Delta Children 208220 User manual

www.DeltaChildren.com
Customer Experience Center
phone: [phone]
email: [email protected]
Readall instructions BEFORE assembly and USE of product
KEEP INSTRUCTIONS FOR FUTURE USE.
208220, 208220W
Chair/Sofa
Slipcover
AAngled
Lounger Foam (2)
BBase
Foam
DChair/Sofa
Back Foam
E
Side Arm
Foam (2)
C
TO OPEN OR REMOVE COVER
• Locate Childproof Closure from underneath the Convertible Chair/Sofa
• Use paper clip to insert through Childproof Closure hole
• Zip/Unzip all the way and removed paper clip from Childproof Closure hole
OPENING/CLOSING CHAIR/SOFA SLIPCOVER
CHAIR/SOFA FOAM ASSEMBLY
STUFFING THE CHAIR/SOFA SILPCOVER
• Place cover down with the front facing up and away
A
PARTS
Convertible
Chair/Sofa
Instruction
Manual:
208220, 208220W
Please read the following instructions and warnings carefully. KEEP THIS INSTRUCTION MANUAL FOR
FUTURE REFERENCE. DO NOT use this product if it is damaged or broken.
WARNING:
• FOR CHILDREN AGES
18 MONTHS AND UP.
• Suffocation Hazard!
• NEVER use with infants who cannot
sit up or get in and out of the
product unassisted
• Child can roll over and get head and
face entrapped against soft side of
product and suffocate

© 2020 Delta Children’s Products Corp.
114 West 26
th
Street
New York, NY 10001
www.DeltaChildren.com
Customer Experience Center
[phone]
email: [email protected]
Please retain information for future reference.
Colors and styles may vary.
MADE IN CHINA.
6/2020
CHAIR/SOFA FOAM ASSEMBLY (CONTINUED)
CHAIR/SOFA TO LOUNGER
B
D
E
C
B
B
B
B
C
CHAIR/SOFA FOAM LAYOUT
• Parts are numbered in order of assembly
BACK REST
• Back rest has an angle
that faces to the inside
ARMS
• Arms are identical sizes
• Arms sits angle slope forward
GAP
• Important that the angled
pieces leave gap at the bottom
CARE INSTRUCTIONS:
Cold Water, Gentle Cycle, NO BLEACH, NO IRONING
Regular Detergent, Tumble Dry Low Heat or Air Dry
cold, gentle cycle
1
2
3
5
6
4
123
START WITH:
(B) Angled Lounger Foam
• Angle pieces orientation is key to proper folding
• Important that the angled pieces leave gap at the bottom
1
NEXT:
Insert (B) Angled Lounger Foam
• Angle pieces orientation is key to proper folding
• Important that the angled pieces leave gap at the bottom
2
NEXT:
Insert (C) Side Arm Foam
• Arms sits angle slope forward
3
NEXT:
Insert (E) Chair Back Foam
Back rest has an angle that faces to the inside
5
NEXT:
Insert (D) Base Foam
6
FINISH BY:
• Zipping all the way and removed paper clip
from Childproof Closure hole
7
NEXT:
Insert (C) Side Arm Foam
• Arms sits angle slope forward
4