Delta Holder XL User manual

C
D
E
A
G
B
H
I
Assembly instructions HL6500
Smartphone
Holder XL
x1 — Phone Holder
x1 — Bungee
x1 — Handlebar ClampBolt
x2 — Rubber Shim
x1 — Thumb Screw
x1 — Stem Mount
x1 — Short Bolt
x1 — Dry Bag
x4 — Phone Bumpers
Parts
A
B
C
D
E
F
G
H
H
I
Tool Required
Phillips Head
Screwdriver
WARNING
Using phone device while riding can cause accidents resulting in serious injury.
Important: Nuts and bolts can loosen over time, resulting in serious danger should the item fall o while in motion.
Check frequently to ensure all bolts are properly tightened. Ensure the device ts snugly in the holder before riding.
Not for o-road use.
STEM MOUNT OPTION
HANDLEBAR CLIP OPTION
F

STEM BOLT
1
1
2
2
1
1
2
2
Delta Cycle Corporation 36 York Avenue, Randolph, MA 02368 USA / 800-474-6615 / www.designbydelta.com
Need help?
Email us at [e-mail]
& we’ll help solve your issue.
Assembly video
Visit designbydelta.com/downloads
Using the Handlebar Clamp
Using the Stem Mount
IMPORTANT
SAFETY NOTE
Do not attach clamp
to any tapered section
of your handlebar.
IMPORTANT
SAFETY NOTE
Connect holder to handlebar clamp
using short bolt and adjust angle before
full tightening.
Connect handlebar clamp to bar
using rubber shims as needed.
Use thumb screw; tighten to
secure the handlebar clamp.
Remove existing stem cap from bicycle.
Use existing stem bolt to install Smartphone
Holder stem mount on to your bicycle stem.
Connect holder to stem mount
using short bolt and adjust angle
before full tightening.
Never loosen the
stem clamp bolts.