Dell EMC VMAX3 Technical manual

Dell EMC™VMAX3™Family Site Planning
Guide
VMAX 100K, VMAX 200K, and VMAX 400K
Revision 12.0
April 2020

Copyright ©2014-2020 Dell Inc. or its subsidiaries. All rights reserved.
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.” DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND
WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED
IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell Technologies, Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property
of their respective owners. Published in the USA.
Dell EMC
Hopkinton, Massachusetts 01748-9103
1-508-435-1000 In North America 1-866-464-7381
www.DellEMC.com
2Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

7
9
Preface 11
Revision history................................................................................................. 13
Pre-planning tasks 15
Overview of data center requirements.............................................................. 16
Tasks to review................................................................................................. 16
Delivery and transportation 17
Delivery arrangements.......................................................................................18
Pre-delivery considerations............................................................................... 18
Moving up and down inclines............................................................................. 18
Shipping and storage environmental requirements............................................ 19
Specifications 21
Radio frequency interference............................................................................22
Recommended minimum distance from RF emitting device................. 22
Power consumption and heat dissipation.......................................................... 23
Adaptive cooling...................................................................................24
Airflow.............................................................................................................. 25
Air volume, air quality, and temperature............................................................26
Air volume specifications......................................................................26
Temperature, altitude, and humidity ranges......................................... 26
Temperature and humidity range recommendations.............................26
Air quality requirements....................................................................... 27
Shock and vibration.......................................................................................... 28
Sound power and sound pressure..................................................................... 28
Hardware acclimation times.............................................................................. 29
Optical multimode cables.................................................................................. 29
Open systems host and SRDF connectivity..........................................30
Data Center Safety and Remote Support 31
Fire suppressant disclaimer...............................................................................32
Remote support................................................................................................ 32
Physical weight and space 33
Floor load-bearing capacity...............................................................................34
Raised floor requirements................................................................................. 34
Physical space and weight................................................................................ 35
Position Bays 37
Figures
Tables
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
CONTENTS
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 3

System bay layouts...........................................................................................38
Adjacent layouts, single-engine array...................................................39
Adjacent layouts, dual-engine array..................................................... 40
Dispersed layouts, single-engine array.................................................. 41
Dispersed layout, dual-engine array..................................................... 42
Adjacent and dispersed (mixed) layout ................................................43
Dimensions for array layouts............................................................................. 44
Tile placement.................................................................................................. 45
Caster and leveler dimensions...........................................................................45
Power cabling, cords and connectors 49
Power distribution unit .....................................................................................50
Wiring configurations........................................................................................52
Power interface................................................................................................ 55
Customer input power cabling.......................................................................... 55
Best practices: Power configuration guidelines.................................................55
Power extension cords, connectors and wiring................................................. 56
Single-phase........................................................................................ 57
Three-phase Wye (International)......................................................... 62
Three-phase North American Delta......................................................65
Three-phase Wye (Domestic).............................................................. 67
Grounding Racks 69
Grounding requirements....................................................................................70
Grounding a single bay...................................................................................... 70
Chassis to chassis grounding............................................................................. 71
Third Party Racking Option 73
Computer room requirements .......................................................................... 74
Customer rack requirements ............................................................................75
Third party racks with vertical PDUs — RPQ Required ....................................77
Requirements for third party racks with vertical PDUs (rear-facing) .. 78
Requirements for third party racks with vertical PDUs (inward-facing) ..
80
Chassis to chassis grounding............................................................................. 81
Optional kits 83
Overhead routing kit......................................................................................... 84
Dispersion kits...................................................................................................84
Securing kits.....................................................................................................85
GridRunner kit and customer-supplied cable trough......................................... 85
Best Practices for AC Power Connections 87
Best practices overview for AC power connections.......................................... 88
Selecting the proper AC power connection procedure......................................89
Procedure A: Working with the customer's electrician onsite........................... 90
Procedure A, Task 1: Customer's electrician......................................... 91
Procedure A, Task 2: Dell EMC Customer Engineer ............................ 92
Procedure A, Task 3: Customer's electrician........................................96
Procedure B: Verify and connect...................................................................... 97
Procedure C: Obtain customer verification....................................................... 98
PDU labels........................................................................................................ 98
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Appendix
Contents
4Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

PDU label part numbers....................................................................... 98
Applying PDU labels, VMAX3 Family.................................................... 99
AC power specifications.................................................................................. 100
Contents
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 5

Contents
6Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

Typical airflow in a hot/cold aisle environment................................................................. 25
Adjacent layout, single-engine array................................................................................. 39
Adjacent layout, dual-engine array.................................................................................... 40
Dispersed layout, single-engine array................................................................................ 41
Dispersed layout, dual-engine, front view..........................................................................42
Adjacent and dispersed (mixed) layout, single-engine array..............................................43
Adjacent and dispersed (mixed) layout, dual-engine array................................................ 44
Layout dimensions, VMAX3 Family....................................................................................44
Placement with floor tiles, VMAX3 Family........................................................................ 45
Caster and leveler dimensions...........................................................................................46
Power distribution unit (PDU) without installed wire bales, rear view............................... 50
Power distribution unit (PDU) with installed wire bales, rear view.....................................51
Single-phase, horizontal 2U PDU internal wiring............................................................... 52
Three-phase (Delta), horizontal 2U PDU internal wiring................................................... 53
Three-phase (Wye), horizontal 2U PDU internal wiring.................................................... 54
Single-phase: E-PW40U-US............................................................................................. 59
Single-phase: E-PW40URUS............................................................................................ 60
Single-phase: E-PW40UIEC3............................................................................................60
Single-phase: E-PW40UASTL........................................................................................... 61
Single-phase: E-PW40L730...............................................................................................61
Flying leads, three-phase, international: E-PC3YAFLE, .................................................... 63
Three-phase, international: E-PCBL3YAG.........................................................................64
Three-phase, North American, Delta: E-PCBL3DHR.........................................................66
Three-phase, North American, Delta: E-PCBL3DHH.........................................................66
Three-phase, domestic (Black and Gray): E-PCBL3YL23P............................................... 68
Location of cabinet ground lugs........................................................................................ 70
Customer rack dimension requirements ........................................................................... 76
Requirements for customer rack with rear-facing, vertical PDUs......................................78
Requirements for third party rack with inward-facing, vertical PDUs............................... 80
Top routing cover..............................................................................................................84
Two independent customer-supplied PDUs.......................................................................88
Circuit breakers ON — AC power within specification...................................................... 91
Circuit breakers OFF — No AC power...............................................................................91
System bay power tee breakers (OFF = pulled out).......................................................... 92
Connecting AC power, single-phase................................................................................. 93
Connecting AC power, three-phase.................................................................................. 94
Power zone connections...................................................................................................95
PDU label , single-phase and three-phase......................................................................... 99
Label placement— Customer PDU Information................................................................ 99
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
FIGURES
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 7

Figures
8Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

Typographical conventions used in this content................................................................ 12
Revision history................................................................................................................. 13
Before you begin............................................................................................................... 16
Shipping and storage environmental requirements............................................................ 19
Minimum distance from RF emitting devices.....................................................................22
Power consumption and heat dissipation.......................................................................... 23
Airflow diagram key.......................................................................................................... 25
Maximum air volume......................................................................................................... 26
Environmental operating ranges........................................................................................26
Temperature and humidity................................................................................................ 26
Platform shock and vibration............................................................................................ 28
Sound power and sound pressure levels, A-weighted........................................................28
OM3 and OM4 Fibre cables — 50/125 micron optical cable............................................. 30
Space and weight requirements........................................................................................35
Adjacent layout diagram key............................................................................................. 39
Adjacent layout diagram key............................................................................................. 40
Caster and leveler dimensions diagram key....................................................................... 46
Extension cords and connectors options – single-phase................................................... 57
Extension cords and connectors options – three-phase international (Wye).................... 62
Extension cords and connectors options – three-phase North American (Delta)..............65
Extension cords and connectors options – three-phase Wye, domestic............................67
Overhead routing models.................................................................................................. 84
Dispersion kit model numbers............................................................................................84
Securing kit models...........................................................................................................85
Bottom routing model....................................................................................................... 86
Procedure options for AC power connection ....................................................................89
VMAX3 Family label part numbers, EMC racks ................................................................ 98
Input power requirements - Single-phase, North American, International, Australian ..... 100
Input power requirements - Three-phase, North American, International, Australian ......100
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
TABLES
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 9

Tables
10 Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

Preface
As part of an effort to improve its product lines, Dell EMC periodically releases revisions of its
software and hardware. Functions that are described in this document may not be supported by all
versions of the software or hardware. The product release notes provide the most up-to-date
information about product features.
Contact your Dell EMC representative if a product does not function properly or does not function
as described in this document.
Note: This document was accurate at publication time. New versions of this document might
be released on Dell EMC Online Support (https://www.dell.com/support/home). Check to
ensure that you are using the latest version of this document.
Purpose
This document is intended for use by customers and/or company representatives who want to
plan the purchase and installation of a VMAX3 Family system.
Audience
This document is intended for use by customers or company representatives.
Related documentation
The following documentation portfolios contain documents related to the hardware platform and
manuals needed to manage your software and storage system configuration. Also listed are
documents for external components which interact with your array.
EMC VMAX3 Family Product Guide for VMAX 100K, VMAX 200K, VMAX 400K with HYPERMAX OS
Provides product information regarding the purchase of a VMAX3 Family 100K, 200K, 400K.
Dell EMC VMAX Securing Kit Installation Guide
Describes how to install the securing kit on a VMAX3 Family array or VMAX All Flash array.
Dell EMC VMAX Best Practices Guide for AC Power Connections
Describes the best practices to assure fault-tolerant power to a VMAX3 Family array or VMAX
All Flash array.
Dell EMC VMAX Power-down/Power-up Procedure
Describes how to power-down and power-up a VMAX3 Family array or VMAX All Flash array.
HYPERMAX OS 5977.1125.1125 for EMC VMAX3 Family and VMAX All Flash Release Notes
Describes new features and any known limitations.
Special notice conventions used in this document
Dell EMC uses the following conventions for special notices:
Note: A NOTE indicates important information that helps you make better use of your product.
CAUTION A CAUTION indicates either potential damage to hardware or loss of data and tells
you how to avoid the problem.
WARNING A WARNING indicates a potential for property damage, personal injury, or death.
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 11

Typographical conventions
Dell EMC uses the following type style conventions in this document:
Table 1 Typographical conventions used in this content
Bold Used for names of interface elements
Examples: Names of windows, dialog boxes, buttons, fields, tab
names, key names, and menu paths (what the user selects or clicks)
Italic Used for full titles of publications referenced in text
Monospace Used for:
lSystem code
lSystem output, such as an error message or script
lPathnames, filenames, prompts, and syntax
lCommands and options
Monospace italic Used for variables
Monospace bold Used for user input
[ ] Square brackets enclose optional values.
| A vertical bar indicates alternate selections. The bar means “or”.
{ } Braces enclose content that the user must specify, such as x or y or
z.
... Ellipses indicate nonessential information that is omitted from the
example.
Where to get help
Support, product and licensing information can be obtained as follows:
Product information
Dell EMC technical support, documentation, release notes, software updates, or information
about Dell EMC products can be obtained at https://www.dell.com/support/home
(registration required) or https://www.dellemc.com/en-us/documentation/vmax-all-flash-
family.htm.
Technical support
To open a service request through the Dell EMC Online Support (https://www.dell.com/
support/home) site, you must have a valid support agreement. Contact your Dell EMC sales
representative for details about obtaining a valid support agreement or to answer any
questions about your account.
Your comments
Your suggestions help improve the accuracy, organization, and overall quality of the
documentation. Send your comments and feedback to: [email protected]
Preface
12 Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

Revision history
Table 2 Revision history
Revision Description and/or change
12.0 Added note to provide strain relief when host cabling and power are handled
from overhead or wall-mounted.
11.0 Add top routing cover graphic.
10.0 Add line in grounding chapter that both grounding straps must be installed
for chassis to chassis grounding.
9.1 Fixed broken link to overhead routing kit section.
9.0 Added rack grounding chapter
8.2 Removed all references to maintaining .25" between bays.
8.1 Added recommendation for chassis to chassis grounding for multiple bay
systems.
8.0 Modified power consumption and heat dissipation specifications to include
steady state and maximum values.
7.0 Corrected formula for 3rd party rack cabinet width requirements.
6.0 Updated wiring configuration diagrams and content for new 2U PDUs.
Updated power distribution unit recommendations for overhead power.
5.0 lMinor edits for consistency and readability.
lAdded new table row and values for "Storage time (unpowered)" in the
topic, "Shipping and storage environmental requirements."
lAdded line item to
Optical multimode cables topic:
OM4 cables are used for SRDF connectivity over 16 Gb/s Fibre Channel I/O
modules.
4.2 lAdded information and diagrams for third party racks with vertical
PDUs.
lUpdated heat dissipation value for system bay 2 in a dual engine
system.
nFor a 200K: Max heat dissipation changed from 30,975 to 28,912
Btu/Hr.
nFor a 400K: Max heat dissipation changed from 30,975 to 29,688
Btu/Hr.
lAdded the following note to PDU and wiring configuration topics:
Note: The PDU AC power cords (single-phase and three-phase)
extend 74" (188cm) from the PDU chassis and are designed to
reach to the bay floor egress for connection to the customer power
supply. 15' (4.57m) extension cables are provided.
4.1 lUpdate: Statement re: redundant PDUs.
lAdded note to Power and heat dissipation topic.
Preface
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 13

Table 2 Revision history (continued)
Revision Description and/or change
lUpdated rack diagram for third party rack requirements.
4.0 Updates:
lVersion numbering (to 4.0).
lRemoved dual-engine dispersion reference in System layouts topic:
"With dual-engine dispersion, bay placement can be wherever the
customer wants in the data center."
3.3 Updates:
l3rd party customer rack dimension requirements graphic.
lSingle and dual-engine layout graphics.
3.2 New: NOTICE in Best practices overview for AC power connections.
3.1 Update: Customer-to-system 3-phase connectors.
3 Update: Environmental operating ranges table.
2 Update: Dual-engine layout graphic.
1 First release of the VMAX 100K, 200K, and 400K arrays with EMC
HYPERMAX OS 5977.
Preface
14 Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

CHAPTER 1
Pre-planning tasks
This chapter includes:
lOverview of data center requirements...................................................................................16
lTasks to review...................................................................................................................... 16
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 15

Overview of data center requirements
VMAX arrays are designed for installation in data centers that provide:
lSufficient physical space
lControlled temperature and humidity
lAirflow and ventilation
lPower and grounding
lSystem cable routing facilities
lFire protection
Raised floors are preferred.
For information regarding overhead cable routing, see Overhead routing kit on page 84.
To prepare the site for an array, meet with your Dell EMC Systems Engineer and Customer
Engineer to determine what is needed to prepare for delivery and installation. One or more
sessions may be necessary to finalize installation plans.
Tasks to review
The following table provides a list of tasks to review during the planning process:
Table 3 Before you begin
Task Comments and/or Provide
Identify power requirements with customer and
customer electrician.
External AC power must be supplied from an
independent customer-supplied power distribution unit
(PDU).
Dell EMC recommends that the customer’s electrician be
available at the installation site for regular and third party
racked arrays.
Best Practices for AC Power Connections on page 87
provides details.
For customer-supplied third party rack support, see the
detailed physical requirements in Third Party Racking
Option on page 73.
The field representative working the order must:
lReview the requisite information regarding the third
party racking option.
lIn Sizer, select the desired configuration. In the
Hardware Options screen, under Rack Type, select
Third Party.
Complete the Installation Planning Task Sheet and Presite
Survey in DXCX.
lConnection for ConnectEMC to dial home to the Dell
EMC Support Center. Data Center Safety and
Remote Support on page 31 provides additional
details on remote support.
lPower, cooling and ventilation, humidity control,
floor load capability, system placement, and service
clearances as required in the data center.
Pre-planning tasks
16 Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

CHAPTER 2
Delivery and transportation
This chapter includes:
lDelivery arrangements........................................................................................................... 18
lPre-delivery considerations....................................................................................................18
lMoving up and down inclines................................................................................................. 18
lShipping and storage environmental requirements.................................................................19
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 17

Delivery arrangements
Delivery within the United States or Canada is by air-ride truck with custom-designed shipping
material, crate, and pallet. International delivery normally involves air freight.
Unless otherwise instructed, the Dell EMC Traffic Department arranges for delivery directly to the
customer’s computer room. To ensure successful delivery of the system, Dell EMC has formed
partnerships with specially selected moving companies. These companies have moving
professionals trained in the proper handling of large, sensitive equipment and provide the
appropriate personnel, floor layments, and any ancillary moving equipment required to facilitate
delivery. Moving companies should check general guidelines, weights, and dimensions.
NOTICE Inform Dell EMC of any labor union-based restrictions or security clearance
requirements prior to delivery.
Pre-delivery considerations
Take into account the following considerations prior to the delivery at your site:
lWeight capacities of the loading dock, tailgate, and service elevator if delivery is to a floor
other than the receiving floor.
lLength and thickness of covering required for floor protection.
lEquipment ramp availability if the receiving floor is not level with computer room floor.
lSet up the necessary network and gateway access to accommodate Secure Remote Services
so that it will be available and operable for the installation date.
Moving up and down inclines
To prevent tipping when moving up and down inclines, close all doors and drawers. Push from the
rear of the rack so that the front (side with bezels or a fancy door) goes first.
All portions of the bay will clear ramp and threshold slopes up to 1:10 (rise to run ratio), per Code
of Federal Regulations — ADA Standards for Accessible Design, 28 CFR Part 36.
Delivery and transportation
18 Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

Shipping and storage environmental requirements
The following table provides the environmental requirements for shipping and storage:
Table 4 Shipping and storage environmental requirements
Condition Setting
Ambient temperature -40° to 149° F (-40° to 65° C)
Temperature gradient 43.2° F/hr (24° C/hr)
Relative humidity 10% to 90% noncondensing
Storage time (unpowered) Recommendation: Do not exceed 3
consecutive months of unpowered storage.
Delivery and transportation
Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 19

Delivery and transportation
20 Dell EMC™VMAX3™Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K