Delta Tau Turbo PMAC2 PCI Ultralite Quick user guide

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

^1HARDWARE REFERENCE MANUAL
^2 TURBO PMAC2 PCI ULTRALITE
^3 Programmable Multi-Axis Controller
^4 4AX-603726-XHXX
^5 December 12, 2011
Single Source Machine Control Power // Flexibility // Ease of Use
21314 Lassen Street Chatsworth, CA 91311 // Tel. [phone] Fax. [phone]//www.deltatau.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Copyright Information
© 2011 Delta Tau Data Systems, Inc. All rights reserved.
This document is furnished for the customers of Delta Tau Data Systems, Inc. Other uses are
unauthorized without written permission of Delta Tau Data Systems, Inc. Information contained in this
manual may be updated from time-to-time due to product improvements, etc., and may not conform in
every respect to former issues.
To report errors or inconsistencies, call or email:
Delta Tau Data Systems, Inc. Technical Support
Phone: [phone]
Fax: [phone]
Email: [email protected]
Web: www.deltatau.com
Operating Conditions
All Delta Tau Data Systems, Inc. motion controller, accessory, and amplifier products contain static
sensitive components that can be damaged by incorrect handling. When installing or handling Delta Tau
Data Systems, Inc. products, avoid contact with highly insulated materials. Only qualified personnel
should be allowed to handle this equipment.
In the case of industrial applications, we expect our products to be protected from hazardous or
conductive materials and/or environments that could cause harm to the controller by damaging
components or causing electrical shorts. When our products are used in an industrial environment, install
them into an industrial electrical cabinet to protect them from excessive or corrosive moisture, abnormal
ambient temperatures, and conductive materials. If Delta Tau Data Systems, Inc. products are directly
exposed to hazardous or conductive materials and/or environments, we cannot guarantee their operation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Safety Instructions
Qualified personnel must transport, assemble, install, and maintain this equipment. Properly qualified
personnel are persons who are familiar with the transport, assembly, installation, and operation of
equipment. The qualified personnel must know and observe the following standards and regulations:
IEC364resp.CENELEC HD 384 or DIN VDE 0100
IEC report 664 or DIN VDE 0110
National regulations for safety and accident prevention or VBG 4
Incorrect handling of products can result in injury and damage to persons and machinery. Strictly adhere
to the installation instructions. Electrical safety is provided through a low-resistance earth connection. It
is vital to ensure that all system components are connected to earth ground.
This product contains components that are sensitive to static electricity and can be damaged by incorrect
handling. Avoid contact with high insulating materials (artificial fabrics, plastic film, etc.). Place the
product on a conductive surface. Discharge any possible static electricity build-up by touching an
unpainted, metal, grounded surface before touching the equipment.
Keep all covers and cabinet doors shut during operation. Be aware that during operation, the product may
have electrically-charged components and hot surfaces. Control and power cables can carry a high
voltage, even when the motor is not rotating. Never disconnect or connect the product while the power
source is energized to avoid electric arcing.
WARNING
A Warning identifies hazards that could result in personal injury
or death. It precedes the discussion of interest.
Caution
A Caution identifies hazards that could result in equipment damage. It
precedes the discussion of interest.
Note
A Note identifies information critical to the user’s understanding or
use of the equipment. It follows the discussion of interest.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
MANUAL REVISION HISTORY
REV
DESCRIPTION
DATE
CHANGE
APPROVED
1
MANUAL CREATION
6/23/08
CP
JP
2
CORRECTED MACRO IC OPTIONS
9/12/11
SM
RN
3
UPDATED CPU OPTIONS
REFURBISHED MANUAL
12/12/11
RN
RN
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Table of Contents
Table Of Contents
INTRODUCTION................................................................................................................................................1
SPECIFICATIONS..............................................................................................................................................2
Part Number And Options....................................................................................................................2
Environmental Specifications ..............................................................................................................3
Electrical Specifications ......................................................................................................................3
CONENCTOR PINOUTS....................................................................................................................................4
J1: (JANA) Analog Inputs ...................................................................................................................4
J2: (JTHW) Multiplexer Port ...............................................................................................................5
J3: (JI/O) General Purpose Inputs And Outputs....................................................................................6
J5: (RS-232) Serial Port.......................................................................................................................7
J5A: RS-422 Auxiliary Serial Port......................................................................................................8
J6: (JDISP) Display Connector ...........................................................................................................9
J7: (JHW) Handwheel Encoder Connector.........................................................................................10
TB1: Logic Power .............................................................................................................................11
TB2: Watchdog Relay .......................................................................................................................11
MACRO Interface Connectors...........................................................................................................12
E-POINT JUMPERS..........................................................................................................................................13
E-Point Jumpers on-board Location...................................................................................................13
E0: Reset Lock Enable......................................................................................................................14
E1: Card 0 (Clock Direction) Select..................................................................................................14
E2: 40/60 MHz Operation.................................................................................................................14
E3: Re-Initialization on Reset Control...............................................................................................14
E4-E6: (Reserved for Future Use).....................................................................................................14
E7: Analog Input Reference Select....................................................................................................15
E10A, B, C: Flash Memory Bank Select ...........................................................................................15
E15: Internal/External MACRO Electrical Select..............................................................................15
E16: Electrical/Optical MACRO Input Select ...................................................................................15
E17 –E18: Serial Port Select............................................................................................................16
E19: Watchdog Disable Jumper ........................................................................................................16
E20 –E22: Power-Up/Reset Load Source.........................................................................................16
E23: Firmware Reload Enable ..........................................................................................................16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Introduction 1
INTRODUCTION
The Turbo PMAC2 PCI Ultralite is a member of the Turbo PMAC family of boards optimized for
interface to the system through the MACRO ring and therefore does not contain on-board axis interface
circuitry (which is what makes it Ultralite). It can command up to 32 axes through the MACRO ring. It
can also support up to 32 channels of off-board axis interface circuitry through its expansion port,
connected to ACC-24P or ACC-24P2 boards.
The Turbo PMAC2 PCI Ultralite is a full-sized PCI-bus expansion card. This card is capable of PCI bus
communications, with or without the optional dual-ported RAM. Standalone operation is also possible
and communications can be done through RS-232, RS-422.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Specifications 2
SPECIFICATIONS
Part Number And Options
The following is a summary of the part number and options available for the Turbo PMAC2 PCI Ultralite:
4 - 3 7 2 6 - 2 - 0
0 - No Options
1- Opt. 12
8-channels 12-bit
A/D converter
2- Opt. 12 & 12A
16-channels 12-bit
A/D converter
0
Turbo PMAC2 PCI Ultralite
Communication Options
Other Options
2 - Opt. A (Standard)
MACRO-ring
fiber optic interface
3 - Opt. C
MACRO-ring
RJ-45 electrical interf.
4 - Opt. A & Opt. 9T
MACRO-ring
fiber optic interface
&
Auxiliary RS-232
5 - Opt. C & Opt. 9T
MACRO-ring
RJ-45 electrical interf.
&
Auxiliary RS-232
C F H
A
F
H
0 - No Options
1 - Opt. 2B
Dual Port RAM
E
Axis / MACRO Node Options
2 –Opt. 1A 8 servo, 6 I/O
and 2 communic. Nodes
(Standard)
3 –Opt. 1B 16 servo, 12 I/O
and 4 communic. nodes
4 –Opt. 1C 24 servo, 18 I/O
and 6 communic. nodes
5 –Opt. 1D 32 servo, 24 I/O
and 8 communic. nodes
G
G
C0 - Opt. 5C0 80MHz
DSP56303 CPU
256Kx24 SRAM
1Mx8 flash*
C3 - Opt. 5C3 80MHz
DSP56303 CPU
1Mx24 SRAM
4Mx8 flash*
E0 - Opt. 5E0 160MHz
DSP56311 CPU
256Kx24 SRAM
1Mx8 flash*
E3 - Opt. 5E3 160MHz
DSP56311 CPU
1Mx24 SRAM
4Mx8 flash*
F0 - Opt. 5F0 240MHz
DSP56321 CPU
256Kx24 SRAM
1Mx8 flash*
F3 - Opt. 5F3 240MHz
DSP56321 CPU
1Mx24 SRAM
4Mx8 flash*
E
CPU / Memory / Firmware
Options
C
2 - PMAC2 (Standard)*
D
D
Other CPU Options
3- No Options
5- Opt. 8A
High-accuracy
clock crystal
6- Opt. 16A
Battery-backed
Parameter RAM
7- Opt. 8A & Opt. 16A
High-accuracy
clock crystal
&
Battery-backed
Parameter RAM
A B
B
LK
00 - No Additional* Options
xx - Factory assigned digits
for Additional* Options
KL
Factory Assigned Options
* If Opt. 10xx (specific firmware version) or any other Additional Option is required,
contact factory for digits K and L (Factory Assigned digits). If Opt. 10xx is not
ordered the latest firmware is used.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Specifications 3
Environmental Specifications
Description
Specification
Operating Temperature
0°C -- 60°C
32°F -- 140°F
Storage Temperature
12°C -- 82°C
10°F -- 180°F
Humidity
10% -- 95%, non-condensing
Electrical Specifications
Description
Specification
Input Power
~2A @ +5V
~100 mA @ ±12V
Battery
3.0 V Lithium Cell, 1200 mAh, 2/3 A-size
Or 3.6V Lithium Cell, 1000 mAh, 1.00” can
Note
Expected battery life is about 10 years with standard CPU options
(5Cx). Faster CPU speed options (5Ex, and 5Fx) do tend to drain the
battery faster, depending on the application demands.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 4
CONENCTOR PINOUTS
J1: (JANA) Analog Inputs
The J1 (JANA) port provides optional eight or sixteen single-ended 12-bit analog inputs, using the
traditional Option 12. These analog inputs can be used either in unipolar mode in the 0V to +5V range, or
bipolar mode in the -2.5V to +2.5V range. Each input has a 470Ω input resistor in-line, and a 0.01 μF
resistor to ground ensuing a 4.7 μsec time constant per input line.
J1: 20-pin IDC header (M)
Mating: 20-pin IDC header (F)
Front view
135791113151719
2468101214161820
Pin #
Symbol
Function
Description
Notes
1
ANAI00
Input
Analog Input 1
0-5V or ± 2.5V input range
2
ANAI01
Input
Analog Input 2
0-5V or ± 2.5V input range
3
ANAI02
Input
Analog Input 3
0-5V or ± 2.5V input range
4
ANAI03
Input
Analog Input 4
0-5V or ± 2.5V input range
5
ANAI04
Input
Analog Input 5
0-5V or ± 2.5V input range
6
ANAI05
Input
Analog Input 6
0-5V or ± 2.5V input range
7
ANAI06
Input
Analog Input 7
0-5V or ± 2.5V input range
8
ANAI07
Input
Analog Input 8
0-5V or ± 2.5V input range
9
ANAI08
Input
Analog Input 9
0-5V or ± 2.5V input range
10
ANAI09
Input
Analog Input 10
0-5V or ± 2.5V input range
11
ANAI10
Input
Analog Input 11
0-5V or ± 2.5V input range
12
ANAI11
Input
Analog Input 12
0-5V or ± 2.5V input range
13
ANAI12
Input
Analog Input 13
0-5V or ± 2.5V input range
14
ANAI13
Input
Analog Input 14
0-5V or ± 2.5V input range
15
ANAI14
Input
Analog Input 15
0-5V or ± 2.5V input range
16
ANAI15
Input
Analog Input 16
0-5V or ± 2.5V input range
17
GND
Common
Tied to digital ground
18
+12V
Output
Reference
Reference voltage
19
GND
Common
Tied to digital ground
20
-12V
Output
Reference
Reference voltage
Using the J1 (JANA) analog inputs, the user should see:
Unipolar
Bipolar
Input Voltage [VDC]
Software Counts
Input Voltage [VDC]
Software Counts
0
0
-2.5
-2048
+2.5
+2048
0
0
+5
+4096
+2.5
+2048
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 5
J2: (JTHW) Multiplexer Port
The J2 (JTHW) multiplexer port provides eight inputs and eight outputs at TTL levels. Typically these are
used to create multiplexed I/O with accessory boards such as ACC-34 (Discrete I/O), to Opto-22 or
similar hardware. J2 inputs/outputs may also be used directly as non-multiplexed discrete digital I/Os.
J2: 26-pin IDC header (M)
Mating: 26-pin IDC header (F)
Front view
135791113151719
2468101214161820
2123
2224
25
26
Pin#
Symbol
Function
Description
Notes
1
GND
Common Ground
Tied to digital ground
2
GND
Common Ground
Tied to digital ground
3
DAT0
Input
Data-0 Input
Data input from MUX port accessories
4
SEL0
Output
Select0 Output
Address/data output for MUX port accessories
5
DAT1
Input
Data1 Input
Data input from MUX port accessories
6
SEL1
Output
Select1 Output
Address/data output for MUX port accessories
7
DAT2
Input
Data2 Input
Data input from MUX port accessories
8
SEL2
Output
Select2 Output
Address/data output for MUX port accessories
9
DAT3
Input
Data3 Input
Data input from MUX port accessories
10
SEL3
Output
Select3 Output
Address/data output for MUX port accessories
11
DAT4
Input
Data4 Input
Data input from MUX port accessories
12
SEL4
Output
Select4 Output
Address/data output for MUX port accessories
13
DAT5
Input
Data5 Input
Data input from MUX port accessories
14
SEL5
Output
Select5 Output
Address/data output for MUX port accessories
15
DAT6
Input
Data6 Input
Data input from MUX port accessories
16
SEL6
Output
Select6 Output
Address/data output for MUX port accessories
17
DAT7
Input
Data7 Input
Data input from MUX port accessories
18
SEL7
Output
Select7 Output
Address/data output for MUX port accessories
19
N.C.
N.C.
Not connected
20
GND
Common Ground
Tied to digital ground
21
BRLD/
Output
Buffer Request
Low is Buffer Request
22
GND
Common Ground
Tied to digital ground
23
IPLD/
Output
In Position
Low is In Position
24
GND
Common Ground
Tied to digital ground
25
+5V
Output
Reference
Power supply out
26
INIT/
Input
PMAC Reset
Low is Reset
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 6
J3: (JI/O) General Purpose Inputs And Outputs
The J3 (JI/O) connector provides 32 input/output pins at TTL 5V levels, direction controlled in software
in byte-wide groups.
J3: 40-pin IDC header (M)
Mating: 40-pin IDC header (F)
Front view
135791113151719
2468101214161820
2123
2224
25
26
27293133
28303234
3537
3638
39
40
Pin#
Symbol
Function
Description
Notes
1
I/O00
In/Out
Digital I/O 1
Software direction control.
2
I/O01
In/Out
Digital I/O 2
Software direction control.
3
I/O02
In/Out
Digital I/O 3
Software direction control.
4
I/O03
In/Out
Digital I/O 4
Software direction control.
5
I/O04
In/Out
Digital I/O 5
Software direction control.
6
I/O05
In/Out
Digital I/O 6
Software direction control.
7
I/O06
In/Out
Digital I/O 7
Software direction control.
8
I/O07
In/Out
Digital I/O 8
Software direction control.
9
I/O08
In/Out
Digital I/O 9
Software direction control.
10
I/O09
In/Out
Digital I/O 10
Software direction control.
11
I/O10
In/Out
Digital I/O 11
Software direction control.
12
I/O11
In/Out
Digital I/O 12
Software direction control.
13
I/O12
In/Out
Digital I/O 13
Software direction control.
14
I/O13
In/Out
Digital I/O 14
Software direction control.
15
I/O14
In/Out
Digital I/O 15
Software direction control.
16
I/O15
In/Out
Digital I/O 16
Software direction control.
17
I/O16
In/Out
Digital I/O 17
Software direction control.
18
I/O17
In/Out
Digital I/O 18
Software direction control.
19
I/O18
In/Out
Digital I/O 19
Software direction control.
20
I/O19
In/Out
Digital I/O 20
Software direction control.
21
I/O20
In/Out
Digital I/O 21
Software direction control.
22
I/O21
In/Out
Digital I/O 22
Software direction control.
23
I/O22
In/Out
Digital I/O 23
Software direction control.
24
I/O23
In/Out
Digital I/O 24
Software direction control.
25
I/O24
In/Out
Digital I/O 25
Software direction control.
26
I/O25
In/Out
Digital I/O 26
Software direction control.
27
I/O26
In/Out
Digital I/O 27
Software direction control.
28
I/O27
In/Out
Digital I/O 28
Software direction control.
29
I/O28
In/Out
Digital I/O 29
Software direction control.
30
I/O29
In/Out
Digital I/O 30
Software direction control.
31
I/O30
In/Out
Digital I/O 31
Software direction control.
32
I/O31
In/Out
Digital I/O 32
Software direction control.
33
GND
Common Ground
Tied to digital ground
34
GND
Common Ground
Tied to digital ground
35
PHASE/
Output
Phase Clock
For latching data
36
SERVO/
Output
Servo Clock
For latching data
37
GND
Common Ground
Tied to digital ground
38
GND
Common Ground
Tied to digital ground
39
+5V
Output
Reference
40
+5V
Output
Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 7
J5: (RS-232) Serial Port
The J5 (RS-232) connector can be used as a primary communication mean or employed as a secondary
port that allows simultaneous communication alongside PCI.
J5 can also be used to share phase and servo clocks between two or more PMAC cards. The J5A (RS-422)
allows communication interconnection of multiple PMACs.
Caution
Pin #1 should NOT be connected if serial communication to the Turbo
PMAC2 PCI Ultralite using J5 is tied to a modem style terminal
emulator such as Microsoft Windows Terminal.
J5: 10-pin IDC header (M)
Mating: 10-pin IDC header (F)
Front view
13579
246810
Pin#
Symbol
Function
Description
Notes
1
PHASE
In/Out
Phase Clock
2
DTR
Bidirect
Data Terminal Ready
Tied to "DSR"
3
TXD/
Output
Receive Data
Host transmit data
4
CTS
Input
Clear to Send
Host ready bit
5
RXD/
Input
Send Data
Host receive data
6
RTS
Output
Request to Send
PMAC ready bit
7
DSR
Bidirect
Data Set Ready
Tied to "DTR"
8
SERVO
In/Out
Servo Clock
9
GND
Common Ground
10
+5V
Output
Voltage Reference
The baud rate for the RS-232 serial port is set by variable I54. At power-up reset, The Turbo PMAC2 PCI
Ultralite sets the active baud based on the setting of I54 and the CPU speed I52. Note that the baud rate
frequency is divided down from the CPU’s operational frequency. The factory default baud rate is 38400.
This baud rate will be selected automatically on re-initialization of the Turbo PMAC2 PCI Ultralite, either
in hardware using the re-initialization (E51) jumper or in software using the $$$*** command.
To change the baud rate setting, set I54 to the corresponding value of desired frequency. Issue a SAVE
and recycle power on the unit. For odd baud rate settings, refer to the Turbo Software Reference Manual.
I54
Baud Rate
I54
Baud Rate
8
9600
12
38,400
9
14,400
13
57,600
10
19,200
14
76,800
11
28,800
15
115,200
Note
I54=12 (38400 baud) is the factory default setting.
SERVO and PHASE are outputs if jumper E1 is OFF; they are
inputs if jumper E1 is ON.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 8
J5A: RS-422 Auxiliary Serial Port
The J5A (RS-422) port provides the ability to communicate using both RS-422 and RS-232. In addition,
this connector is used to daisy chain or interconnect multiple PMACs for synchronized operation (e.g.
over 32 axes MACRO ring).
J5A: 26-pin IDC header (M)
Mating: 26-pin IDC header (F)
Front view
135791113151719
2468101214161820
2123
2224
25
26
Pin#
Symbol
Function
Description
Notes
1
CHASSI
Common
PMAC Common
2
S+5V
Output
+5VDC Supply
Deactivated by E8
3
RD-
Input
Receive Data
Diff. I/O low true
4
RD+
Input
Receive Data
Diff. I/O high true
5
SD-
Output
Send Data
Diff. I/O low true
6
SD+
Output
Send Data
Diff. I/O high true
7
CS+
Input
Clear to Send
Diff. I/O high true
8
CS-
Input
Clear to Send
Diff. I/O low true
9
RS+
Output
Request to Send
Diff. I/O high true
10
RS-
Output
Request to Send
Diff. I/O low true
11
DTR
Bidirect
Data Terminal Ready
Tied to "DSR"
12
INIT/
Input
PMAC Reset
Low is Reset
13
GND
Common
PMAC Common
14
DSR
Bidirect
Data Set Ready
Tied to DTR
15
SDIO-
Bidirect
Special Data
Diff. I/O low true
16
SDIO+
Bidirect
Special Data
Diff. I/O high true
17
SCIO-
Bidirect
Special CTRL.
Diff. I/O low true
18
SCIO+
Bidirect
Special CTRL.
Diff. I/O high true
19
SCK-
Bidirect
Special Clock
Diff. I/O low true
20
SCK+
Bidirect
Special Clock
Diff. I/O high true
21
SERVO-
Bidirect
Servo Clock
Diff. I/O low true
22
SERVO+
Bidirect
Servo Clock
Diff. I/O high true
23
PHASE-
Bidirect
Phase Clock
Diff. I/O low true
24
PHASE+
Bidirect
Phase Clock
Diff. I/O high true
25
GND
Common
PMAC Common
26
+5V
Output
+5VDC Supply
Power supply out
Note
Jumpers E17 and E18 must connect pins 2 and 3 to use this port for
serial communications.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 9
J6: (JDISP) Display Connector
The J6 (JDISP) connector is used to drive the 2-line x 24-character (ACC-12), 2 x 40 (ACC-12A) LCD,
or the 2 x 40 vacuum fluorescent (ACC-12C) display unit. The Display command may be used to send
messages and values to the display.
J6: 14-pin IDC header (M)
Mating: 14-pin IDC header (F)
Front view
135791113
2468101214
Pin#
Symbol
Function
Description
Notes
1
Vdd
Output
+5V Power
Power supply out
2
Vss
Common
PMAC Common
3
Rs
Output
Read Strobe
TTL signal out
4
Vee
Output
Contrast Adjust. VEE
0 to +5 VDC
5
E
Output
Display Enable
High is enable
6
R/W
Output
Read / Write
TTL signal out
7
DB1
Output
Display Data
8
DB0
Output
Display Data
9
DB3
Output
Display Data
10
DB2
Output
Display Data
11
DB5
Output
Display Data
12
DB4
Output
Display Data
13
DB7
Output
Display Data
14
DB6
Output
Display Data
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 10
J7: (JHW) Handwheel Encoder Connector
The J7 (JHW) connector provides the interface for two quadrature encoders, typically to be used as
handwheel or time base master encoders. It also provides two channels of pulse-and-direction or PWM
top-and-bottom pair outputs.
J7: 20-pin IDC header (M)
Mating: 20-pin IDC header (F)
Front view
135791113151719
2468101214161820
Pin#
Symbol
Function
Description
Notes
1
GND
Common
PMAC Common
2
+5V
Output
Reference voltage
Ok for Encoder Power
3
HWA1+
input
HW A+ Chan.
Also pulse input
4
HWA1-
input
HW A- Chan.
Also pulse input
5
HWB1+
input
HW B+ Chan.
Also direction input
6
HWB1-
input
HW B- Chan.
Also direction input
7
HWA2+
input
HW A+ Chan.
Also pulse input
8
HWA2-
input
HW A- Chan.
Also pulse input
9
HWB2+
input
HW B+ Chan.
Also direction input
10
HWB2-
input
HW B- Chan.
Also direction input
11
PUL1+
Output
PFM Pulse+
Also PWM output
12
PUL1-
Output
PFM Pulse-
Also PWM output
13
DIR1+
Output
PFM Direction+
Also PWM output
14
DIR1-
Output
PFM Direction-
Also PWM output
15
PUL2+
Output
PFM Pulse+
Also PWM output
16
PUL2-
Output
PFM Pulse-
Also PWM output
17
DIR2+
Output
PFM Direction+
Also PWM output
18
DIR2-
Output
PFM Direction-
Also PWM output
19
GND
Common
PMAC Common
20
+5V
Output
Reference voltage
Ok for Encoder Power
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 11
TB1: Logic Power
Caution
This connector should not be used (connected) if the Turbo PMAC2
PCI Ultralite is installed in a PCI slot.
This terminal block can be used to provide the input power for the Turbo PMAC2 PCI Ultralite board for
standalone operation, when it is NOT in a bus (PCI) configuration.
When the Turbo PMAC2 PCI Ultralite is mounted in a PCI slot, this terminal block should NOT be used.
In this mode, the power is supplied automatically through the PCI connection.
Note
The TB1 connector is a 2-pin position in the standard configuration.
However, if the analog inputs option (J1) is populated, then it is a 4-
pin connector to allow for A/D converters power (±12VDC).
Pin #
Symbol
Function
Description
Notes
1
GND
Common
Reference Voltage
2
+5V
Input
Positive Supply Voltage
Supplies all PMAC digital circuits
3
+12V
Input
Positive Supply Voltage
+12V to +15V
4
-12V
Input
Negative Supply Voltage
-12V to -15V
Note
The ±12VDC power is only used for the A/D converters, it is not
necessary for powering-up PMAC.
TB2: Watchdog Relay
This terminal block provides the output for the watchdog timer relay, both normally open and normally
closed contacts. This is usually used to connect to logic circuitry to bring the machine to a safe stop in
case of a watchdog trip.
The normally-closed relay contact is closed while the Turbo PMAC2 PCI Ultralite is operating properly –
it has power and the watchdog timer is not tripped –and open when it is not operating properly –either it
has lost power or the watchdog timer has tripped.
The normally-open relay contact is open while the Turbo PMAC2 PCI Ultralite is operating properly, and
closed when it is not operating properly (watchdog tripped).
Pin #
Symbol
Function
Description
Notes
1
WD_NC
Output
Watchdog Relay Out
Normally closed
2
COM
Input
Watchdog Return
+V or 0V
3
WD_NO
Output
Watchdog Relay Out
Normally open
4
COM
Input
Watchdog Return
+V or 0V
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
Connector PinOuts 12
MACRO Interface Connectors
These connectors provide MACRO connectivity using either Fiber Optic, or RJ45 (optional).
Option A provides the MACRO-ring fiber optic SC-style interface connector. The fiber optic version of
MACRO uses 62.5/125 multi-mode glass fiber optic cable terminated in an SC style connector. The
optical wavelength is 1,300nm.
MACRO SC-Style Fiber
Connector
CN3 and CN4
Front View
OUT IN
Pin #
Symbol
Function
1
IN
MACRO Ring Receiver
2
OUT
MACRO Ring Transmitter
Option C provides the MACRO-ring RJ-45 electrical interface connectors.
MACRO RJ45
Connector
CN3 and CN4
Front View
OUT IN
Pin #
Symbol
Function
1
DATA+
Differential MACRO Signal.
CN4: DATA+ input. CN3: DATA+ output.
2
DATA-
Differential MACRO Signal.
CN4: DATA- input. CN3: DATA- output.
3
Unused
Unused terminated pin.
4
Unused
Unused terminated pin.
5
Unused
Unused terminated pin.
6
Unused
Unused terminated pin.
7
Unused
Unused terminated pin.
8
Unused
Unused terminated pin.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
E-Point Jumpers 13
E-POINT JUMPERS
E-Point Jumpers on-board Location
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Turbo PMAC2 PCI Ultralite HRM
`
E-Point Jumpers 14
E0: Reset Lock Enable
E-Point and
Physical Layout
Location
Description
Default
E0
A-7
Remove jumper for normal operation
Jump pins 1 to 2 to force the card to stay in the reset
state.
No jumper installed
E1: Card 0 (Clock Direction) Select
E-Point and
Physical Layout
Location
Description
Default
E1
A-2
Remove jumper to specify that this PMAC is Card
0, which generates its own phase and servo clock
(default).
Jump pins 1 to 2 to specify that this PMAC is not
Card 0, but Card 1 to F (15), which requires external
phase and servo clock signals from the serial port to
operate.
No jumper installed
E2: 40/60 MHz Operation
E-Point and
Physical Layout
Location
Description
Default
E2
A-2
Remove jumper.
Jump pins 1 to 2.
No jumper installed
E3: Re-Initialization on Reset Control
E-Point and
Physical Layout
Location
Description
Default
E3
A-2
Remove jumper for normal reset mode (default).
Jump pins 1 to 2 for re-initialization on reset.
No jumper installed
E4-E6: (Reserved for Future Use)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com