Delta Children BB86983PS User manual

Toddler to Twin Carriage Bed
THIS ITEM REQUIRES ASSEMBLY BYANADULT BECAUSE OF SMALL PARTS. CARE SHOULD BE TAKEN IN UNPACKING AND ASSEMBLY OFTHIS PRODUCT.
WARNING:
BB86983PS Toddler Bed • BB87191PS Twin Bed

2
(2) Side Panel Female (2) Side Panel Male
(1) Seat Panel
(2) Headboard/Footboard
Panel (headboard side view)
(1) Left
Panel
(1) Right
Panel
BENCH PARTS
AC
G
I
E
H
(1) Seat Panel
(2) Headboard/Footboard
Panel
(1) Left
Panel
(1) Right
Panel
BENCH PARTS
G
I
E
H
(1) Side Panel Extender
(2) Headboard/Footboard
Panel Left Extender
(2) Headboard/Footboard
Panel Right Extender
(2) Canopy Pole Top
(1) Canopy Pole Base Left
B D F
J
K
(1) Canopy Pole Base Right
L
(2) Canopy Pole Top
(1) Canopy Pole Base Left
J
K
(1) Canopy Pole Base Right
L
Toddler Bed Parts: HARDWARE SET FOUND IN TODDLER BED BOX
Twin Bed Parts: HARDWARE SET FOUND IN TWIN BED BOX
8 x 1.5” Length
16 x 1” Length
8 x 1.5” Length
28 x 1” Length
8 x .5” DIA.
8 x .5” DIA.
TO FULLY ASSEMBLE THE
TODDLER BED YOU WILL NEED
TO FULLY ASSEMBLE THE TWIN BED
YOU WILL NEED
4 x .5” DIA.
4 x .5” DIA.
M
S
N
(1) Fabric Bin
(2) Support Straps
(1) Fabric Bin Base
MN
(1) Fabric Bin (1) Fabric Bin Base
(2) Side Panel Female (2) Side Panel Male
AC
S
(2) Support Straps

3
Stickers
• Please apply all stickers on individual parts before assembly.
• For best results, place individual parts on a flat surface before applying stickers and acrylic jewels.
(24) (2)
(1) (1) (1)
(2) (2) (2)
(2)(1) (4 Jewels) (12)
A2
A1 B1 B2
E1
E4
E2 E3
C1
C2
A3 C3 D1 E7 F1 E5 E5
E6

4
Canopy Drapings
(1 Left Side Draping)
(1 Twin Center Draping)
(1 Toddler Center Draping)
(1 Right Side Draping)
O R
P
Q

5
A C
B
D
E
F
D
E
F
A1
A3
A2
D1
D1
D1
D1
F1
F1
F1
F1
E4
E1
E7
E5 E6
E5 E6
E7
E7 E7
E3
E2
C3
C2
C1
B1 B2
Alternate Headboard Decal
1 Apply all decals
A2 x 6 C2 x 6
E5 x 2
E5 x 2

6
2 Assemble Bench
2C
2A 2B
2D
• Align seat with slots in bench sides
• Slide into place
• Make sure seat is all the
way to the front and
screwholes on sides line up
• Turn flap down so it
sits flat across the
back of the seat.
G
I
H
4 x 1”

7
12
A
C
• Insert Panel C into Panel A for both sides
• Insert Panel E latch hooks into both left/right
side panel grooves
• Slide downward into a fully locked position
3A
3B
3C
3D
3 Toddler Bed Assembly
E
E
4 x 1.5”
4 x 1”

8
3E
3F 3G
3H 3I
• Align pole top
with pole base
• Align pole base with slots in
side panels on back of headboard
• Slide into place until poles are flush with sides
J
K
L
4 x .5”
4 x 1”
4 x 1.5”
4 x .5”

9
3J 3K
• Align bench to footboard (Panel E)

10
3M3L
•Align screwtab openings on straps to screwholes in sides
• Use screws and washers to securely attach straps to both sides
• Use these screw tabs for toddler bed setup 4 x 1”
4 x .5”