Dell P2210 SFF AIO User manual

Dell™P2210SFFAIOFlatPanelMonitorUser'sGuide
Notes, Cautions, and Warnings




Information in this document is subject to change without notice.
©2009DellInc.Allrightsreserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELLlogoaretrademarksofDellInc;Microsoft and Windows are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an
ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc.
disclaims any proprietary interest in trademarks and trade names other than its own.
P2210f
28 August 2009Rev.A01


About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix

NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Back to Contents Page

About Your Monitor
Dell™P2210SFFAIOFlatPanelMonitorUser'sGuide
Package Contents
Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.

Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
Universal Serial Bus (USB) Interface
LCD Monitor Quality and Pixel Policy
Maintenance Guidelines
NOTE: Some items may be optional and may not ship with your Monitor. Some features or media may not
be available in certain countries.
lMonitor
lCable cover


lStand
lPower Cable
lVGA Cable (attached to the monitor)
lDVI Cable
lUSB up stream cable (enables the USB ports on the monitor)
lDrivers and Documentation media
lQuick Setup Guide
lSafety Information
lStand Template sheet

Product Features
The P2210 SFF AIO flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:
■22-inch (558.68 mm) viewable area display (Measured diagonally) .
■1680 x 1050 resolution, plus full-screen support for lower resolutions.
■Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.
■Tilt, swivel, vertical extension adjustment capabilities.
■Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.
■Plug and play capability if supported by your system.
■Retractable label card allows convenient access to monitor serial number for technical support and easily hidden away providing label-free clean look.
■On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■Software and documentation media includes an information file (INF), Image color Matching File (ICM), and product documentation.
■Energy Saver feature for Energy Star compliance.
■Security lock slot on monitor and stand.
■Asset Management Capabilities.
■Capability to switch from wide aspect to standard aspect ratio while maintaining the image quality.
■Halogen Reduced
■MonitorstandintegratingaDellOptiPlex™960SmallFormFactorcomputer,cablecoverandmonitorinanAll-In-One configuration.
■Single step auto engagement and removal of computer and cable cover from the monitor stand.
■Provision of screw holes below stand base allow desktop mounting for added security.
■Lockablecablecoverhelpscablearrangementandpreventscabletheft.
■Cable management clip on the back of stand to route cables.
Identifying Parts and Controls
Front View
Front View
Front panel controls
Label
Description
1
Preset Modes (default, but configurable)
2
Brightness & Contrast (default, but configurable)
3
Menu
4
Exit

Back View

Label Card View

5
Power (with power light indicator)
Back view
Back view with monitor stand
Label
Description
Use
1
VESA mounting holes (100 mm x 100 mm -
behind attached base plate)
Wall mount monitor using VESA compatible wall mount kit (100 mm x 100 mm)
2
Stand removal button
Release stand from monitor.
3
Security lock slot
Secures monitor with security cable lock
4
Dell Soundbar mounting brackets
Attaches the optional Dell Soundbar.
5
Information mark
Help locating regulatory and barcode labels
6
Auto retractable handle
Enable full monitor and computer system transportability.
7
Unlock switch
Releases computer and cable cover from stand.
8
Cable management clip
Organizes cables
9
Stand security lock slot
Secures computer and cable cover with security lock
NOTE: Monitor shipped with label card fully inserted in USB compartment. Pull out the label card to access
the barcode serial number label and regulatory rating label.
Back View with label card pulled out




Side View



Bottom View
Front View with label card pulled out
Label
Description
Use
1
Regulatory label
Lists the regulatory approvals.
2
Barcode serial number label
To contact Dell for technical support.
Left view
Right view
Label
Description
Use
1
USB downstream ports
Connect your USB devices.
2
Label card
Provide clean monitor back view when reference to labels is not required.


Top View


Bottom view
Bottom view with monitor stand
Label
Description
Use
1
AC power cord connector
Connect the power cable
2
DC power connector for Dell Soundbar.
Connect the power cord for the soundbar (optional)
3
DisplayPort connector
Connect your computer DP cable
4
DVI connector
Connect your computer DVI cable
5
VGA connector
Connect your computer VGA cable
6
USB upstream port
Connect the USB cable that came with your monitor to the monitor and the
computer. Once this cable is connected you can use the USB connectors on
the side and bottom of the monitor.
7
USB downstream ports
Connect your USB devices. You can only use this connector after you have
connected the USB cable to the computer and USB upstream connector on
the monitor.
8
Desktop mount screw holes (4x)
To mount stand on desktop for added security
9
Swivel rollers
To swivel monitor




Label
Description
Use
1
Computer alignment feature
Matches the front contour of computer.
2
Chassis hooks
Locks computer onto stand.
3
Hook trigger
Detects when computer is on stand and engages
chassis hooks.
4
Computer platform
Supports computer and cable cover on stand.
5
Cable cover latch
Release cable cover from stand.
6
Computer alignment ramp
Matches the rear edge of computer.
Monitor Specifications
Flat Panel Specifications
*[P2210 SFF AIO color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.
Screen type
Active matrix - TFT LCD
Panel type
TN
Screen dimensions
22 inches (22-inch viewable image
size)
Preset display area:
473.76(H)X296.1(V)
Horizontal
473.76 mm (18.7 inches)
Vertical
296.1 mm (11.7 inches)
Pixel pitch
0.282 mm
Viewing angle
160°(vertical)typical
170°(horizontal)typical
Luminance output
250 CD/m²(typical)
Contrast ratio
1000 to 1 (typical), 10000 to 1
(typical Dynamic Contrast On)
Faceplate coating
Antiglare with hard-coating 3H
Backlight
2-CCFL edge light system
Response Time
5ms panel typical
Color depth
16.7 million colors
Color Gamut
83%*