
2
2. Pairing with Bluetooth device
Pair this unit with the Bluetooth device you want to connect.
1. Activate Bluetooth function of the Bluetooth device to be connected.
2. With the power o, press and hold this unit’s 1/3button for 4 seconds or more.
After the Bluetooth LED lights, it blinks in approximately 1 second intervals and this
unit enters pairing mode.
3. Select the “DENON AH-GC30” appears on the Bluetooth device to be connected.
When connected, the Bluetooth LED on this unit lights for approximately 5 seconds.
•If you are requested to enter a PIN code (pass key), enter “0000” (four zeros).
3. Playback music
Playback operations can be performed from both the Bluetooth device and this unit. Here
we will explain the operations using the control buttons on this unit.
Play/Pause Press the 1/3 button once. Increase volume
Press the volume “+” button.
Next track Press the 1/3 button twice.
Decrease volume
Press the volume “-” button.
Previous
track
Press the 1/3 button three
times.
4. Noise Cancelling function
When the NC button is pressed and held for 2 seconds or more, the NC LED blinks and
the ambient noise cancel function turns on. Press the NC button to cycle between 3
modes: Airplane / City / Oce and choose your preferred setting.
Refer to the web manual for other functions information and
operation procedure details, such as remaining battery indication,
audio guidance, and so on.
Enter the following URL into your web browser:
manuals.denon.com/AHGC30/ALL/EN/
Web Manual
AH-GC30EM_QSG_10A_190117.indd 2 2019/01/18 13:13:16