Delta Childrens Products 74103 Series User manual

DEC 23,2010 21462-R1 ©2010 DELTA ENTERPRISE CORP.
STYLE No: 74103-
COLOR FACTORY
REV
A
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
To register your product for important safety alerts and updates to your product
please visit www.deltachildrensproducts.com and click on Product Registration.
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS
DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
READ ALL INSTRUCTIONS BEFORE
ASSEMBLY AND USE.
KEEP INSTRUCTIONS FOR FUTURE USE.
Consumer Care:
www.deltachildrensproducts.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
When contacting Delta Consumer Care you
will need to reference the above number.
NEWPORT 3DRAWER CHEST

2
PARTS: HARDWARE KITS PART #21463
C. CRESCENT WASHER x10
ALLEN WRENCH
A. 45mm Bolt x14 B. 28mm Bolt x4
D. WOOD DOWEL x28 E. KNOB SCREW x7 F. SCREW x16 H. DRAWER SCREW x27
PHILLIPS SCREWDRIVER
NOT INCLUDED
WARNING:
Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:
.Place heaviest items in the lowest drawers.
.Unless specifically designed to accommodate, do not set TV’s or other heavy objects on the top of this
product.
.Never allow children to climb or hang on drawers, doors,or shelves.
.Never open more than one drawer at a time.
Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
.Always monitor your child’s activity when in the nursery.
.Do not allow standing in drawers.
.Do not allow standing on top of this product.
.Accessory Items must be securely fastened to this product according to the instructions provided with
those items.
.To avoid head injury, do not allow children to play underneath open drawers.
.Do not leave drawers open when not in use.
NOTES ON ASSEMBLY:
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on
the diagram of the item which is drawn actual size and design. Be sure to use the proper size and
shape specified in the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly
recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.
NOTES ON CARE AND MAINTENANCE:
- Do not scratch or chip the finish.
- Inspect the product periodically, contact delta children's products for replacement parts or questions.
- Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a
damp, cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or
felt pad under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.
G. KNOB x7
Part# 21445

PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT.
3
J. Left side
Part# 21446
K. Right side
Part# 21447
T. Drawer rail x2
Part# 21453
N. Top front rail x1
Part# 21450
R. Bottom front rail x1
Part# 21452
M. Top back rail x1
Part# 21449
L. Top panel x1
Part# 21448
P. Bottom back panel x1
Part# 21451
U. Back panel x1
Part# 21454
BB. Drawer front x2
Part# 21456
AA. Drawer front-Vein line x1
Part# 21455
EE. Drawer left side x3
Part# 21459
DD. Drawer right side x3
Part# 21458
CC. Drawer back x3
Part# 21457
FF. Drawer bottom x3
Part# 21460
GG. Drawer support x3
Part# 21461z

HARDWARE SYSTEM - REVIEW BEFORE ASSEMBLY
4
C. CRESCENT
WASHER
A. 45mm Bolt
INSERT THE DOWELS IN THE RAIL
INTO THE HOLES IN THE E POST.
INSERT THE BOLT INTO THE SLOT. TURN
CLOCKWISE WITH FINGERS OR THE ALLEN
WRENCH PROVIDED. DO NOT FULLY
TIGHTEN, LEAVE 1/2” (12mm) EXPOSED.
SLIDE THE CRESCENT WASHER OVER THE
EXPOSED BOLT, BEHIND THE HEAD OF THE
BOLT. TIGHTEN THE BOLT WITH THE ALLEN
WRENCH PROVIDED.
INSTALL (1) BOLT AND (1) CRESCENT WASHER
AT A TIME. TIGHTEN UNTIL IT LOOKS LIKE THE
PICTURE.

STEP 1:
5
STEP 2:
D. WOOD DOWEL x28
A. 45mm Bolt x5
DD
JK
D
R
N
T
M
P
D
ATTACH THE TOP FRONT RAIL (PART N),
DRAWER RAIL (PART T), BOTTOM FRONT RAIL
(PART R), BACK TOP RAIL (PART M), BOTTOM
BACK PANEL (PART P). ENSURE ALL DOWELS
ARE ALIGNED BEFORE ANY BOTL. USING (10)
BOLT (PART A) AND (10) CRESCENT WASHER
(PART C). FOLLOW DIRECTION ON PAGE 4,
THEN INSTALL SHORT BOLTS. TIGHTEN ALL
BOLTS WITH THE ALLEN WRENCH.
R
NT
M
P
T
C. CRESCENT
WASHER x5

STEP 3:
6
STEP 4:
C. CRESCENT
WASHER x5
B. 28mm Bolt x4
A. 45mm Bolt x4
K
ATTACH THE RIGHT SIDE (PART K) TO THE
ASSEMBLY FROM STEP 2. ENSURE ALL DOWELS
ARE ALIGNED BEFORE ANY BOTL. USING (6)
BOLT (PART A) AND (6) CRESCENT WASHER
(PART C). FOLLOW DIRECTION ON PAGE 4,
THEN INSTALL SHORT BOLTS. TIGHTEN ALL
BOLTS WITH THE ALLEN WRENCH.
ATTACHED THE TOP PANEL (PART L) TO
THE BASE OF THE CASE FROM STEP 3.
ENSURE ALL DOWELS ARE ALIGNED
BEFORE INSTALLING ANY BOLTS.
INSTALL (4) BOLTS (PART A) THROUGH
THE TOP FRONT AND BACK RAILS,
THEN INSTALL (4) BOLTS (PART B)
THROUGH THE SIDE. TIGHTEN ALL
BOLTS WITH THE ALLEN WRENCH.
L
A
A
B
B
A. 45mm Bolt x5

STEP 5:
7
F. SCREW x16
U
F
ATTACH BACK PANEL (PART U)
USING (16) SCREWS (PART F).
TIGHTEN WITH A PHILLIPS
SCREWDRIVER.

STEP 6:
8
GG
FF
H
SLIDE DRAWER BOTTOM (PART GG)
INTO THE GROOVES. INSTALL THE
DRAWER SUPPORT (PART FF) USING
ON DRAWER SCREW (PART H)
CC
EE
DD
H
H
AA, BB
H
H
ATTACH THE RIGHT AND LEFT
DRAWER SIDES (PART DD AND
EE) TO THE DRAWER BACK (PART
CC) WITH (4) DRAWER SCREWS
(PART H). NOTE: GROOVES IN
BOTTOM MUST ALIGN TIGHTEN
WITH PHILLIPS SCREWDRIVER
ATTACH THE DRAWER FRONT (PART
AA, BB). USING (4) DRAWER
SCREWS (PART H). BE SURE THE
BOTTOM PANEL IS IN THE GROOVE.
TIGHTEN WITH THE PHILLIPS
SCREWDRIVER.
H. DRAWER SCREW x36

STEP 6: CONTINUED
9
STEP 8:
G
E
G. X7
4X
ATTACH (2) KNOBS (PART G)
WITH (2) KNOB SCREWS (PART
E). TIGHTEN WITH THE PHILLIPS
INSTALL DRAWERS. REARRANGING THE
DRAWERS MAY RESULT IN A BETTER FIT
OR ALIGNMENT.
E. KNOB SCREW x7

STYLE No: 74103-
COLOR FACTORY
REV
A
Warranty: This Delta Case is warranted to be free from defects for
a period of 90 days from the date of purchase under normal use.
This warranty extends only to the original retail purchaser and is valid
only when supplied with proof of purchase, or if received as a gift,
when the registration is on file with Delta.
Consumer Care:
www.deltachildrensproducts.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Please visit www.deltachildrensproducts.com and click on Product Registration to
register your product for important safety alerts and updates.
For questions or comments, please log on to www.deltachildrensproducts.com and
click Consumer Care, or contact us by phone at [phone].
In the event that you need to contact our Consumer Care department please have the
Style Number and Lot Number available. If they are not printed below they can be found
on the label on the Back panel.
Use the space below to make note of those numbers.
Lot No. : _______________________
Pack Date:_____________________
Date of Purchase: _____________ (you should also keep your receipt)