Delkin Devices eFilm Reader-19 User manual

© Copyright Delkin Devices, Inc., All rights reserved. No part of this publication
may be reproduced in any form, or by any means without prior written permission
of Delkin Devices, Inc.
Printed in USA MNCA0041 • Rev 1.0
Delkin Part No. DDREADER-19
Delkin Devices, and eFilm are registered trademarks of Delkin Devices, Inc. All other brand names, trademarks
and part numbers are the property of their respective owners. They are used for identification purposes only, andin no
way imply ownership by Delkin Devices.
eFilm RFilm R
Film RFilm R
Film Readereader
eadereader
eader-19-19
-19-19
-19
CompactFCompactF
CompactFCompactF
CompactFlashlash
lashlash
lash TT
TT
Type I/II,ype I/II,
ype I/II,ype I/II,
ype I/II,
SmarSmar
SmarSmar
SmartMedia,tMedia,
tMedia,tMedia,
tMedia, SecurSecur
SecurSecur
Secure Digital,e Digital,
e Digital,e Digital,
e Digital,
MultiMediaCarMultiMediaCar
MultiMediaCarMultiMediaCar
MultiMediaCard,d,
d,d,
d, MemorMemor
MemorMemor
Memory Sticy Stic
y Sticy Stic
y Stickk
kk
k
InterInter
InterInter
Internal USB Rnal USB R
nal USB Rnal USB R
nal USB Reader/Weader/W
eader/Weader/W
eader/Writerriter
riterriter
riter
User’User’
User’User’
User’s Mans Man
s Mans Man
s Manualual
ualual
ual
For Windows XP / 2000 / ME / 98 / 98 SE
To prevent damage to the module or user, follow these basic handling guidelines
•Do not drop, bend or dismantle the module.
•Keep cool and dry. Avoid exposure to heat or liquids.
•Avoid dust, excessive vibrations and volatile substances.
•Keep away from electromagnetic sources, such as magnets,
monitors, speakers and transformers.

Table of Contents
Introduction 1
Included Components 1
Driver Software Installation for Windows 1
Hardware Installation 2
Inserting a Card 3
Basic Operation 4
Removing a Card 5
Formatting a Card 5
Operational Notes 5
Network - Windows Drive Letter Assignment 6
Windows Troublshooting 7
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○
The eFilm Reader-19 will accept
CompactFlash Cards of Type I (3.3mm)
and Type II (5.0mm) including IBM
Microdrives, SmartMedia(3V), Secure
Digital/MultiMediaCards & Memory Stick.
It’s ‘hot swappable’ - You can insert and
remove cards without the need to shut
down the computer.
J9: Connect to
USB Header on
motherboard of
computer

Introduction
Thank you and congratulations on your purchase of the eFilm Reader-19 internal USB
reader/writer. Before you begin use of this product, please take some time to read all
instructions and warranty information.
The Reader-19 is designed to read and write to Compact Flash Cards Type I and II,
including the IBM Microdrive, SmartMedia, Secure Digital, MultiMediaCard and Memory
Stick. It is a convenient bridge between your PC and removable media applications. All
media cards are accessed as removable drives. The Reader will appear as four sepa-
rate drive icons in My Computer, one for each slot.
Please look to our website at http://www.delkin.com for FAQs and current information on
compatibility issues as well as the latest drivers.
Included Components
eFilm Reader-19  Ribbon Cable  Driver CD  Manual
System Requirements
IBM compatible desktop PC
• Windows XP / 2000 / ME / 98 / 98 SE
• Internal 10-pin USB header
• One available 3.5” drive bay
Special Handling Instructions
• NEVER attempt to install or remove internal components with the power on.
• Keep the Reader-19 in its static-resistant envelope until the time of installation.
• Hold the reader by external edges. Avoid touching components, connectors or pins.
Delkin Devices User’s Manual Page 1
Driver Software Installation for Windows®
Windows® XP / Windows ME
Driver installation is not necessary for the Windows XP and Windows Millenium (ME)
operating systems. When the Reader-19 is connected to the USB port, the computer will
detect the new hardware and install the required drivers automatically. The Reader-19
uses the MSD (Mass Storage Device) specification, which these operating systems
support by default. The software driver can be installed on all operating systems to
provide an identifying icon for each media type.
Windows® 2000 / 98 / 98 SE
Before connecting the device, you must install the device driver located on the accompa-
nying CD-ROM. To avoid compatibility issues, install only the Reader-19 driver. On
Windows 2000 systems, it is recommended that you install the latest service pack,
available for download at the Microsoft website.
1. Start Windows and insert the Delkin Devices driver CD-ROM. Close any other
applications during installation.
DDREADER-19 USB CF / SM / SD / MMC / MS Reader/Writer

6. On the motherboard, locate the 10-Pin USB header.
The location of this header will vary between different
motherboard brands. Connect Pin 1 of the ribbon
cable to Pin 1 of the USB header. Please verify pin-
out before turning on your system.
Figure 2
Figure 1
7. Turn the system on and watch the reader carefully, ensuring that the LEDs light up.
Note: The header marked J10 is an optional auxilliary port to which an additional USB
socket can be hooked up.
Figure 3
3.5” bay
2. Click eFilm Reader-19 from the list of
products on the left to open the installation
window for the Reader-19. (See Figure 1)
3. Click the Install button and follow the on-
screen instructions. For best results, allow
the drivers to be installed into the default
locations.
4. When prompted, reboot the computer to
complete installation.
Hardware Installation
Installing the eFilm Reader-19 will require opening your PC and configuring your
hardware. Refer to your computer’s manual for disassembly/assembly instructions.
1. Shut your system down and turn off the power.
2. Disconnect the power cord and remove the cover from your computer. Touch a bare
-metal part of your computer to discharge static electricity.
3. Remove the faceplate of an available 3.5” drive bay.
4. Slide the Reader-19 into the bay and secure it with screws. (See Figure 2)
5. On the reader, locate pin 1 on the 10-pin header marked J9 and connect Pin 1 of the
ribbon cable to it. The wire colored red or textured differently from the others will
identify Pin 1 of the ribbon cable. (See Figures 3)
USB CF / SM / SD / MMC / MS Reader/Writer DDREADER-19
Page 2 Delkin Devices User’s Manual

Inserting a Card
All slots can be used simultaneously to transfer files from card to computer or card to
card. To avoid damaging the card or the reader, do not use force when inserting the card.
Delkin Devices User’s Manual Page 3
• To insert a Secure Digital or
MultiMediaCard, position the card
with the gold connector side down
and the notched end toward the
reader. Insert the card gently but
firmly into the slot labeled MMC &
SD.
• To insert a CompactFlash Type I,
Type II or Microdrive, position the
card with the arrow side up and
toward the reader. Insert the card
gently but firmly into the slot labeled
CompactFlash.
Figure 4:
Inserting CompactFlash card
Figure 5:
Inserting SmartMedia card
Figure 6:
Inserting SD-MultiMediaCard
Figure 7:
Inserting Memory Stick
• To insert a SmartMedia card,
position the card with the gold
connector side down and the
notched end toward the reader.
Insert the card gently but firmly into
the slot labeled SmartMedia.
• To insert a Memroy Stick, position
the card with the gold connector side
down and the tapered end toward
the reader. Insert the card gently but
firmly into the slot labeled Memory
Stick.
DDREADER-19 USB CF / SM / SD / MMC / MS Reader/Writer

Page 4 Delkin Devices User’s Manual
First time CompactFlash card use on Windows
When a CompactFlash card is first installed under Windows, an ADD NEW HARDWARE
Wizard will appear. In most cases, the software will be loaded automatically. Otherwise,
it will be necessary to select a driver during the hardware setup. The correct driver to
select is - Standard IDE/ESDI Hard Disk controller.
Basic Operation
• To avoid possible picture loss, it is recommended that you transfer picture files to
your computer hard drive before accessing or editing them.
• Using transfer software supplied with your camera is not recommended for use with
the reader, as most of these programs are designed specifically for your camera.
• Making changes to, or re-naming a file on the card may make the file unrecog-
nizable to the camera if the card is put back in the camera for viewing.
• The reader can be used to transfer files from a card to the computer, from the
computer to a card, or from a card to a card.
• The Reader-19 does not make any changes to the card or files while the files are
being accessed or transferred. Files are copied or moved exactly as they are read
by the reader.
• In order to view picture files, such as JPEG or TIFF formats, you will need a software
program (not included) that can view or edit these files. Most operating systems
include software that can view pictures. Some brands and models of digital camera
use proprietary formats for storing picture files and will require additional software to
view the pictures. Refer to your device manual for more information.
• When transferring files to a common location on your computer, it is recommended
that you re-name the files to avoid overwriting previous pictures. Most cameras
simply number the picture files and begin at 001 when a blank card is inserted,
which can result in two or more files on your computer having the same name,
prompting you to overwrite.
Accessing Files
The Reader-19 will appear as four Removable Disk drive icons in My Computer. The
drivers will provide an icon identifying the media type for each slot. The driver can be
loaded on Windows ME and XP for the purpose of identifying the slots, even though they
are not required for functionality. All card slots can be used concurrently.
To copy files from your card to your hard drive or vice versa:
1. Double click the appropriate Removable Disk icon in My Computer.
2. Simply drag and drop folders or individual files to a desired location.
Once the files are safely copied to your computer, the files on the card can be deleted to
clear the card for more pictures.
USB CF / SM / SD / MMC / MS Reader/Writer DDREADER-19

Delkin Devices User’s Manual Page 5
Removing a Card
To prevent errors, close any open files residing on the card.
•DO NOT remove the card while files are being accessed or transferred. This could
result in loss of data and/or damage to the card. Use the Eject command from the
file menu before removing the card.
To remove a card, simply pull it from the reader.
Formatting a Card
Although most cards are factory formatted, some devices may require the card to be
formatted in the camera or device before initial use. Some devices use a proprietary
format that will make the card unrecognizable to the computer or camera.
•Formatting a card will erase all pictures or files on the card.
•Formatting should be performed in the camera to insure compatibility.
•Formatting should not be used to clear unwanted files from the card.
If you do wish to format a card with a computer, perform the following steps:
1. In My Computer, right-click on the appropriate Removable Disk.
2. Select Format and follow on-screen instructions.
The installed drivers come with a formatting application which can be used to repair
corrupted cards. It can be accessed from Start/Programs/eFilm Reader-19/Digital Media
Formatter. Select the media type from the dropdown list and press Start.
Note: The File Allocation Table (FAT) used by Windows 2000 and XP to format the card
may be FAT 32, which will make the card unusable in most cameras and digital devices.
Make sure that FAT 16 or just FAT is selected when formatting cards.
Operational Notes
Your new Reader is part of a system of components that must function correctly and
compatibly in order to complete the simple process of moving files from your device to
your computer. The components involved are the Reader, Camera, Storage Card,
Computer (and its numerous components), USB interface, Software Drivers, and
Operating System. The Reader-19 is compatible with all cards that follow the specific-
ations presented by their various regulatory organizations, such as the CompactFlash
Association, SSFDC forum and MultiMediaCard Association.
•A corrupt file on your card can cause a device failure or system crash when
transferring files to your computer. Recovery programs such as Scandisk can be
used to detect and repair most disk errors. It may also be necessary to re-format
the card, which will erase all files stored on the card. Some of the causes of file
corruption are:
> Unsteady power supply while transferring files, such as a low camera battery or
improperly connected reader.
> Card removed from reader or camera, or any other type of interruption while
transfering or accessing files.
> Improperly formatted card.
DDREADER-19 USB CF / SM / SD / MMC / MS Reader/Writer

Page 6 Delkin Devices User’s Manual
•Minor malfunctions while using the Reader-19, such as system hangs, can usually
be resolved by simply re-booting the computer. Serious or recurring malfunctions
may require a re-installation of the Reader-19 drivers.
Network Conflicts - Windows®
The following procedure may be necessary when installing the e-Film Reader-19 onto a
computer connected to a network. In some cases, the computer may assign the Reader-
19 drive letters that have already been assigned to another drive, such as a network or
peripheral drive. This usually occurs after re-booting the computer with the Reader-19
connected. To avoid this conflict, the Reader-19 can be assigned an available drive
letter after you connect it to the computer but before re-booting. For more information,
contact your network administrator. If your computer is not connected to a network, and
there are no drive letter conflicts, these steps will not be necessary.
Windows ME and 98
1. Take note of the drive letters assigned to the reader and any network drives. The
Reader-19 will show up as four removable disk icons in My Computer - one for each
card slot.
2. Right click the My Computer icon on the desktop.
3. Select Properties from the menu.
4. Click the Device Manager tab.
5. Click the plus sign (+) next to Disk Drives.
6. The card slots will be listed as OEI-USB CompactFlash, OEI-USB SmartMedia, OEI-
USB MMC/SD and OEI-USB Memory Stick. Double click one of them to bring up a
properties window.
7. Click the Settings tab.
8. In the section labeled Reserved drive letters; use the arrow to select and assign a
Start drive letter (the End drive letter will change as well). Select a letter that does
not conflict with any other drives. This is best accomplished by selecting a letter
that is farther down the alphabet than any of your network drives. You will need to
re-boot for the changes to take effect.
9. Repeat the procedure for the other card slots.
Windows XP and 2000
The drive letters assigned to the Reader-19 can be manually assigned through Disk
Management, located under Administrative Tools. You must be logged on as System
Administrator before you can make these changes.
USB CF / SM / SD / MMC / MS Reader/Writer DDREADER-19

Troubleshooting
This is a very basic troubleshooting list. If your problem isn’t solved by those listed,
Please visit our web site http://www.delkin.com for FAQs and current information on
compatibility issues as well as the latest software drivers. Or see the back page for
contacting Tech Support.
SYMPTOM CAUSE SOLUTION
The Removable Disk icon does
not appear in the My Computer
window or are not accessible.
The driver software may not
have been properly or fully
installed .
The reader is not connected
properly.
The card is not inserted fully or
is upside down.
The operating system needs to
be updated with the latest
Service Pack (Windows 2000)
Reinstall from CD or update
driver software in Device
Manager - specifying the
Reader-19 folder on drive C:\
Check that Pin 1 matches on
the connector and header.
Remove and reinsert the card
using the card insertion guide
on page 3.
Download and install the latest
Windows 2000 Service Pack.
Download the full “Network”
version - the Windows Update
may not include all bug fixes.
The reader doesn’t appear to
be powered.
I’ve just received the dreaded
Windows “Blue Screen”.
Loose or improper cable
connections.
Check all cable connections
and power cords.
The card has been removed
while a file is still open on the
card.
The card was removed during
a read/write operation.
Recover if possible. But more
than likely you’ll need to restart
Windows.
Wait 5 to 10 seconds after any
activity before removing the
card. To avoid problems, you
can copy the data to the hard
drive before accessing it.
Delkin Devices User’s Manual Page 7
Windows
I formatted the card in the
reader and now my camera or
other digital device does not
recognize it.
The card has been formatted
using an unsupported file
system, such as FAT 32.
FAT 16 is the standard used by
most digital devices.
(FAT = File Allocation Table)
Reformat the card making sure
to use FAT 16, or just FAT.
Windows XP formats using
FAT 32 by default, so FAT must
be selected manually.
DDREADER-19 USB CF / SM / SD / MMC / MS Reader/Writer

Test Drive Your Equipment
We advise that you put all of your equipment through a dry run before transferring
important or irreplacable files. This will not only insure that your equipment is functioning,
but will also familliarize you with the transfer process.
Copy a few files to the card using your camera or digital device. Then insert the card into
the reader and use the transfer method you are most comfortalble with – drag and drop,
copy and paste, etc. Some devices, such as MP3 players, require third party software to
access files. Refer to the device manual for information. Once the files are stored on
your hard drive, access them one at a time and check that they are to your satisfaction.
Experiment until you are happy with the results and comfortable with the process. Then
you can simply delete the test files from the card to return it to its original state.
Page 8 Delkin Devices User’s Manual
USB CF / SM / SD / MMC / MS Reader/Writer DDREADER-19

Specifications
Specifications
DD MFG Part Number: DDREADER-19
Compatible Cards: CompactFlash Type I and Type II, SmartMedia,
Secure Digital, MultiMediaCard, Memory Stick,
IBM Microdrive
Compatible OS: Windows XP/2000/ME/98/98 SE
Host Interface: USB 1.1 (Universal Serial Bus) internal header
Transfer Rate: Up to 1MB/sec sustained Read, 1MB/sec
sustained Write
Dimensions: 4’’ (W) x 5.5’’ (L) x 1’’ (H)
Weight: ~11 oz
○○○○○○
○○○○○○○○
○○○○○○○○○○
○○○ ○○○○○○○
○○○○○○○○○○
○○○○○○○○○○○○
○○○○○○○○○○○○○○

FIVE YEAR PRODUCT WARRANTY
Delkin Devices, Inc. (DDI) warrants that this product has been thoroughly tested and
is free from defects in material and workmanship. This warranty is expressly limited to
product repair, modification, or replacement, at the sole discretion of DDI. The
maximum liability for any aspect of this warranty will be limited to an amount not
exceeding the original product purchase price.
This warranty is contingent upon proper use of the product in the application for which
it is intended and does not cover any product that has been modified, mis-used,
neglected or subjected to unusual physical stress. DDI will not repair or replace
products that fail solely because their estimated ‘life’ has expired.
The defective product must be returned to DDI. All shipping costs/ shall be the
responsibility of the purchaser. State and local laws may apply.
You will need a Return Merchandise Authorization (RMA) number before you return
the product. Please contact DDI for assistance in getting an RMA number.
Disclaimer
Except as provided herein, there are no express or implied warranties of mer-
chantability or fitness for a particular purpose. Under no circumstances will DDI be
liable in any way for any damages, including but not limited to lost revenue, lost
wages, or any other incidental or consequential damages arising from the use of or
inability to use this product.
The warranty set forth above is exclusive and no other warranty, whether written or
oral, is expressed or implied.
Delkin reserves the right to change specifications of hardware, software and instruc-
tions without notice.
Delkin Devices does not extend warranty to batteries. If batteries are supplied with the
product, it is as a convenience only, and as such, are covered by the battery
manufacturer’s warranty.
100% COMPATIBLE GUARANTEE
All Delkin Devices products are 100% guaranteed compatible with OEM machines for
which they are designed.
TECHNICAL SUPPORT
Delkin Devices can provide technical assistance with installation of a Delkin Devices
product. Any phone/e-mail charges are the responsibility of the purchaser.
CONTACTING DELKIN DEVICES
For Technical Support or Warranty information you can contact Delkin Devices by:
• phone at 858-391-1234 (9:00AM to 5:00PM PST Mon-Fri)
• e-mail at [email protected].
• on the web at http://www.delkin.com