Dell E2223HV User manual

Dell E2223HV
User’s Guide
Monitor Model: E2223HV
Regulatory Model: E2223HVf

Notes, Cautions and Warnings
NOTE: A NOTE indicates important information that helps you make
better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other are trademarks
of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
2022 - 02
Rev. A00

Contents │ 3
Contents
About your monitor ...........................................5
Package contents ..................................................... 5
Product features....................................................... 6
Identifying features and controls................................ 7
Pin assignments .......................................................15
Plug and play capability .............................................16
LCD monitor quality and pixel policy ...........................16
Maintenance guidelines .............................................16
Setting up the monitor ..................................... 17
Connecting the stand................................................17
Connecting your monitor ...........................................18
Organizing cables .....................................................18
Removing the stand ..................................................19
Operating your monitor .................................... 21
Turning on the monitor ..............................................21
Using the front panel controls....................................21
Using the On-Screen Display (OSD) menu.................. 26
Setting up display resolution on your monitor ............. 39
Using tilt..................................................................41

4 │ Contents
Troubleshooting ...............................................42
Self-test ................................................................. 42
Built-in diagnostics .................................................. 43
Common problems ................................................... 44
Product-specific problems........................................ 46
Appendix .........................................................47
FCC Notices (U.S. Only) and Other Regulatory
Information ............................................................. 47
Contact Dell ............................................................ 47
EU product database for energy label and product
information sheet .................................................... 47

About your monitor │5
About your monitor
Package contents
Your monitor ships with the components indicated in the table. Ensure that you have received
all the components and see Contact Dell if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features may not be available in certain countries.
NOTE: To set up Stand from any other source, refer to the documentation
comes with the Stand for instruction.
Component image Component description
Display
Stand riser
Stand base
VESA™ Screw Cover
Power cable (varies by country)
VGA cable

6│About your monitor
• Quick Start Guide
• Safety, Environmental, and
Regulatory Information
Product features
The Dell E2223HV flat panel monitor has an active matrix, Thin-Film Transistor (TFT),
Liquid Crystal Display (LCD) Panel with LED backlight.
The monitor features include :
• 54.48 cm (21.45 in.) diagonal viewable area display (measured diagonally).
1920 x 1080 resolution, with full-screen support for lower resolutions.
• Wide viewing angles of 178 degrees in vertical and horizontal directions.
• Contrast ratio (3000:1).
• Plug and play capable if supported by your computer.
• On-Screen Display (OSD) adjustments for easy setup and screen optimization.
• ≤ 0.3 W in Standby Mode.
• Optimize eye comfort with a flicker-free screen.
• The monitor adopts flicker-free technology, which clears the eye visible flicker, brings
comfort viewing experience and preventing users suffer from eye strain and fatigue.
• Possible long-term effects if blue light emission from the monitor may cause damage to
the eyes, including eye fatigue or digital eye strain. ComfortView feature to reduce risk of
eye strain from high blue light emission.
• Security-lock slot.
• Arsenic-free glass and Mercury-free for panel only.
• BFR/PVC-Reduced (Its circuit boards are made from BFR/PVC-free laminates).
• Meets NFPA 99 leakage current requirement.
• TCO Certified.
• EPEAT registered where applicable. EPEAT registration varies by country.
See https://www.epeat.net for registration status by country.
• RoHS Compliant.
• Energy Star®Certified.

About your monitor │7
Identifying features and controls
Front view
Label Description Use
1Function buttons To access the OSD menu and change
the settings if required. For more
information, see Using the front
panel controls.
2Power On/Off button
(with LED indicator)
To turn the monitor On or Off.
Solid white light indicates that the
monitor is turned on and functioning
normally. Blinking white light indicates
that the monitor is in Standby Mode.

8│About your monitor
Back view
With monitor stand
5
4
Without monitor stand
1 32
Label Description Use
1Security-lock slot
(based on Kensington Security
SlotTM)
Secures monitor with security cable lock
(sold separately)
2Barcode, serial number, and
service tag label
See this label if you need to contact Dell
for technical support. The Service Tag
is a enables Dell service technicians to
identify the hardware components in your
computer and access warranty information.
3Regulatory information List the regulatory approvals.
4Cable-management clip To organize the cables.
5Stand release button Release stand from monitor.
Side view

About your monitor │9
Bottom view, without monitor stand
1 2
Label Description Use
1Power port To connect the monitor power cable.
2VGA port For connection to your computer using VGA cable.

10 │About your monitor
Monitor specifications
Model E2223HV
Screen type FHD TFT LCD
Panel type Vertical Alignment (VA)
Viewable area
Diagonal 544.83 mm (21.45 in.)
Active area
Horizontal
Vertical
Area
478.66 mm ( 18.84 in.)
260.28 mm ( 10.25 in.)
1245.86 cm2(193.11 in.2)
Pixel pitch 0.249 mm x 0.241 mm
Pixel per inch (PPI) 103
Viewing angle
Horizontal
Vertical
178° (typical)
178° (typical)
Brightness 250 cd/m² (typical)
Contrast ratio 3,000 to 1 (typical)
Faceplate coating Anti-glare with 3H hardness
Backlight LED edgelight system
Response time
Normal mode
Fast mode
< 12 ms
< 8 ms
Color depth 16.7 million colors
Color gamut 72% (CIE1931)
83% (CIE1976)
Dell display manager
compatibility
Yes
Connectivity 1 x VGA
Bezel width (edge of
monitor to active area)
12.8 mm (Top)
12.8 mm (Left/Right)
16.9 mm (Bottom)
Security Security-lock slot for cable lock (optional purchase)
Tilt angle -5° to 21°

About your monitor │11
Resolution specifications
Model E2223HV
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 50 Hz to 75 Hz (automatic)
Maximum preset resolution 1920 x 1080 @ 60 Hz
Preset display modes
Display mode Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
Pixel clock
(MHz)
Sync polarity
(Horizontal/Vertical)
VESA, 720 x 400 31.5 70.1 28.3 -/+
VESA, 640 x 480 31.5 59.9 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x1024 64.0 60.0 108.0 +/+
VESA, 1280 x1024 80.0 75.0 135.0 +/+
VESA, 1600 x 900 60.0 60.0 108.0 +/+
VESA, 1920 x1080 67.5 60.0 148.5 +/+

12 │About your monitor
Electrical specifications
Model E2223HV
Video input signals Analog RGB: 0.7 V ± 5 %,
75 Ω input impedance
Synchronization
input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
AC input voltage/
frequency/current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/0.7 A
Inrush current 30 A (120 V AC Input)
60 A (240 V AC Input)
Power Consumption 0.3 W (Off Mode)1
0.3 W (Standby Mode)1
12.13 W (On Mode)1
19 W (Max)2
12.83 W (Pon)3
40.02 kWh (TEC)3
1As defined in EU 2019/2021 and EU 2019/2013.
2Max brightness and contrast setting.
3Pon : Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which
can be restored by "Factory Reset" function in the OSD menu. Changing
the factory default settings or enabling other features may increase power
consumption that could exceed the ENERGY STAR specified limit.

About your monitor │13
Physical characteristics
Model E2223HV
Signal cable type:
Analog
D-Sub (VGA), 15 pins
NOTE: Dell monitors are designed to work optimally with the video cables that are
shipped with your monitor. As Dell does not have control over the different cable suppliers
in the market, the type of material, connector and process used to manufacture these
cables, Dell does not guarantee video performance on cables that are not shipped with
your Dell monitor.
Dimensions (with stand):
Height 384.17 mm (15.12 in.)
Width 504.26 mm (19.85 in.)
Depth 171.00 mm (6.73 in.)
Dimensions (without stand):
Height 295.38 mm (11.63 in.)
Width 504.26 mm (19.85 in.)
Depth 49.64 mm (1.95 in.)
Stand dimensions:
Height 174.02 mm (6.85 in.)
Width 222.03 mm (8.74 in.)
Depth 171.00 mm (6.73 in.)
Weight:
Weight with packaging 4.01 kg (8.84 lb)
With stand assembly
and cables 2.90 kg (6.39 lb)
Without stand
assembly and cables 2.26 kg (4.98 lb)
Weight of stand
assembly 0.33 kg (0.73 lb)

14 │About your monitor
Environmental characteristics
Model E2223HV
Temperature:
Operating 0 °C to 40 °C (32 °F to 104 °F)
Non-operating:
Storage/Shipping -20 °C to 60 °C (-4 °F to 140 °F)
Humidity:
Operating 10% to 80% (non-condensing)
Non-operating:
Storage/Shipping 5% to 90% (non-condensing)
Altitude:
Operating (maximum) 5,000 m (16,400 ft)
Non-operating (maximum) 12,192 m (40,000 ft)
Thermal dissipation 64.79 BTU/hour (maximum)
41.36 BTU/hour (typical)

About your monitor │15
Pin assignments
D-Sub 15-pin connector
Pin Number Signal Assignment
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5 V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock

16 │About your monitor
Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so the computer can configure itself and
optimize the monitor settings. Most monitor installations are automatic, you can select
different settings as required . For more information about changing the monitor settings,
see Operating your monitor.
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is normal for one or more pixels to
become fixed in an unchanging state, which are hard to see and do not affect the display
quality or usability. For more information about Dell Monitor Quality and Pixel Policy, see
Dell Support site at www.dell.com/pixelguidelines.
Maintenance guidelines
Cleaning your monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable
from the electrical outlet.
CAUTION: Read and follow the Safety instructions before cleaning the
monitor.
Improper cleaning methods can result in physical damage to Dell monitors. Physical
defects may affect the screen and body of the monitor.
Follow the instructions in the list below when cleaning the monitor:
• To clean the Dell Monitor screen, lightly dampen a soft, clean cloth with water. If
possible, use a special screen-cleaning tissue or solution suitable for the Dell Monitor
screen.
• CAUTION: Do not use detergents of any kind or other chemicals such as benzene,
thinner, ammonia, abrasive cleaners, alcohol, or compressed air.
• Do not directly spray the cleaning solution or even water on the surface of the
monitor. Directly spraying liquid onto the panel will roll down to the bottom of the panel
and corrode the electronics resulting in permanent damage.
• Instead, apply solution or water to soft cloth material.
NOTE: Using cleaner may cause changes in the appearance of the monitor, such
as color fading, milky film on the monitor, deformation, uneven dark shade, and screen
surface peeling.
NOTE: Monitor damages due to improper cleaning methods and the use of
benzene, thinner, ammonia, abrasive cleaners, alcohol, compressed air, detergent of
any kind will lead to a Customer Induced Damage (CID). CID is not covered under the
standard Dell warranty.

Setting up the monitor │17
Setting up the monitor
Connecting the stand
NOTE: The stand is not attached when the monitor is shipped from the
factory.
NOTE: The following procedure is applicable for the stand that shipped
with your monitor.
To attach the monitor stand:
1. Assemble the stand riser to stand base.
a. Place the monitor stand base on a stable table top.
b. Slide the monitor stand body in the correct direction down onto the stand base
until it clicks into place.
2. Attach the stand assembly to the monitor.
a. Place the monitor on a soft cloth or cushion near the edge of desk.
b. Align the stand assembly bracket to the monitor groove.
c. Insert the bracket towards monitor until it locks in place.
d. Attach VESA cover.

18 │Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety instructions.
NOTE: Do not connect all cables to the computer at the same time. It is
recommended to route the cables through the cable-management slot
before you connect them to the monitor.
NOTE: Dell monitors are designed to work optimally with Dell supplied
inbox cables. Dell does not guarantee the video quality and performance
when using non-Dell cables.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect VGA cable from your monitor to the computer.
Connecting VGA cable
VGA
VGA
Organizing cables
Use the cable-management clip to route the cables connected to your monitor.

Setting up the monitor │19
Removing the stand
NOTE: To prevent scratches on the screen when removing the stand, ensure
that the monitor is placed on a soft and clean surface.
NOTE: The following procedure is applicable for the stand that shipped with
your monitor.
To remove the stand:
1. a. Place the monitor on a soft cloth along the desk.
b. Tilt the stand upwards to access to the release button.
2. a. Use a long and thin screwdriver to push the release latch located in a hole just above
the stand.
b. Once the latch is released, remove the base away from the monitor.
c. Press down on the quick release tab latch on the bottom of the base to separate
base from stand riser.

20 │Setting up the monitor
To remove the VESA cover:
Press the dimple on the VESA cover to release it from the back of the display.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible base mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable flat table.
2. Remove the stand.
3. Use a screwdriver to remove the four screws securing the plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the LCD.
5. Mount the LCD on the wall by following the instructions that came with the base
mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall-mount bracket with
minimum weight/load bearing capacity of 9.04 kg (19.93 lb) for E2223HV.