Dell EMC ScaleIO Ready Node 14G Installation instructions

Maintenance
EMC ScaleIO Ready Node 14G
Server Inspection Guide
P/N 302-004-342
REV 01
October 2017
lPreface...................................................................................................................2
lIntroduction............................................................................................................ 3
lHardware Installation Checklist...............................................................................3
lPrerequisites.......................................................................................................... 5
lVerify the status of the system hardware, storage controller, and disks.................6

Preface
As part of an effort to improve its product lines, EMC periodically releases revisions of
its software and hardware. Therefore, some functions described in this document
might not be supported by all versions of the software or hardware currently in use.
The product release notes provide the most up-to-date information on product
features.
Contact your EMC technical support professional if a product does not function
properly or does not function as described in this document.
Note
This document was accurate at publication time. Go to EMC Online Support (https://
support.emc.com) to ensure that you are using the latest version of this document.
Related documentation
The release notes for your version includes the latest information for your product.
The following EMC publication sets provide information about your ScaleIO or ScaleIO
Ready Node product:
lScaleIO software (downloadable as ScaleIO Software <version> Documentation
set)
lScaleIO Ready Node with AMS (downloadable as ScaleIO Ready Node with AMS
Documentation set)
lScaleIO Ready Node no AMS (downloadable as ScaleIO Ready Node no AMS
Documentation set)
lVxRack Node 100 Series (downloadable as VxRack Node 100 Series
Documentation set)
You can download the release notes, the document sets, and other related
documentation from EMC Online Support.
Typographical conventions
EMC uses the following type style conventions in this document:
Bold Used for names of interface elements, such as names of windows,
dialog boxes, buttons, fields, tab names, key names, and menu paths
(what the user specifically selects or clicks)
Italic Used for full titles of publications referenced in text
Monospace Used for:
lSystem code
lSystem output, such as an error message or script
lPathnames, filenames, prompts, and syntax
lCommands and options
Monospace italic Used for variables
Monospace bold Used for user input
[ ] Square brackets enclose optional values
| Vertical bar indicates alternate selections - the bar means “or”
Maintenance
2Maintenance

{ } Braces enclose content that the user must specify, such as x or y or
z
... Ellipses indicate nonessential information omitted from the example
Where to get help
EMC support, product, and licensing information can be obtained as follows:
Product information
For documentation, release notes, software updates, or information about EMC
products, go to EMC Online Support at https://support.emc.com.
Technical support
Go to EMC Online Support and click Service Center. You will see several options
for contacting EMC Technical Support. Note that to open a service request, you
must have a valid support agreement. Contact your EMC sales representative for
details about obtaining a valid support agreement or with questions about your
account.
Your comments
Your suggestions will help us continue to improve the accuracy, organization, and
overall quality of the user publications. Send your opinions of this document to
[email protected].
Introduction
This document provides an overview of the inspection process for ScaleIO Ready
Node servers.
When the node is powered on, the front panel blue LED should light up and be steady.
In addition, neither the power supplies nor drives should have any amber LEDs lit.
If the front panel LEDs are either blinking or colored amber, or if the drives light up an
amber LED, use the information in the following sections to check the nodes. The
sensor information and the Event log information are available via the BMC. You can
access the information on the drives from the PERCCLI utility.
Before you begin, ensure that you know the IP address of the BMC (iDRAC) port on
the server.
Perform the following steps to inspect a server:
lCheck the hardware installation.
lCheck the sensors.
lEnable the disk utility.
lVerify the drive status.
lPrepare the hardware for failure analysis, if necessary.
Hardware Installation Checklist
This section includes a hardware checklist to be used by the CE.
It is the CE's responsibility to complete this checklist.
Customer Name: CE Name:
Customer Location:
Server Inspection Guide
Introduction 3

Installation Type: lNew Installation
lAdd-On
lRevisit
lOther (specify) ___________________
Install Start Date: Install End Date:
ScaleIO Hardware Info
ScaleIO Node Type Check all that apply:
l1U1N Qty:
l2U1N Qty:
lMgmt. Server
Network Equipment: lMgmt Switch Qty:
lData Switch Qty:
lMgmt. Server
Packaging Issues:
Item Observation Notes
Missing rails/screws/docs
Physical damage to node
Physical damage to switch
Other
Hardware Checks (prior to powering on the server)
Item Observation Notes
Server/node can move freely
on rails
PSU seated (reseat if loose)
Power-cords secured with
retaining clips
Drives seated (do *NOT* pull
drives yet)
Bezels installed if available
Rack stable and castor wheels
locked
Network cables labelled and
clicked-in
Hardware checks: (post power-up)
Item Observation Notes
Server responds to power-
button
Maintenance
4Maintenance

All PSUs power-on
Rear fan-spin (feel air-flow)
PSU has no amber LED on
Server has no amber LED on
HDD/SSD has no amber LED
on (reseat and reset the
server)
Attach KVM, reset/power-
cycle server and note down
error displayed, if any are
shown. Open SRs for errors.
Other issues:
Briefly list any hardware issues identified ( list any cases/SRs opened):
Prerequisites
Prerequisites for inspecting a server in the ScaleIO Ready Node environment are as
follows:
General prerequisites
lEnsure that you know the IP address range, subnet, and gateway IP addresses for
the BMC (iDRAC) port for all servers.
lTo connect via a service PC or laptop computer using SSH/RDP, ensure that the
computer has a functional network port and an available IP address (and subnet
and gateway) on the management network.
lFor console operations (KVM access), ensure that you have either a VGA tool kit
to allow console connection from a laptop computer to a server, or a computer
screen and keyboard connection to the rack.
Java requirements
Use Required version
ScaleIO GUI Java 1.8 latest update
BMC (iDRAC) management client (Java
console)
Java 1.7 latest update
In your Internet browser, ensure that pop-ups are enabled (or enabled just for the
Java console features).
Internet browsers
The following internet browsers are supported:
lFirefox 30 or higher
lInternet Explorer 8 or higher
lGoogle Chrome
Server Inspection Guide
Prerequisites 5

Verify the status of the system hardware, storage
controller, and disks
Verify the status of the system hardware, storage controller, and disks on a ScaleIO
Ready Node server.
Before you begin
Ensure that you know:
lThe IP address of the BMC (iDRAC) port
lThe username and password for the BMC (iDRAC) portal (default username and
password are root and password)
Procedure
1. From a browser, go to http:// <BMC/iDRAC_IP_address> .
The DELL Console Login window is displayed.
2. Type the user name and password, then click Login.
The Dashboard displays the high-level status of all hardware devices in the
System Health pane.
In an ideal scenario, all hardware sensors should appear in green.
3. To view the event log (SEL log), on the Dashboard select Maintenance >
System Event Logs.
The System Event Log pane is displayed with color-coded severity levels.
4. Ensure that any power supply- and fan-related events in the event log are non-
repetitive. Repetitive events may be due to the intermittent nature of faults,
such as poor physical connections.
For repetitive events, it is recommended that you remove the relevant hardware
module and replace it in its socket.
5. In the navigation pane, select Storage > Overview > Controller.
A table displays the controller-related information, with the controller type in
the Name column. For example:
PERC H740P Adapter (PCI Slot 4)
PERC H740P Mini (Embedded) or PERC H730 Mini (Embedded)
PERC H740P Mini (Embedded) or PERC H730 Mini (Embedded)
6. In the navigation pane, select Storage > Physical Disks.
A table displays information regarding the physical disks, and an option to
Blink/Unblink the selected disk.
7. Verify that no disk is in the failed state.
If any of the disks is failed, refer to the relevant disk FRU.
8. In the navigation pane, select System.
9. In the Inventory pane, verify that the server drivers and firmware in the
Firmware Inventory list match the required versions, as published in the
ScaleIO Ready Node Driver and Firmware Matrix.
Maintenance
6Maintenance

If the driver and firmware versions do not match the matrix, you must update
them. See "Updating the BIOS, firmware and settings" in the ScaleIO Ready
NodeAMS Deployment Guide .
Server Inspection Guide
Verify the status of the system hardware, storage controller, and disks 7

Copyright ©2017 Dell Inc. or its subsidiaries. All rights reserved.
Published October 2017
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.“ DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH
RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED IN THIS PUBLICATION
REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners.
Published in the USA.
Maintenance
8Maintenance