Definitive Technology SuperCube I User manual

Congratulations! You are about to enter the world of truly astonishing bass
with your new Definitive Technology SuperCube Subwoofer. Your new
SuperCube Sub is a compact, high-quality powered subwoofer intended for
use in your superior music or home theater system.
These revolutionary subwoofers utilize state-of-the-art components and non-
resonant, low diffraction Monocoque cabinet construction to achieve the
most realistic, accurate and thrilling low frequency response possible.
• Built-in super high-power, high-current amplifiers and
electronic crossovers.
•Completely self-contained amplifier and electronic crossover modules.
•Optimized amplifier and driver design engineered for optimum load
matching and power transfer characteristics.
•Electronic crossovers with precise equalization.
• Auto On/Off Circuits.
• Advanced protection circuits.
•Continuously variable phase controls.
• Precision volume controls.
• Gold-plated 5-way Binding Post Connectors.
Their tremendous flexibility allows for the easy,seamless integration of
SuperCubes into any two-channel or multichannel speaker system, delivering
true, accurate, extremely deep bass in any room. Toensure that you only
experience the finest performance possible from your new subwoofer, we
encourage you to take a moment (or a few) to read through this manual and
familiarize yourself with the recommended setup procedures for your new
SuperCube. Then, strap yourself in for the bass experience of a lifetime!
Get a FREE SuperCube button!
Email supercubesrule@definitivetech.com with your name and shipping address
and we’ll send you a button FREE! (Actual size: 2.5", white on red, metal pin back.)
SuperCube®Subwoofers
SuperCube I, II, III, Reference
and Trinity Signature Subwoofers
Owner’s Manual

2
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back
plate of this device. There are no user serviceable parts inside. Please refer all servicing to
licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert
the user to uninsulated “dangerous voltage” within the device’s enclosure. The international
symbol of an exclamation point inside a triangle is intended to alert the user to the presence
of important operating, maintenance and servicing information in the manual accompanying
the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain
or moisture.
1. Read Instructions—All safety and operating instructions should be read before operating the device.
2. Retain Instructions—The safety and operating instructions should be retained for future reference.
3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructions—All operating and safety instructions should be followed.
5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.
6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended
by the manufacturer.
8. Ventilation—The device should always be located in such a way that it maintains proper ventilation. It
should never be placed in a built-in installation or anywhere that may impede the flow of air through its
heat sink.
9. Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other
heat-generating devices.
10. Power Supply—The device should only be connected to a power supply of the type described in the
operating instructions or as marked on the device.
11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or
crushed by items placed on them or against them. Special attention should be paid to areas where the
plug enters a socket or fused strip and where the cord exits the device.
12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.
13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.
14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside
the device.
15. Damage Requiring Service—The device should be serviced by licensed technicians when:
•The plug or power supply cord has been damaged.
•Objects have fallen or liquid spilled inside of the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a marked change in performance.
•The device has been dropped or the cabinet becomes damaged.
16. Service—The device should always be serviced by licensed technicians. Only replacement parts
specified by the manufacturer should be used. The use of unauthorized substitutions may result in
fire, shock, or other hazards.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Your new SuperCube subwoofer contains a built-in amplifier and sophisticated
electronic crossover. There are several ways to install your subwoofer. One setup
is not considered “better” than another; rather, each is a function of what type of
entertainment system you own and how you plan to integrate your components.
Read the installation suggestions below to determine which options best suit
your needs. Please take care to perform all wiring procedures with your system
completely powered down.
Subwoofer Installation
Unpacking
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be
reported at once to your Definitive dealer or the delivery company that delivered
your loudspeaker. Please unpack your system carefully. Save all cartons and pack-
ing material in case you move or need to ship your system. Record the serial num-
ber found on the back of the subwoofer in the appropriate place on your warranty
card. Mail in your Warranty Card within 10 days of purchase.
3
Your Definitive Technology subwoofer has been designed to operate at frequencies
generally below 150 Hz. Because low-frequency information in this range essen-
tially is non-directional, your subwoofer can be located anywhere in your listening
room that is most convenient. Also, the continuously variable low pass filter oper-
ates at a very fast roll-off, ensuring great performance wherever you place your
subwoofer. There are, however, some general rules that you should bear in mind
when locating your subwoofer:
1. For maximum output, the subwoofer should be placed in a corner or against
the wall, leaving roughly 2- to 4-inch clearance between the subwoofer and
the wall(s).
2. Corner placement will increase the subwoofer’s efficiency, which in turn
will increase your system’s maximum output and improve the dynamic
capability of the subwoofer.
3. While one Definitive Technology subwoofer will always sound great, the
use of two subwoofers will definitely enhance your system’s performance
by providing a smoother and more consistent response pattern. Here, it is
recommended that you locate the subwoofers on the same side of the room
as the main speaker of the same channel.
4. Always remember that frequency response and output level are greatly
influenced by the subwoofer’s placement. A movement of even a foot or
two can dramatically change your system’s response characteristics. You
should experiment with placement in your particular listening room in
order to achieve the highest performance from your subwoofer.
Subwoofer Placement

4
Placement Inside a Cabinet or Cavity
The SuperCubes, because of their unique low-frequency radiation properties, can be
placed inside a cabinet or cavity with excellent results. Just be sure to leave at least
2inches of clearance on the sides and front of the subwoofer, and with the Trinity
Signature, 2 inches on the top, sides and rear if the subwoofer is placed on its back.
Low-Level Connections
Most often used is the LFE connection. Most receivers, preamps and decoders
feature a mono (line level) LFE/subwoofer output intended to be used with sub-
woofers. You can feed the mono or LFE subwoofer output of your receiver or
decoder to the LFE input on the subwoofer and achieve full performance. [See
Diagram 1.] Usually, these outputs have their own low-pass filter built into the
circuit, and if this is the case, you would normally input them into the LFE input.
The LFE inputs on your SuperCube subwoofer are direct coupled inputs which are
not affected by the subwoofer’s low-pass filter or low-pass crossover control. If the
sub or LFE output on your receiver or decoder does not have a low-pass crossover
LEFT
This is the usual hookup with Dolby Digital®
RIGHT
Diagram 1
Wiring Diagrams

5
or you wish to use the SuperCube subwoofer’s low-pass crossover and control in
addition to the low-pass crossover in your decoder, simply plug the sub or LFE
output of your decoder into the left or right low-level input of your SuperCube
subwoofer. However, in almost all cases, a dedicated LFE output already has its
program material tailored for input into an unfiltered LFE input and as such
should be fed into the LFE input on your SuperCube.
Alternately, another way to hook up your Definitive Technology SuperCube
subwoofer is via the low-level input connectors which are gold-plated RCA-type
jacks designed to accept standard audio interconnect cables. For preamps and
decoders, run an interconnect from the left and right outputs of the preamp or
decoder to the left and right low-level inputs on the subwoofer. If you have two
sets of outputs, you can use one set of these; if not, you can put a Y-connector into
each output (left and right) and run half of each Y back into a (left and right) main
input on the preamp decoder, receiver or power amp and the other half into the
(left and right) low-level input on the subwoofer.
High-Level Speaker Wire Connections
Your Definitive Technology SuperCube subwoofer can also be hooked up via
high level connections. In this situation, you have the option of running your main
speakers “full range” or rolling off the low end by using the high-pass filter built
into the subwoofer. For high-level wiring, your interconnects are simply equal
distance lengths of high quality speaker cable.
To hook up your SuperCube subwoofer via the high-level connections, simply run
speaker cable from the right channel high-level connector on the subwoofer to the
right channel speaker connector of your receiver or amplifier. Repeat this process
for the left channel. Please take care that the red (+) terminal on the subwoofer is
connected to the red (+) terminal on your receiver or amplifier,and that the black
(-) terminal on your receiver or amplifier is connected to the black (-) terminal on
the subwoofer. This will ensure absolute phase throughout your system.
Your main speakers can now be connected in one of two ways. If you wish to
utilize the high-pass filter built into your subwoofer,simply connect your main
speakers to the high-level out terminals on the subwoofer. [See Diagram 2.]
Again, take care to make red to red (+) and black to black (-) terminal connec-
tions. This connection will provide a smoothly contoured roll-off of the low fre-
quencies going to your main speakers starting at 80 Hz. For more overall bass out-
put when using full-range main speakers, run the main speakers full range by
hooking them up directly to the amp. In many systems, if your speakers are true
full-range systems, you may find that you get a more satisfying sound by running
the speakers full range and crossing your subwoofer in fairly low (40 – 70 Hz).
On the other hand, if you find that you are overdriving your main speakers, you
will be able to play your system louder by using the built-in high pass crossover
for your main speakers.
The Advantages of Multiple Subwoofers
Definitive’s SuperCube subwoofers are engineered to be used singly or in
stereo pairs. With a single subwoofer,both left and right signals are sent to the

LEFT RIGHT
AMPLIFIER OR RECEIVER
RL
NOTE: If you wish to run your main speakers full range with no low frequency
roll-off, hook them directly to the main speaker output terminals or your receiver
or amplifier as in any normal hi-fi system.
subwoofer wherein they are combined via the electronic crossover into one
composite signal. With stereo subwoofers, the left and right low frequency signals
are reproduced by their own individual subwoofers. The use of one subwoofer
achieves outstanding performance; however, the addition of a second subwoofer
(one for the left and one for the right channel) clearly offers the highest level of
performance achievable for both movies and music. The use of stereo subwoofers
smooths out the peaks and dips which result from the eigenmodes in your room.
Two subwoofers couple much better to the air in your room (four times better)
and of course offer double the power. In addition, some state-of-the-artDolby
Digital* home theater installations have begun to use a separate subwoofer
hooked up to the rear (surround) channels and we recommend this for the
absolute ultimate in performance.
Dual Subwoofer Connections
When hooking up a stereo pair of subwoofers, wiring is quite similar to traditional
high-level connections. Here, instead of running both speaker cables from your
receiver or amplifier to the left and right high-level terminals on the subwoofer,
you will run the left channel to the left channel subwoofer and the right channel to
6
Diagram 2
* Dolby Pro-Logic, AC-3 and Dolby Digital are Registered Trademarks of Dolby Laboratories Licensing Corporation.

7
the right channel subwoofer. Again, take care to make red to red (+) and black to
black (-) terminal connections.
Don’t worry that on your left subwoofer the right channel terminals will be empty
and that on the right channel subwoofer the left channel terminals will be empty—
both channels are combined at the subwoofer’s input stage. There is a possibility
that with this type of wiring you may need to increase your gain a little bit for
proper balance.
Astereo subwoofer system using low-level connections is equally simple. From
your receiver or preamp, run an RCA-type interconnect from the left channel main
output to the left channel low-level input on the subwoofer you are using for the
left channel. The process should then be repeated for the right channel. In this
setup, main speaker connections are made between your receiver or amplifier in a
traditional manner. If you are using dual subwoofers with a Dolby Digital System,
we suggest that each subwoofer receives its appropriate left or right channel signal,
plus an LFE signal (with the LFE plugged into the LFE input). You would then set
the Dolby Digital processor’s bass management system to “Large” left and right
main speakers and sub to “Yes.”
Your Definitive Technology SuperCube subwoofer is equipped with a full
complement of operating controls to ensure complete flexibility and maximum
performance in any installation. Most of them basically are the “set and forget”
type, although occasionally certain controls will require minor adjustments.
Gain Control
On the back panel of your subwoofer is a gain (volume) control. This control is
used to raise or lower the output level of your subwoofer in relation to the other
speakers in your system.
Low Pass Filter
Your subwoofer’s back panel features a continuously variable low pass filter.
This filter is continuously variable between 40 and 150 Hz. It rolls off the high-
frequency response of your subwoofer.This low pass filter control is used to obtain
the optimum transition between the subwoofer and your main speakers. We receive
many questions from subwoofer owners asking us where to set the filter controls in
avariety of different setups. Although many people think that there is a specific
frequency at which to set the controls in their system, this can only be determined
by you. Experimentation is recommended (due to system placement and subjective
variables) to obtain the best sound for you.
High Pass Filter
Your subwoofer is equipped with a continuously variable high pass filter which is
used when you wire the low-level inputs of your subwoofer to a full-range signal
Operating Controls

8
and the low-level outputs of your subwoofer to the left and right channel inputs of
your amplifier. [See Diagram 3.] When hooked up thusly, it allows you to vary the
low-frequency roll-off of your main speakers. This control only works using the
low-level inputs and outputs.
Phase Control
On the back of your subwoofer you will find a continuously variable phase control,
with a range of 0–180 degrees. This control is used to perfectly blend the output
of your subwoofer with your main speaker and to compensate for any possible
problems due to placement constraints. The control should be set to “0” when
setting up your subwoofer. The effect of this control is somewhat subtle and many
people have difficulty setting it correctly. If in doubt, leave it set at “0.” Again,
experimentation with this control is recommended due to system and placement
variables; there is no “best place” to set it other than where it sounds best to you.
RIGHT
LEFT
Diagram 3
Installing Feet On the Back of the Trinity
Signaturefor On-Back Positioning
In order to make the Trinity Signature more flexible for custom installations, we
have included optional feet which can be installed on the back of the subwoofer in
order to provide clearance for the controls if the sub is positioned on its back.

9
Powering Up the Active Subwoofer Section
Your SuperCube subwoofer contains a built-in, active powered subwoofer section
as well as an electronic crossover. Each SuperCube subwoofer must be plugged
into an electrical socket (use an unswitched outlet if possible) of the appropriate
voltage (as indicated on the back of your unit) using the plug on the end of the
black cord attached to the electronics module on the back of the loudspeaker. The
SuperCube subwoofer has a special circuit which automatically turns the powered
subwoofer section on when a signal is fed to the loudspeaker and does not require
an on/off switch. Please note that if you hear a pop from the speaker when the amp
powers up or powers down, this is normal. The red LED on the back panel will
light up when a signal is sensed and the amplifier turns on. Please note that after
the cessation of a signal, it may take up to an hour for the amplifier to actually turn
off. In some installations where radio frequency (RF) remotes are present in the
area the red light may remain on. This is nothing to be worried about as the amp
will be in low idle mode which uses virtually no power.
To prevent accidental damage to your subwoofer from overdriving the
system, the subwoofer features an internal overload protection circuit,
which will turn the subwoofer off or down when overdriven or over-
heated and will then resume normal operation after a few minutes.
Very Important: Setting Channel Balance
and Bass Management Systems
Dolby Digital and DTS 5.1 (6.1, 7.1) systems and decoders have a critical
channel balancing procedure for the left and right front speakers, center channel,
rears and subwoofer (if it is hooked up through the “LFE or Sub Out” low-level
connection) which must be followed if the system is to perform properly. We
have spoken with many system users with problems relating to the overall sound
of their system which could be clearly traced back to improper system balance.
In fact, many users never realize that there is a system balance procedure to
be followed.
Also note that Dolby Digital and DTS 5.1 (6.1, 7.1) systems and decoders have
bass management systems (systems which direct the bass to the various channels)
which vary from unit to unit. This bass management system must also be properly
adjusted. We have spoken with many system users with problems relating to the
overall sound of their system which could be clearly traced back to improper
bass management. In fact, many users never realize that there is a bass manage-
ment procedureto be followed.
There are predrilled holes under the grill cloth on the back of the sub. Two holes
are 2 inches from the top and 11/4inches from the sides and two holes are 21/4
from the bottom and 11/4from the sides. Simply locate the holes and gently tap in
the four brass inserts that come with the sub and screw in the feet.

If you experience any difficulties with your subwoofer, try the suggestions
described below. If you are still having problems, please consult your Definitive
Technology Authorized Dealer for assistance.
1. Make sure all your system interconnects and power cords are solidly in
their place.
2. Should you experience any level of ground hum or noise, try plugging the
subwoofer into the same circuit as your amplifier. Please note that some
cable TV hookups induce hum into the whole system and require a special
isolation device. Please consult your dealer.
3. The system is provided with sophisticated internal protection circuitry.
If for some reason the protection circuitry is tripped, please turn down your
system’s volume and wait five minutes before trying the system again. If the
amplifier should overheat, the system will turn itself off until the amplifier
cools and resets.
4. Check to be sure that your power cord has not been damaged.
5. Check that no foreign objects or liquid have entered the cabinet.
6. Check the fuse on the back panel of the subwoofer.If the fuse is blown
replace it with an 8-amp 250-volt slow-blow fuse for the 110-volt version
and a 4-amp 250-volt slow-blow fuse for the 240-volt version.
7. If you cannot get your subwoofer to turn on or if no sound comes out and
you’re sure the system is set up properly,please bring the subwoofer to
your Definitive Technology Authorized Dealer for assistance.
Troubleshooting
10
It is our pleasure to offer assistance if you have any questions regarding your
subwoofer or its set-up. Please contact your nearest Definitive Technology dealer
or contact us directly at 410-363-7148 or www.definitivetech.com.
Technical Assistance
Service
Service and warranty work on your Definitive loudspeakers will normally be per-
formed by your local Definitive Technology dealer. If, however, you wish to return
the speaker to us, please contact us first, describing the problem and requesting
authorization as well as the location of the nearest factory service center. Please
note that the address given in this booklet is the address of our offices only.
Under no circumstances should loudspeakers be shipped to our offices or
returned without contacting us first and obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117
Phone: [phone]

Specifications
SuperCube®Trinity Signature
Dimensions 18"W x 18"D x 313/4"H
Frequency Response 10 Hz – 200 Hz
Driver Complement Two 14" long-throw SuperCube Technology subwoofers coupled to
four 14" infrasonic radiators
Amplifier 2000 Watts Digitally-Coupled Class D amplifier
Low-Level High-Pass Filter 12 dB/octave continuously variable (40 – 150 Hz)
Speaker Level High-Pass Filter 6dB/octave (80 Hz)
Low-Level Low-Pass Filter 24 dB/octave continuously variable (40 – 150 Hz) plus unfiltered LFE direct coupled input
Phase Control 0 – 180 degrees continuously variable
Fuse Size 8-amp 250-volt slow-blow fuse, Bussman MDL or Littelfuse 313 type for the
110-volt version and 4-amp 250-volt slow-blow fuse for the 240-volt version
SuperCube®Reference
Dimensions 163/4"W x 163/4"D x 167/8"H
Frequency Response 11 Hz – 200 Hz
Driver Complement One 14" long-throw SuperCube Technology subwoofer coupled to
two 14" infrasonic radiators
Amplifier 1800 Watts Digitally-Coupled Class D amplifier
Low-Level High-Pass Filter 12 dB/octave continuously variable (40 – 150 Hz)
Speaker Level High-Pass Filter 6dB/octave (80 Hz)
Low-Level Low-Pass Filter 24 dB/octave continuously variable (40 – 150 Hz) plus unfiltered LFE direct coupled input
Phase Control 0 – 180 degrees continuously variable
Fuse Size 8-amp 250-volt slow-blow fuse, Bussman MDL or Littelfuse 313 type for the
110-volt version and 4-amp 250-volt slow-blow fuse for the 240-volt version
SuperCube®I
Dimensions 141/4"W x 141/4"D x 141/8"H
Frequency Response 13 Hz – 200 Hz
Driver Complement One 10" long-throw SuperCube Technology subwoofer coupled to two 10" infrasonic radiators
Amplifier 1500 Watts Digitally-Coupled Class D amplifier
Low-Level High-Pass Filter 12 dB/octave continuously variable (40 – 150 Hz)
Speaker Level High-Pass Filter 6dB/octave (80 Hz)
Low-Level Low-Pass Filter 24 dB/octave continuously variable (40 – 150 Hz) plus unfiltered LFE direct coupled input
Phase Control 0 – 180 degrees continuously variable
Fuse Size 8-amp 250-volt slow-blow fuse, Bussman MDL or Littelfuse 313 type for the
110-volt version and 4-amp 250-volt slow-blow fuse for the 240-volt version
SuperCube®II
Dimensions 12"W x 12"D x 121/4"H
Frequency Response 14 Hz – 200 Hz
Driver Complement One 8" long-throw SuperCube Technology subwoofer coupled to two 8" infrasonic radiators
Amplifier 1250 Watts Digitally-Coupled Class D amplifier
Low-Level High-Pass Filter 12 dB/octave continuously variable (40 – 150 Hz)
Speaker Level High-Pass Filter 6dB/octave (80 Hz)
Low-Level Low-Pass Filter 24 dB/octave continuously variable (40 – 150 Hz) plus unfiltered LFE direct coupled input
Phase Control 0 – 180 degrees continuously variable
Fuse Size 8-amp 250-volt slow-blow fuse, Bussman MDL or Littelfuse 313 type for the
110-volt version and 4-amp 250-volt slow-blow fuse for the 240-volt version
SuperCube®III
Dimensions 101/4"W x 101/4"D x 101/4"H
Frequency Response 16 Hz – 200 Hz
Driver Complement One 71/2" long-throw SuperCube Technology subwoofer coupled to
two 71/2"infrasonic radiators
Amplifier 650 Watts Digitally-Coupled Class D amplifier
Speaker Level High-Pass Filter 6dB/octave (80 Hz)
Low-Level Low-Pass Filter 24 dB/octave continuously variable (40 – 150 Hz) plus unfiltered LFE direct coupled input
Phase Control 0 – 180 degrees continuously variable
Fuse Size 8-amp 250-volt slow-blow fuse, Bussman MDL or Littelfuse 313 type for the
110-volt version and 4-amp 250-volt slow-blow fuse for the 240-volt version
11
Visit us at www.definitivetech.com

This product complies with the essential requirements of
EMC directives 89/336/EEC and 73/23/EEC (inclusive of
93/68/EEC) and carries the CE mark accordingly.
DFAT 012909
Definitive Technology warrants to the original retail purchaser only that this Definitive
Technology Loudspeaker Product (the “Product”) will be free from defects in materials and
workmanship for a period of five (5) years covering the drivers and cabinets, and three (3) years
for the electronic components from the date of the original purchase from a Definitive
Technology Authorized Dealer. However, this warranty will automatically terminate prior to
the expiration of five (5) years for the drivers and cabinets and three (3) years for the electronic
components if the original retail purchaser sells or otherwise transfers the Product to any other
party. The original retail purchaser shall hereinafter be referred to as “you.” Defective Products
must be shipped, together with proof of date of purchase, prepaid insured to the Authorized
Dealer from whom you purchased the Product, or to the nearest factory service center.
Product(s) must be shipped in the original shipping container or its equivalent; in any case the
risk of loss or damage in transit is to be borne by you. If, upon examination at the Factory or a
Definitive Technology Authorized Dealer, it is determined that the unit was defective in
materials or workmanship at any time during this Warranty period, Definitive Technology or
the Definitive Technology Authorized Dealer will, at its option, repair or replace this Product at
no additional charge, except as set forth below. All replaced parts and Product(s) become the
property of Definitive Technology. Product(s) replaced or repaired under this Warranty will be
returned to you, within a reasonable time, freight collect.
This Warranty does not include service or parts to repair damage caused by accident, mis-
use, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage in
excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly
attributable to defects in materials or workmanship, or service, or repair or modification of the
Product which has not been authorized by Definitive Technology. Definitive Technology makes
no Warranty with respect to its Products purchased from dealers or outlets other than
Definitive Technology Authorized Dealers. This Warranty is in lieu of all other expressed
Warranties. If this Product is defective in material or workmanship as warranted above, your
sole remedy shall be repair or replacement as provided above. In no event will Definitive
Technology be liable to you for any incidental or consequential damages arising out of the use
or inability to use the Product, even if Definitive Technology or a Definitive Technology
Authorized Dealer has been advised of the possibility of such damages, or for any claim by any
other party. Some states do not allow the exclusion or limitation of consequential damages, so
the above limitation may not apply to you.
All implied warranties on the Product are limited to the duration of this expressed
Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the
above limitations may not apply to you. This Warranty gives you specific legal rights, and you
also may have other rights which vary from state to state.
Limited Warranty:
5-Years for Drivers and Cabinets,
3-Years for Electronic Components