of the Sound
Module with Screws.
Remove the protective
A1
C6
14

(Black)
(Black)
(Black)
②
②
SNARE
③
③
TOM1
⑧
⑧
TOM2
⑦
⑦
CYMBAL 2
(Black)
⑤ ⑤ HI-HAT CTRL
⑥
⑥
BASS DRUM CTRL
Sound Cable
x4
L2
L3
x2
Connect the Sound
Cables to the Drum
Pads,Pedals and Sound
Module.
Mono cable (one black
line)
Stereo cable (two black
lines
L2
L3
(Red)
L4
(Red)
L3
x1
①
① HI-HAT
15
Hi-Hat
A3
Bass Drum
A4
Controller
A3 x1
A4 x1

④ CYMBAL1 and ⑦ CYMBAL2 must use Stereo Sound Cables
(red, 2 parallel black lines at the tip) for connection to the Sound Module.
NOTE
Conecting the Pads
⑧ TOM2
⑨
TOM3
⑩ BASS DRUM
⑦ CYMBAL2
⑦
⑨
⑧
⑩
DC IN
LINE IN
MIDI OUT
MENU
⑤ HI-HAT
CTRL
⑥ BASS DRUM
CTRL
① HI-HAT
② SNARE
③ TOM1
④ CYMBAL1
①
③
⑤
②
④
⑥
(Red)
(Black)
optional
headphone
Amplifier
optional
optional
16
ADAPTER (5V1A)
optional
To prevent damage to speakers, always turn down the volume before inserting
or removing sound cables.
NOTE
( 1 / 4 plug )
"
(RED)

17
Console Control Introduction
① DC IN
For connection of the power adapter.
② PHONES
For connection of a headphone.
③ POWER
④ VOLUME
For adjusting the system volume
NOTE
To prevent damage to speakers,
always turn down the volume before
inserting or removing sound cables.
⑤ LINE IN
For connection of a sound input
source like a portable music player,
a microphone, other instruments or
another sound source. The sound is
directed to both Phone and Line Out.
⑥ MIDI OUT
For connection of a sound input
source like a portable music player,
a microphone, other instruments or
another sound source. The sound is
directed to both Phone and Line Out.
About MIDI
MIDI (Musical Instrument Digitable
Interface) is an industry-standard
protocol that enables electronic
musical instruments, computers, and
other equipment to communicate,
control, and synchronize with each
other. MIDI allows computers,
synthesizers, MIDI controllers, sound
cards, samplers and drum machines
to control one another, and to
exchange system data.
②
③ POWER
①
⑤
MENU
⑥
④ VOLUME
Adapter must be 5V1A

Console Operation
Percussion Sound Module
Press these buttons to Select a Drum Style.
The Selected Drum Style will be displayed on
the left side of the Sound Module’s screen;
the picture of the Sound Module, above,
displays Selection of ROCK Style. When the
Sound Module is turned on, the setting will
default to ROCK Style.
Available Drum Styles: ROCK/ JAZZ/
METAL/ BLUES/ POWER/ TECHNO/
MARCH/ LATIN/ TAIKO/ TIMBALE/
FUSION
Drum Styles
Percussion Sound Module
& Metronome
18

NOTE .
Press this button to Select a Sound Set
for the current Drum Style. There are
up to 4 Sound Sets per Drum Style.
TECHNO, MARCH, and TAIKO Styles
only have 1 Sound Set. The Selected
Sound Set Number will be displayed to
the right of a hyphen on the right side
of the screen; the picture of the Sound
Module, above, displays Selection of
Sound Set 1. When the Sound Module
is turned on, the setting will default to
Sound Set 1.
Sound Set
Press this button to Toggle Reverb
On or Off. The function of Reverb is
to simulate the component of sound
surrounding walls or objects, like an
echo. An will be displayed
to the right of the Sound Set Number
to designate Reverb On. If the Sound
Module’s screen only displays a Drum
Style and a Sound Set, this designates
Reverb Off. When the Sound Module
is turned on, the setting will default to
Reverb Off.
Reverb
19