Delta Childrens Products 2502X-XXX SBBV10 User manual

Model # 2502X-XXX SBBV10
SWEET BEGININGS BASSINET
www.DeltaChildrensProducts.com
DCP Cat # 10-09-12-V10
Customer Care Tel. [phone] (J)
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
Styles and colors may vary
IMPORTANT: Read all instructions before assembly and use of the product
Keep the instructions for future reference
Required Tools: Screwdriver (not included)

2
Failure to follow these warnings and the instructions could result in serious injury or death.
• Read all instructions before assembling unit.
KEEP INSTRUCTIONS FOR FUTURE USE.
DO NOT USE THIS UNIT IF THE INSTRUCTIONS CANNOT BE STRICTLY FOLLOWED.
• Before each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or
torn mesh/fabric. Check before assembly and periodically during use. Contact Delta Children’s Product
Costumer Service Department at 1-800-377-3777 (8:00am ~ 4:30pm PST) for replacement
parts, repair or instructions.
• DO NOT substitute parts.
• FALL HAZARD—To help prevent falls, DO NOT use this product when the infant begins to push up on
hands and knees or has reached manufacturer’s recommended maximum weight of 15lbs. (6.8kg),
whichever comes first.
• Use bassinet with only one child at a time.
• Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a product or attach strings to toys.
• SUFFOCATION HAZARD: Infants can suffocate:
• In gaps between an extra pad and side of the bassinet/cradle.
• On soft bedding.
• Use ONLY the pad provided by the manufacturer. NEVER add a pillow, comforter or another mattress for
padding.
• If a sheet is used with the pad, use only the one provided by the manufacturer or one specifically
designed to fit the dimensions of the bassinet/cradle.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep,
unless otherwise advised by your physician.
• Never use plastic shipping bags or other plastic film as a mattress covers not sold and intended for
that purpose. They can cause suffocation.
• DO NOT place bassinet near a window where cords from blinds or drapes may strangle a child.
Child may fall out of window.
• DO NOT place cords, straps or similar items that could become wound around a child’s neck in or
near the bassinet.
CARE AND MAINTENANCE
Check bassinet for worn parts, torn material or stitching periodically. Replace or repair the
parts as needed. Use Delta replacement parts.
Consumer Information
WARNING
Manufactured for and distributed by:
114 West 26th Street, New York, NY 10001
Customer Service
Tel. [phone]
www.DeltaChildrensProducts.com
[email protected]
MADE IN CHINA

3
Canopy
Mattress Support Top Rail FrameStorage Basket
Caster (X2)
Locking Caster (X2)
Support Legs
(2 X A / 2 X B)
Basket Support Tubes
Bassinet Fabric Cover Mattress Pad
Parts
IMPORTANT! Please remove all parts from the package and identify them before assembly.
Customer Service Tel. [phone] www.DeltaChildrensProducts.com
A
B
Music Module
Shown Actual Size
M6 Screw – 4
M4 Screw – 8
*(On Some models 25021, 25022)

4
Bassinet Assembly
• Locate four (4) support legs and four (4) casters.
• Insert casters into the bottom of the support leg and push caster in
until you hear it “clicks” into place.
• Pull on the caster to assure it is properly locked in place.
• Repeat for other three (3) support legs and casters.
• Locate the top rail frame.
• Lay the top rail frame on the floor with the support leg inserts facing up.
• Locate the four (4) support legs.
• Identify support legs labeled “A” and “B”.
• Align leg “A” with leg support insert “A”.
• Insert the support leg into the support leg insert and push the leg down
until you hear it “click” into the locked position.
• Repeat for other support leg “A” and two support legs “B”.
• Make sure all plastic mattress board supports are facing inward.
• Confirm that all four support legs have been properly inserted into the
support leg inserts as shown above.
• Pull upon all support legs to assure they are properly locked to the top
frame.
3
4
Locked!
A
Customer Service Tel. [phone] www.DeltaChildrensProducts.com
1
Support Leg Insert
2
Locked!
Plastic mattress
board supports
• Locate the mattress board and eight (8) M4 screws.
• Place the mattress board into the frame lining up the four through
holes with the plastic mattress board support nuts.
• Using a screw driver and four (4) M4 screws, tighten the
mattress board onto the plastic mattress board supports.
• Repeat this procedure for the four (4) remaining screw holes.
5
Mattress Board

5
Bassinet Assembly
• Locate the storage basket.
• With the bottom of the storage basket facing up insert the basket
support tubes into the storage basket sleeves.
• Turn frame over into the up right position.
• Locate remaining two (2) M6 screws.
• Using the screw driver and M6 screw, tighten the screw to the basket
support tube.
• Repeat this procedure for second basket support tube.
7
8
9
Customer Service Tel. [phone] www.DeltaChildrensProducts.com
• Locate the two (2) basket support tubes.
• Insert and fasten only one side of the two support tubes with M6 x 4cm
screws through the holes in the legs and basket support tubes.
• Repeat the same producer for second basket support tube.
Basket Support Tube
6

6
Attaching Music Module (On Some Models)
• To attach Music Module, remove screw plate in Music Module.
• If your bassinet model does not have a music module, skip these steps.
1
• Plug battery power line on underside of mattress support to Music
Module.
3
Customer Service Tel. [phone] www.DeltaChildrensProducts.com
Battery Safety Information (On Some Models)
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: Alkaline, standard (carbon zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

7
Music Module Operation (On Some Models)
Vibration
Bassinet Light
Music
Volume
Adjustment
ON/OFF
Activation Switch
Vibration
Adjustment
• To turn music box “ON,” move ON/OFF ACTIVATION SWITCH to “ON.”
NOTE: On some models
• Activate BASSINET LIGHT by pressing BASSINET LIGHT button.
NOTE: Light will stay on in 5-minute cycles, unless button is pressed before 5 minutes are up.
• Press VIBRATION button to activate VIBRATION. The strength can be adjusted with VIBRATION
ADJUSTMENT knob on left.
NOTE: Vibration will stay on in 5-minute cycles, unless button is pressed before 5 minutes are up.
NOTE: On some models
• Press MUSIC button to activate MUSIC. Press button multiple times to cycle through two (2) modes of
music; one to musical chimes and back to “OFF.” VOLUME can be adjusted with VOLUME ADJUSTMENT
knob on right.
• To turn music box “OFF,” move ON/OFF ACTIVATION SWITCH to “OFF”.
Customer Service Tel. [phone] www.DeltaChildrensProducts.com
• Position Music Module onto mattress support frame and reattach screw
plate.
VOICE
2
• Locate battery Compartment on underside of Mattress Support. Loosen
screws in Battery Compartment with Phillips Head screwdriver (sup-
plied)
• Lift to remove door. Insert four (4) “AA” alkaline batteries.
• Replace door and tighten screws.
HINT: We recommend using alkaline batteries for longer battery life.
4
Loosen screws

8
Bassinet Assembly
• Place the sheet over the mattress pad.
Mattress Pad with Sheet
2
• Lift the skirt on the liner. Snap all 4 straps around the top of the side of
the frame.
• Repeat this procedure to snap the other 4 straps around the top of the
frame.
3
Place Sheet on Mattress Pad
• Please place the mattress pad with sheet inside the bassinet for the
saftey and comfort of your baby.
1
Customer Service Tel. [phone] www.DeltaChildrensProducts.com
• Place the liner onto frame. Make sure warning label is centered
at the end of bassinet.
1
• Stretch the pockets on the bottom of the liner around the ends of the
mattress support.
2
Mattress
Support
Fabric
Snaps
Pocket
Mattress
Support
Snaps
Snaps
Mattress Support

9
To Attach Hood
• Fasten the hook and loop on each canopy flap to the side of the
bassinet liner.
•Hint: For best result , make sure elastic is even across the back of
the bassinet.
24
• Position the canopy over the top end of the bassinet opposite the
warning label.
• Open the hole on the liner and push aside foam to expose metal.
• Push the canopy ratchet onto the frame on both sides of the bassinet.
• Pull bottom back side of canopy over the bassinet top rail.
13
Canopy
Ratchet
Frame
Hook And Loop
Hook And Loop

10
Notes
Customer Service Tel. [phone] www.DeltaChildrensProducts.com

11
Notes
Customer Service Tel. [phone] www.DeltaChildrensProducts.com

12
Manufactured for and distributed by:
114 West 26th Street, New York, NY 10001
Customer Service
Tel. [phone]
www.DeltaChildrensProducts.com
customerser[email protected]
MADE IN CHINA