DentaSonic IPR-EVO User manual

1
SWISS IPR
INNOVATION
Universal
brushless motor for:
• IPR
• Endo
• Finishing, Polishing
Feautures:
• Torque sensor
• Acustic alarm
IPR-EVO
®
interproximal reduction
evolution
PATENT PENDING
Instruction
of use

2
UNIVERSAL USE
Endo File
IPR Strip
Polishers, discs
Polishing
Program
Suitable for all nishing, and polishing
strips and discs with RA shank (2,35mm
contrangle).
Endo
Program
Suitable for all endo le with RA shank
(2,35mm contrangle)
IPR
Program
Suitable for DentaSonic DiaStrip, and all
automatic strip on the market today

3
Foreword 4
01 Introduction 6
02 Range of application and contraindications 6
03 Technical Parameter 7
04 Structure 8
05 Operation panel introduction 9
Multitalent IPR-EVO 10
Technical details 10 - 11
Menu instruction 12
06 Usage method programs 13
07 Cautions 19
08 Troubleshooting 20
09 Maintenance 20
10 Sterilization 22
11 Transportation and storage 22
12 Product list 22
13 After-sale service 23
14 Symbols 23
15 Electromagnetic Compatibility 24
Content

4
Foreword
Thanks for using the cordless endo motor. For the sake of safety and efcient using
of this product, please read this manual carefully.
This equipment meets the national standard: GB9706.1 M2007, medical electrical
equipment Part 1 and general requirements for safety.
Protection against electrical shock: class Il, type B We’ll take the responsibility for the
product’s safety, reliability and property under the following conditions:
1. lnstallation, commissioning and maintenance of the equipment should operate
by professionals approved by our company or who gain national appropriate
level qualications.
2. This equipment should be operated by qualied or approved personnel.
Operator should have specialized medical application skills, and work follow
the manual.
3. The equipment can’t be used in the environment with ammable anesthetic
gases mixed with air or nitrous oxide.
This device is a dental instrument, besides dental treatment, please don’t use it.
Our company reserves the right to modify the design, technology, accessories, manual
and package content for this equipment. Please prevail in kind. If there is difference
between pictures and object, please make the object as the standard.

5
Notice
(The following conditions are not covered by the company’s warranty)
1. Faults and damage caused by poor maintenance or without authorization.
2. Faults and damage due to any Retting are unauthorized.
3. Faults and damage result from factor of other company’s products.
4. Faults and damage result from using non specied spare parts when
maintaining equipment.
5. Fault and damage because of failure to comply with the precautions and operation
method described in the manual.
6. Faults and damage due to inappropriate environment for operation,
such as the environment for supply, installation etc.
7. Faults and damage caused by earthquakes, oods, lightning and other
irresistible factors.
8. The user did not install and use base on the electromagnetic compatibility
information provided in the random le
9. Use due to strong electromagnetic interference, such as close to the mobile phone,
microwave oven and other portable and mobile RF communication equipment may
affect the IPR-EVO performance.
Caution
The equipment or system shall not be used close to or stacked with other equipment.
If it must be used close to or stacked, it shall be observed and veried to work properly
in the conguration used.
In addition to transducers and cables sold by the manufacturer of the equipment or
system as spare parts for internal components, the use of non-prescribed accessories,
transducers and cables may result in increased emission or reduced immunity of the
equipment or system.
Use with equipment and systems of non-specied accessories, transducers or cables
may result in increased emission or reduced immunity of equipment or systems.

6
01 Introduction
Cordless endo motor is a professional equipment for root canal treatment.
It converts electrical energy into mechanical energy, and then controls the rotation
and transmission through the motor. It uses micro motor to achieve the purpose
of expanding the root canal in the root canal treatment. Cordless hand piece delivers
freedom of movement.
Features
1. Lightweight, ergonomic design, easy to carry.
2. With 16:1 and 1:1 electric contra angle.
3. The equipment will auto-reverse or auto reverse & stop, auto-stop according
to different torque and resistance.
4. Use soft starting and stop, provide co nvenient operation and protect the le from
broken when suffer Instant Impact.
5. It could store 9 programs. The parameter could be preset or modied according
to actual operation.
6. Built-in recharging and high capacity battery not only brings convenience
of replace battery, but also save the cost.
7. Electric contra angle are autoclave sterilization up to 135”C.
8. LED light
02 Range of application and contraindications
Cordless endo motor applies to stomatology. It use to expand the root canal in the
root canal therapy such as pulp necrosis, chronic pulpitis, chronic apical periodontitis
(Incl. perleplcal grenulome, perlaplcal abscess end perlaplcel cyst}, pulp-periodontal
syndrome and for who has system disease which not suitable for teeth extraction but In
need of treatment or keep offending teeth temporarily, IPR and nishing and polishing.
Contraindications
It can’t be used with high frequency surgical equipment.
Heart patients use it with cautious!
People who use Implantable electron le devices llke heart pacemaker are not suitable
to use it without doctor’s advice.

7
03 Technical parameter
Model: IPR-EVO 1
Degree of protection against harmful Into the liquid: Common equipment
(not anti-closed inlet device), Operational Mode: Continuous operation
Main Unit
Battery Voltage: 3. 7Vdc
Battery capacity: 1050mAh
Net weight: 200g
Adapter
Adapter voltage AC: 100-240V 50/60Hz
Output voltage: 5Vdc
Output current: 1A
Note:
Users are not allowed to replace the battery by themselves.
The replacement shall be made by the manufacturer or authorized dealer.
1. Rotation speed reaches the speed range of 800 to 1000 rpm
2. 3 - 3,5N torque
3. When the torque reaches the alarm sound, it usually reaches 2.5N; the stop is 3N
FDA Owner Operator Number: 10051861
SGS: ISO 13485:2003 CE Conformity

8
04 Structure
Model: IPR-EVO 1
Structure
1. IPR Head 1.1
2. Main unit
3. Charging base
4. Adapter
5. Spray nozzle
6. LED lamp
pic. 01
IPR Head 1.1 Spray Nozzle
Adapter
Main unit
Charging base

9
05 Operation panel introduction
pic. 02
LED Light
Motor switch
LCD Screen
Function key
Minus
Plus
program key
Power
ON/OFF
Charger
bases

10
RA contra-angle
rotating head 16:1 and 1:1
can also be used
with LED light
Name: IPR-EVO IPR-EVO Head Endo Head Finishing Head
Article Ref. IPR-EVO1 IPR-H1 EH-2 FP-3
Light: yes no yes yes
Stroke / movement: rotating 0.9mm reciprocating rotating rotating
Transmission Ratio: silver (ring) 1:1 green (ring) 16:1 silver (ring) 1:1
Speed: 140 - 600 min-1 max 4'000 min-1 140 - 600 min-1 max 3'000 min-1
Cordless and safe
IPR-EVO is an easy-to-use
universal system that is safe and
effective in use.
Safety functions for IPR
1) Torque control
The torque control stop to work
when the set torque is reached.
2) Torque sensor,
The torque sensor ring up when
the set torque is reached, and
stop to work.
Safety functions for Endo
The autoreverse and auto-
forward modes with automatic
safety stop minimize the risk of
le breakage.
Small head
The extremely small head enlar-
ges the eld of vision and offers
the best possible access to the
treatment site.
Maximum comfort
Ergonomically shaped drive
hand-piece for comfortable and
fatigue-free working.
360° rotating contra-angle
attachment
The contra-angle attachment
can be attached to the drive
handpiece as required. This
means exible handle positions
during treatment.
interproximal enamel reduction evolution
IPR-EVOIPR-EVO
Multitalent IPR-EVO The evolution in IPR
Technical details

11
Speed, Torque, Working mode can be adjusted.
Speed: 140-600 rpm adjustable Torque: 0.6-4.0N.cm adjustable
ENDO
RA Endo les
RA contra-angle
rotating head
16:1
RA contra-angle rotating head 1:1. Speed, Torque, Working mode can be adjusted.
Speed: 1400-2000 rpm adjustable Torque: 0.6-4.0N.cm adjustable
IPR-EVO reciprocating head 1:1. Speed, Torque, Working mode can be adjusted.
Speed: 1400-5000 rpm adjustable Torque: 0.6-4.0N.cm adjustable
PATENT PENDING
FINISHING / POLISHING
Brushes Discs Polishers
All DiaStrip All Proxo le
IPR-EVO
reciprocating head
1:1
compatible with all automatic
strips and other brands like
(Dentsply, Dentatus, Intensiv).
reciprocating head
push botton rotating head
push botton rotating head
IPR-EVO, Restoration
IPR-EVO handpiece drive
Battery type: Li-ion
Battery voltage: 3.7 V
Rated capacity: 1050 mAh
Torque range / Torque stages 0.6 – 4.0 Ncm / 0.6 / 0.7/ 0.8 / 0.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.7 / 1.8 / 2.0 until 4.0 Ncm
Weight: 120 g
EH-2 contra-angle head
Transmission ration: 16:1
Coupling system: Dentasonic coupling
Recommended root canal instruments: Files for rotary root canal preparation at 300 min-1 with a shaft of Ø 2.35 mm
Weight: 20g
Hygene: thermo washer disinfectable / sterilizable
Charging station
Main voltage: 100-240V 50/60Hz standart EU for US plug, please ask
Permissible voltage uctuation: +/- 10%
Frequency: 50 – 60 Hz
Power: 5W
Weight: 60g

12
POWER ON/OFF button
Power ON: Press the POWER ON/OFF button more than 2 second to turn
on the equipment.
Power OFF: Press the POWER ON/OFF button again to turn off the equipment.
Motor switch
After turn on the equipment, press motor switch start to work. Press It again, the motor
wlll stop.
Function key----S
Press function key, can be adjusted speed, Torque and Working mode
Order is: Speed(SP)----Torque(TQ)----
Working mode--- Save
When the option ickers, the data can be adjusted. When setting the data, press Sto
save the data in the current program number.
Program key-----P
Press”P”, working program is Selectable (P1-P9)
Unit of per mode: Speed: rpm Torque: N•cm
This instrument is equipped with 16:1 angle head, and with 1:1 IPR angle head
Please select according to the following range of angle head parameters:
Speed (rpm): 140~600 Speed (rpm): 140~600
Radio: 16:1 Radio: 1:1
Torque (N•cm): 0.6~4.0 Torque (N•cm): 0.6~4.0
Torque
Working Mode
Program
Speed
Battery status
pic. 03
TQ
P1
8
This instrument is equipped with 16:1 angle head.
Please select according to the following range of angle
head parameters:
Speed（rpm）Radio Torque（N•cm）
~ 006041 16:1 0.6~4.0
Program
Speed
Battery status
Working mode
Torque
9
POWER ON/OFF button
Power ON: Press the POWER ON/OFF button
morethan 2 second to turn onthe equipment.
Power OFF: Press thePOWER ON/OFF button
again to turn off the equipment.
Motor switch
After turn onthe equipment, press motor switch
startto work. Press Itagain, the motor wlll stop.
Function key----S
Press function key,can beadjusted speed,Torque
and Working mode
Order is: Speed(SP)----Torque(TQ)----
Working mode--- Save
When the option flickers, the data can beadjusted.
When setting the data, press S to savethedata in
the current program number.
Program key-----p
Press"P",working program is Selectable(P1-P9)
Unit of per mode: Speed : rpm; Torque : N•cm
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.

13
Endo Head Usage Program: P1 - P7
Program Code: P1, P6
Speed, Torque, Working mode can be adjusted.
Speed: 140-600rpm adjustable
Torque: 0.6-4.0N.cm adjustable
Working mode
Stop working when
the resistance exceeds the setting torque.
Keep running then stop when the resistance
exceeds the setting torque.
In forward mode,auto-reverse when the
resistance exceeds the setting torque.
Program code: P7
Speed can be adjusted
Torque: -----
Working mode
Reverse mode, when encountering resistance, speed-up
and increase the torque.
When the resistance is too large, stop working, the
resistance decreases, and restart.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
pic. 05
pic. 04

14
IPR Head Usage Program: P2 (adjustable IPR Program)
Program Code: P2 IPR-Low
Speed, Torque, Working mode can be adjusted.
Speed: 200-300rpm adjustable
Torque: 2.5-4N.cm adjustable
Working mode
Stop working with acustic alarm when
the resistance exceeds the setting torque.
Speed, Torque, can be adjusted.
Speed: 200 - 300rpm are low
Torque: 1.5 - 2.5N.cm adjustable light pressure
Speed, Torque, can be adjusted.
Speed: 250 - 400rpm adjustable are medium
Torque: 2 - 3.5N.cm adjustable medium pressure
Speed, Torque, can be adjusted.
Speed: 200 - 500rpm adjustable are high
Torque: 2.5 - 4N.cm adjustable strong pressure
pic. 06
Program code:
P2 IPR-Low
Program code:
P2 IPR-Medium
Program code:
P2 IPR-High
P2
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.

15
Finishing Usage Program: P3
Program Code: P3 Finishing, Polishing
Speed, Torque, Working mode can be adjusted.
Speed: 200-400rpm adjustable
Torque: 0.6-2N.cm adjustable
Working mode
Stop working with acustic alarm when
the resistance exceeds the setting torque.
Speed, Torque, Working mode can be adjusted.
Speed: 200-400rpm adjustable
Torque: 0.6-4N.cm adjustable
pic. 07
Program code:
P3 Contouring,
Finishing, Polishing
P3
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.

16
Program Code: P8
Speed: 140-600rpm adjustable
Torque: -----
Working code
Forward working, When encountering resistance,
speed up and increase the resistance. When the resistan-
ce is too large, stop working, the torque encountered de-
creases, and restart the work.
Program code: P9
Speed: 160-300rpm adjustable
Torque: ----
Working mode
Forward 45°, reverse 135°
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
TQ
P1
Program Code：-P1 P9
Program code:P7
Speed can be adjusted
Torque:-----
Working mode:Reverse mode,when
encountering resistance,speed-up
and increase the torque. When the
resistance is too large, stop working,
the resistance decreases, and restart
10
Program code:P8
Speed:140-600rpm adjustable
Torque:-----
Working code:Forward working,
When encountering resistance,
speed up and increase the resistance.
When the resistance is too large, stop
working, the torque encountered
decreases, and restart the work.
Program code:P9
Speed:160-300rpm adjustable
Torque:----
Working mode:Forward 45°,reverse 135°
11
TQ
P7
TQ
P9
TQ
P8
45
Program Code:P1-P6
Speed,Torque,Working mode can
be adjusted
Speed:140-600rpm adjustable
Torque:0.6-4.0N.cm adjustable
Keep running then stop when the
resistance exceeds the setting torque.
In forward mode,auto-reverse
when the resistance exceeds the setting
torque.
Working mode: Stop working when
the resistance exceeds the setting torque.
Program code: P8-P9
pic. 08
pic. 09

17
06 Usage method
Charging
1. Connect the charging base with adapter. The charger indicator light will ON.
2. Put the main unit in the charger base, charger base is without other thing,
the light is on when you put it in correct.
3. It will be fully charged in about 3 hours.
Loading & Unloading Electric angle head
Connect the electric angle head with main unit, locating pin of the electric angle should
be placed in the locating slot of the main unit until you hear “click” sound. Please take
off the angle head in parallel and straight direction.
Notice: Please turn off the motor when loading or unloading the angle
head (Refer Pic. 10)
Loading & Unloading le
Insert the le into the rotary shaft hole of the angle head, gently rotate to nd the corre-
sponding position with the half-round part of the le. After nding the position, insert
a part rst, do not press thback cap on the angle head, and then press the le into the
angle head with a slightly larger force. When the sound of “cut” is heard, the le is con-
nected to the angle head. When taking out, press and hold the button above the angle
head while pulling the le out of the head.
pic. 10
¡Incasethesterilizerchambertemperaturecouldexceed
135℃duringthedrycycle,skipthedrycycle.
¡Alwaysplacethehandpieceinthecenteroruppershelf
ofthechamber,asthelocaltemperatureatthebottom
ofchambercouldrisebeyondthesetvalue.
3．Sterilization
 Steamautoclaveisrecommended.
AutoclaveProcedure:
 ① Scrubdirtanddebrisfromthehandpiece,andwipeclean
withalcohol-immersedcottonswaborcloth.Donotusea
wirebrush.
 ② LubricatewithPANA-SPRAYorLubricantoil.Referto２.
Lubrication.
 ③ Insertintoanautoclavepouch.Sealthepouch.
 ④ Autoclavefor20min.at121℃（103KPa）or15min.at
132℃（186KPa）.
４．Warranty
 NSKwarrantsthehandpieceagainstpoormanufacturing,poor 
workmanshipanddefectsinmaterials.NSKreservestheright
toanalyzeanddeterminethecauseofanyproblem.

Warrantyisvoidedshouldthehandpiecebenotusedcorrectly .

Replacementpartsareavailablefor７yearsbeyonddiscontinua- 
tionofthemodel.
E-typeSprayNozzle
PANA-SPRAY
Handpiece
Fig.2
PANA-SPRAY
¡Besuretoholdthehandpiecefirmlytopreventthe 
handpiecefromslippingoutbythespraypressurewhen
lubricating.
¡Supplylubricantuntilitcomesoutofthehandpiecenose
(forapprox.2seconds).
¡KeepthePANA-SPRAYcanupright.
04.01.005◯
Ｍ
Positioning groove
Motor joint
Angle head joint
Positioning pin

18
Notice:
Before loading or unloading,please turn off the motor. When loading the bur, please
pull the le several times to make sure it’s xed well before using it.
Please make sure the le is clean, if dirt things get into the head, it will lead to the le
vibration.
Install & Uninstall LED Lamp
Insert the light strip into the socket rst, then fasten the light strip.
Please install before use!
After the motor stop working, the lights turn off for about 3 seconds.
Can be removed.
pic. 11
First insert
Then fasten
Note: no Bending
Push

19
Operation
Long press the POWER ON/OFF button: Motor starts work
Press the Motor switch: le starts rotation
Press the Motor switch again: bur stops rotation.
After treatment
After treatment, press the Motor switch, le stop working. Long press POWER ON/OFF
button, machine turns off. Take off the electric contra angle head from main unit, and
then cover the motor cap.
If no operation about 5 minutes, power will auto turn off.
Last program settings can be memorized when the power turns on.
07 Cautions
1. Don’t use damaged, winding or unqualied les,it will cause accident if use.
2. Please comply with the le speed by manufacturer appointed when using.
3. Don’t put or use this product in the strong sunshine place or near high
temperature place.
4. Please pay attention when put the main unit in the charger base, the operation
panel should be outward, misdirection will damage the product or can’t charge.
5. Don’t put the lubricating oil in the main unit or don’t put the main unit
in autoclave sterilization.
6. Our product is not water-proof. Don’t let water or liquid in it, to avoid short circuit,
rusting or discoloring.
7. Don’t drop the main unit and the charging base, don’t use other adapter.
8. Please use the congured adapter when charging, don’t use other adapter.
9. Please use the electric contra angle provided or approved by our factory,
otherwise it maybe cause the misoperation.
10. Please don’t use our product in the electromagnetic environment of strong
magnetic eld and strong electric eld.

20
08 Troubleshooting
If the product is found to be in abnormal operation during use, please refer
to the following methods for maintenance and adjustment.
Problem Reason & Solution
Doesn’t work: 1. Nopower, please charge it.
2. Press the ON/OFF button in short time, please
press the ON/OFF button more than 2 seconds.
3. POWER ON/OFF button is broken:
please contact the dealer or manufacturer.
No charging display: 1. Doesn’t connect well with adapter,
please pull out and try it again.
2. There are other things in the bottom
of the machine or changing base, please clean it.
3. Doesn’t put the main unit in the right place
of the charging base.
If the above methods are still not working properly, please contact the dealer
or our company.
09 Maintenance
If not using for a long time, when you reuse it, please check it works normally and safely
or not. If not using for a long time, please make sure to charge it every month, in order
to protect the working life of the battery.
From the purchasing date, the working life is about 5 years.
Please clean the surface of the main unit by soft cloth with neutral detergent,
and then using wet cloth to clean it.
Note: It is forbidden to wipe the banana oil, oil (light gasoline) and so on. Do not put the
machine in the sun or near the re, so as not to cause battery explosion.
If the instrument reaches the service life and the parts are damaged and scrapped,
it should be handled according to the local medical equipment scrapping regulations.