Denver CAT-730 User manual

INSTRUCTION MANUAL
Car Stereo DVD/SVCD/VCD/CD/MP3/MP4 Player
with PLL FM Stereo Radio
Radio Data System
7” (17,8cm) TFT-LCD Display
Touch Screen Control
Front AUX IN / USB / SD / MMC Card Input
Detachable Front Panel
CAT-730
RESET
13
18
19 46 5 3 2 17 78 15 1011 16
12
14
7 inch

EN2
BEFORE YOU BEGIN
PRECAUTIONS:
CAUTION:
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE
HAZARD.
• Keepthismanualhandyasareferenceforoperatingproceduresandprecautions.
• Alwayskeepthevolumelowenoughsoyoucanhearsoundsoutsideofthecar.
• Protectthisproductfrommoisture.
• Ifthebatteryisdisconnectedordischarged,thepresetmemorywillbeerasedandmustbe
reprogrammed.
FEATURES:
DVD video playback
ItispossibletoplaybackDVDvideo,DVD+-R,DVD+-RWandDVD+-DL.
Video CDs featuring PBC compatibility
ItispossibletoplaybackVideoCDsfeaturingPBC(playbackcontrol).
CD playback
MusicCD/CD-R/CD-RWplaybackispossible.
MP3/WMA le playback
ItispossibletoplaybackMP3/WMAlesrecordedonCD-ROM/CD-R/CD-RW.
MP4 le playback
ItispossibletoplaybackMP4les.
PAL/NTSC compatibility
Thisunit isPAL/NTSCsystem compatible. When connecting other components tothis unit,be
surecomponentsarecompatiblewiththesamevideosystemorelseimageswillnotbecorrectly
reproduced.
Multi-audio
YoucanswitchbetweenmultipleaudiosystemsrecordedonaDVDasdesired.
Multi-subtitle
YoucanswitchbetweenmultiplesubtitlelanguagesrecordedonaDVDasdesired.
Multi-angle
YoucanswitchbetweenmultipleviewinganglesofascenerecordedonaDVDasdesired.
When an operation is prohibited
WhenyouarewatchingaDVDandattempttoperformanoperation,itmaynotbeperformedby
theprogrammingonthedisc.Whenthishappens,thisunitindicatesonthescreen.

EN3
INSTALLATION
PRECAUTIONS
• Choosethemountinglocationcarefullysothattheunitwillnotinterferewiththenormaldrivingfunctionsofthe
driver.
• Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfromdirectsunlightorhotair
fromtheheater,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.
• Useonlythesuppliedmountinghardwareforasafeandsecureinstallation.
• Besuretoremovethefrontpanelbeforeinstallingtheunit.
NOTE :Inclinationangleforcarradioinstallationmustnotexceed30˚otherwisethefrontpanelwillnotopen.
NOTE: Keepthereleasekeyinthesafeplaceasyoumayneeditinfuturetoremovetheunitfromthecar.
Detaching and attaching the front panel
Thefrontpanelofthisunitcanbedetachedinordertopreventtheunitfrombeingstolen.
Beforedetachingthefrontpanel,besuretopressthe button(1)OFFrst.
Then press the buttonanddetachthepanelbypullingittowardsyouasillustrated.
Notes:
• Donotpressthefrontpanelhardagainsttheunitwhenattachingit.Itcanbeeasilyattachedbypressingitlightly
againsttheunit.
• Whenyoucarrythefrontpanelwithyou,putitinthesuppliedfrontpanelcase.
• Donotpresshardorgiveexcessivepressuretothedisplaywindowofthefrontpanelwhenattachingittothe
unit.
Detaching and attaching the display screen
• Donotpresshardorgiveexcessivepressuretothedisplaywindowofthefrontpanelwhenattachingittothe
unit.
• Payattentionnottoputanypressureonthedisplayorcontrolbuttons.
Notes :
• Donotpressthefrontpanelhardagainsttheunitwhenattachingit.Itcanbeeasilyattachedbypressingitlightly
againsttheunit.
• Whenyoucarrythefrontpanelwithyou,putitinthesuppliedfrontpanelcase.
1
B
A
C
2
182mm
53mm
345
Bend these claws,
ifnecessay
Release screw and
bracket
To detach
Slidethescreenreleasebutton
totherightthenremovethe
displaytowardsright.
To attach
Pushandinsertthescreenalltheway
downuntilyouheard2click sounds
indicatingbothholeconnectoris
attachedproperly.

EN4
Moving the screen forward
Dependingonvehicles’sdashboarddesign,theremightbecasewherethedisplayscreenmight
collideorbumpintothedashboard’scontrolknobs.
Followthestepsbelowtomovethescreenforward.
1. SlidetheswitchtoUNLOCKposition.
2. HolditinUNLOCKpositionthenmovethescreenforward.Theunlockswitchwillmoveto
LOCKpositionautomaticallywheninplace.
CLEANING THE CONNECTOR
Theunitmaynotfunctionproperlyiftheconnectorsbetweentheunitandthefrontpanelare
contaminatedwithdirt.Inordertopreventthisfromhappening,detachthefrontpanelbypress-
ingthe buttonandcleantheconnectorfromtimetotime.
Cleantheconnectorwithacottonswabtogetherwithcontact
cleanerasillustrated.Besuretocleanthemcarefullypinbypin
andmakesurenottodamagetheconnectingpoints.
CottonSwab
Rearof
frontpanel
Mainunit
LOCK
UNLOCK
1. UNIT
2. RELEASECASE
3. DASHBOARD
4. HEXNUT
5. LOCKWASHER
6. PLAINWASHER
7. CARBODY
8. REARSUPPORTSTRAP
9. TAPPINGSCREW
10. M5X15HEXBOLT
TO SUPPORT THE UNIT
Dashboard
10
7
1
2
3
4
4
4
5
5
6
6
8
9
WIRE CONNECTION
IN / OUT CONNECTOR
DVD Audio Out: White (L) Red (R)
Connect this wire to rear seat
A/VmonitorsystemtoenjoyDVDmovie
Audio Out (Front): White (L) Red (R)
Audio Out (Rear): White (L) Red (R)
Video Out (1/2) : Yellow
ConnecttoexternalA/Vsystemtodisplay
Video In : Yellow
ConnecttoexternalVideoequipment
Rear camera In : Blue
Connect to rear camera output
CONTROL WIRE
Parking (Gray) : Connect this wire to car hand brake system
Rear camera (Red) : Connect to back rear camera
Duringbackgearcondition,thiswireshouldbeconnectedtohighvoltage.
DRIVING WITHOUT VIDEO DISPLAY
Followtheinstallationbelowsowhenthecarisinmotion,novideowillcomeoutfromtheLCDscreen.Onlysound
canbeheardfromspeaker.
FUSE 10A
WHITE (-) GREY (+)
PARKING
RED
BACK GEAR
CONTROL
LINE OUT
LINE OUT
ANTENNA
CONNECTOR
FRONT
REAR
DVD AUDIO OUT CAMERA IN VIDEO IN
VIDEO OUT 1
VIDEO OUT 2
L
LR
R
LR
ISO CONNECTOR
B
A
1
2
3
4
5
6
7
8
4
57
8

EN5
Note:
- Onlysoundcanbeheardwhencarisinmotion.
- Referandfollowyourcountry’slawregardingdrivingwithvideo.
Caution:
- Donotattempttoinstallitbyyourselfiftheinstructionisnotcleartoyou.Consultyoudealerconcerningtheinstal-
lationprocedures.
DRIVING WITH VIDEO DISPLAY
Byfollowingtheinstallationbelow,videowillalwaysbeshownonLCDscreennomatterthecarisinmotionornot.
INSTALLING REAR CAMERA FOR PARKING/REVERSE MOTION
Youcaninstallanseparatecameraatthecarrearendsowhendoingparkingorreversemotion,theunitwillauto-
maticallyswitchthevideototherearcameratoguidethedriver.
CONNECTOR A
4. MEMORY+12V
5. AUTOANTENNAOUTPUT
7. +12V(TOIGNITIONKEY)
8. GROUND
NOTE: (connectorAno.7)mustbeconnectedbycarignitionkeyinordertoavoidthatcarbatterybecomesweak
whenthecarwillbenotusedforlongperiod.
CONNECTOR B
1. REARRIGHTSPEAKER(+)
2. REARRIGHTSPEAKER(-)
3. FRONTRIGHTSPEAKER(+)
4. FRONTRIGHTSPEAKER(-)
5. FRONTLEFTSPEAKER(+)
6. FRONTLEFTSPEAKER(-)
7. REARLEFTSPEAKER(+)
8. REARLEFTSPEAKER(-)
Maintenance
FUSE REPLACEMENT
Ifthefuseblows,checkthepowerconnectionandreplacethefuse.Ifthefuseblowsagainafterthereplacement,
theremaybeaninternalmalfunction.Inthiscase,consultyournearestrepairingcenter.
Warning
Usethespeciedamperagefuseforeachlead.Useofahigheramperagefusemaycauseseriousdamage.
Steps:ConnecttheGRAYwiretotheWHITEwire.
To rear camera video out
To reverse gear control switch
To Hand brake switch
ANTENNA
CONNECTOR
FRONT
REAR
AUDIO OUT CAMERA IN VIDEO IN
VIDEO OUT 1
VIDEO OUT 2
R
L
LR
LR
ISO CONNECTOR
B
A
1
2
3
4
5
6
7
8
4
57
8
REAR
O
UT CAMERA IN VIDEO IN
R
L
LR
Top view
Front side
Top view
Front side
Top view
Front side
To rear camera video out
To reverse gear control switch
To Hand brake switch
ANTENNA
CONNECTOR
FRONT
REAR
AUDIO OUT CAMERA IN VIDEO IN
VIDEO OUT 1
VIDEO OUT 2
R
L
LR
LR
ISO CONNECTOR
B
A
1
2
3
4
5
6
7
8
4
57
8
REAR
O
UT CAMERA IN VIDEO IN
R
L
LR
Top view
Front side
Top view
Front side
Top view
Front side
Steps:
1. ConnecttheRearCameraINplugtotherearcamera’svideooutplug.
2.ConnecttheREDwireto“REVERSE”gearcontrolswitch.
3.Checkyourgearcontrolswitchandmakesureitisconnectedto+12V.
Steps:
1.Connectthegraywiretothehandbrakesystem.
2. Checkyourhandbrakeswitchandmakesureitisconnectedto
carbodychassisandproperlygrounded.
To rear camera video out
To reverse gear control switch
To Hand brake switch
ANTENNA
CONNECTOR
FRONT
REAR
AUDIO OUT CAMERA IN VIDEO IN
VIDEO OUT 1
VIDEO OUT 2
R
L
LR
LR
ISO CONNECTOR
B
A
1
2
3
4
5
6
7
8
4
57
8
REAR
OUT CAMERA IN VIDEO IN
R
L
LR
Top view
Front side
Top view
Front side
Top view
Front side
B
1 3 5 7
2 4 6 8
5 7
4 8
A

EN6
LOCATIONS OF PARTS (MAIN UNIT)
1. POWERON/OFF( )
2. SELECTFUNCTIONBUTTON
3. ‘AF’FUNCTIONBUTTON
 (ALTERNATIVEFREQUENCIES)
4. ‘TA’FUNCTIONBUTTON
 (TRAFFICANNOUNCEMENT)
5. ‘PTY’FUNCTION(PROGRAMTYPE)
6. MODEBUTTON(MODE)
7. DVD/CDTRACK/SEARCHBUTTON
8. AUTOSEEKTUNING
9. MUTEBUTTON(MU)
10. PANELRELEASEBUTTON( )
11. TFTDISPLAYPANELRELEASEBUTTON
12. TFT-LCDDISPLAY
13. CDEJECTBUTTON( )
14. DISCSLOT
15.SD/MMCCARDSLOT
16. USBPORT
17. FRONTAUXIN
18. RESETBUTTON RESET
13
18
19 46 5 3 2 17 78 15 1011 16
12
14
7 inch
RESET
13
18
19 46 5 3 2 17 78 15 1011 16
12
14
7 inch
1
814 2517 4
24
2 3 23
VOL+/-
10
1118
16
9
19
22
13
31
5
20
26
27
21
12
15
28
32
30
29
7
6
LOCATIONS OF PARTS (REMOTE CONTROL)
1. POWERON/OFF
2. MODE
3. PLAY/PAUSE
4. TITLE/PLAYBACKCONTROL
5. SELECT
6. SEEK+/SEEK-/CDTRACK/SEARCH
7. VOL+/VOL-
8. GOTO
9. AUDIO
10. ENTER
11. NAVIGATION
12. AUTOSEEK/PRESETSCAN/REPEAT
13. RANDOM/BAND/LOUDNESS
14. DUAL
15. INTRO
16. SUBTITLE
17. SETUP
18. EQUALIZER/ANGLE
19. SLOWMOTION
20. ZOOM/A-BREPEAT
21. STOP
22. CLOCK/ONSCREENDISPLAY
23. MUTE
24. MAINMENU
25. STEP(FRAMEBYFRAMEPLAYBACK)
26. PAL/NTSCSYSTEM
27. PROGRAMTYPE
28. ALTERNATIVEFREQUENCIES
29. TRAFFICANNOUNCEMENT
30. SEARCHPREVIOUS/NEXTFOLDER
31. TWODIGITTRACKSSEARCHS
32. KEYPAD

EN7
Use and care of the remote control
Installing the battery
Slidethetrayoutonthebackoftheremotecontrolandinsertthebatterywiththe(+)andminus(-)polespointing
intheproperdirection.
• Whenuseforthersttime,pulloutthelmprotrudingthetray.
CAUTIONS
• Removethebatteryiftheremotecontrolisnotusedforamonthorlonger.
• Donotrecharge,disassemble,heatordisposethebatteryonre.
• Donotstorethebatterywithmetallicmaterials.
• Intheeventofbatteryleakage,wipetheremotecontrolcompletelycleanandinstallanewbattery
• When disposing of used batteries, please comply with government regulations or environmental public
institution’srulethatapplyinyourcountry/area.
• Alwayscheckcarefullythatyouareloadingthebatterywithplus(+)andminus(-)polesfacingtheproper
directions.
Using the remote control
Pointtheremotecontrolinthedirectionofthefrontpaneltooperate.
IMPORTANT
• Donotstoretheremotecontrolinhightemperaturesordirectsunlight.
• Donotlettheremotecontrolfallontotheoor,whereitmaybecomejammedunderthebrakeoraccelerator
pedal.
GENERAL OPERATIONS
Turning the unit ON/OFF ( )
Press “ ” button to turn on unit. To turn off, press and hold the button again.
MAIN MENU
Thisisrootofthescreenhierarchyandyoucansimplyaccessallfeaturesbytappingonthetouchscreenbuttons.
PressMODEontheremotecontroltoshowtheMAINMENU.
Selecting a source (MODE)
PressMODE repeatedlytoswitchbetweenTUNER,CD/DVD,AUX,USBorSD/MMCmode.
Adjusting Volume
• HeadUnit:RotateVOL knobrightorlefttoincreaseordecreasevolume.
• RemoteControl:PressVOL+ or VOL- toincreaseordecreasevolume.
Mute Button
• HeadUnit:PressMU buttontomutethesoundatonce.Pressagaintoreturntopreviousvolumelevel.
• RemoteControl:Press button.
Loud Button (LD)
1. PressEQonremote.
2. Press( )toselectLoudness.
3. Press( / onremote)toturnfeatureON/OFF.
Tips:You can also press and hold LD button on remote control.
Equalizer (EQ)
1.PressEQonremote.
2.WithDSPPresetshighlighted,press( / onremote)toselectthedesiredequalizermode.
Tips:You can also press EQ once to enter EQ mode, then repeatedly press EQ button to select the desired EQ
mode.
CLOCK
Toshowclock,switchto RADIO  modeandpressCLKonremotecontrol.
Tips: You can also tap any area on screen with no function key to show the clock.

EN8
How to Set Clock
1.PressCLOCKonmainmenu
2.Press( / )tosetthetime.
3.PressXtosaveandexit.
DUAL SETTINGS
DUAL isafeaturethatletsuserlistentoradiowhilethepassengeratthebackcanwatchvideo.Thisunitsupports
connectionofexternalAVdevicesuchasportableTVthroughtheAUDIOOUTandVIDEOOUTport.
1.ConnecttheAUDIOOUTandVIDEOOUTportatthebackofheadunittotheLINEINofexternalAVdevice.
2.PressandholdMODE.SelectDISC,USBorSD/MMCsource.
3.PressDUALkeyonremotecontroltoselectwhichmodeyouwanttocontrol.
 T=TUNER,C=CARD,U=USB
Note: You will need to connect an external portable TV or monitor when using this feature. After selecting the
function (T/C/U), adjust the volume through volume knbo (2).
VIEWING PHOTO
1. Insertdisc,USBmemorystickorSD/MMCcardcontainingpictureleformat.
2. Usingremote( / ),selectPHOTOfunctionandpressEnter.
3. Usingremote( / ),selectaletoviewandpressEnter.
4. Duringphotoplayback,touchanywhereonscreentobringuprotatefunction.Thisfunctionallowsuserto
rotatepictureup/down/left/rightbytouchingtherespectivebuttononscreen.
Note: Press Menu on remote control to exit photo playback.
Press Menu on remote control will also go back one level or return to previous menu.
RESET
Resetbuttonisplacedonthehousing.Toreset,useasharppointobjectandpressandholdtheRESETbutton
for2seconds.
Theresetbuttonistobeactivatedforthefollowingreason:
• Initialinstallationoftheunitwhenallwiringiscompleted.
• Allthefunctionbuttonsdoesnotoperate.
• Errorsymbolonthedisplay.
LISTENING TO RADIO
Band (BD)
Pressingthiskeyrepeatedlywilltogglecyclicallybetweeneachband.FM1---FM2---FM3.
Automatic or Manual tuning (SEEK UP / SEEK DN)
Whenpressedshort,thesekeysareoperatedasMANUALtuningmode.
Whenpressedlongerthan1sec.,theyareoperatedasAUTOMATICtuningmode.
Auto Seek/Preset scan (AS/PS)
Preset Scan (PS) -Bypressingshortly,theradioplayseachpresetstationfor5seconds.
Auto Seek (AS) -Bypressinglongerthan1sec,autoseekisactivated.The6strongeststationsarepreset
andstoredinthecorrespondingpresetnumber.WhenAutoSeek
operationisnished,theradioexecutesthepresetscan.
Storing and Recalling Frequencies
IfyoupressanyoftheNUMBER(1-6)youcaneasilystoreupto
sixbroadcastfrequenciesforlaterrecallwiththetouchofabutton.
1.ChooseadesiredBAND.
2.Whenyoundafrequencythatyouwanttostoreinmemory,
pressaNUMBER(1-6)andholduntilthepresetnumbershows
andlitinthedisplay.
3.Theselectedradiostationfrequencyhasbeenstoredinmemory.
ThenexttimeyoupressthesameNUMBER(1-6)theradiostation
frequencyisrecalledfrommemory.
Note: Up to 18 FM stations can be stored in the memory.
USING THE RDS FUNCTION
What is RDS?
TheRDS(RadioDataSystem)isadigitalinformationsystemdevelopedbytheEBU(EuropeanBroadcastUnion).
Piggy-backedonnormalFMbroadcasts,RDSoffersavarietyofinformationservicesandautomaticretuning
functionsforRDS-compatiblecarstereos.In1988,RDSbecameavailableintheUnitedKingdom,France,West
Germany,IrelandandSweden.
PresetMemoryStation1-6
CurrentlyTunedStation

EN9
‘AF’ Function (Alternative Frequencies)
- Whenpressedshort,AFswitchingmodeisselected.
- TheradiochecksthesignalstrengthoftheAFallthetime,whenitbecomestooweak,theunitdetectsffrom
theAFsignalonwhichfrequenciesitmustsearchforabettertransmitter.
‘TA’ Function (Trafc Announcement)
Whenpressedshort,itisactivatedasTAmodeonoroff.WhenTAmodeisonandtrafcannouncementis
transmitted.
– WhentheunitisitCD/MP3mode,itwillswitchtoradiomodetemporarily.
– Ifthevolumelevelwasunderthethresholdpoint,itwillberaisedtothethresholdpoint.
‘PTY’ Function (Program Type)
1.PressandholdPTY buttontoturnONProgramtype.
2.RotateVOLknobtoselectprogramtype.
3.Oncedesiredprogramshows,simplypress PTYbuttononcemoreand unitstartsearchingforavailable
stations.
Note: Program type will ash when searching for stations.
OPERATIONS COMMON FOR CD/MP3/WMA/VCD/DVD/MP4
Search Previous / Next Folder
DuringMP3playback,pressandholdFL-/FL+buttontogotoprevious/nextfolder.
Note: Disc / media sources must contain folder name for this function to work.
Specifying particular track
Duringplayback,alltracklenamesunderafolderwillbedisplayedonthescreenwiththeircorrespondingtrack
number.Youcanusethenavigationkeypadontheremotecontroltoaccessthele.
Tips:
To select track 3, press 3.
To select 13, press and hold 10+ follow by 3.
To select 23, press and hold 10+ (2 times) follow by 3.
Random Playback
PressRDM duringplaybacktoplaythetracksinrandom/shufeorder.Pressitagaintocancel.
Tips: RDM is SHUFFLE on screen.
Stopping Playback
1. PressStoponremotecontrolduringplaybacktostopplayback.Thatpositionisstoredinmemory.
2. Press tocontinue.Playbackstartsfromthepositionatwhichitwasstopped.
3. Topermanentlystopplayback,pressStopbuttontwice.
Note: There is no STOP function in audio playback. Audio playback uses function.
Fast Forward / Fast Reverse
1. Duringplayback,pressandhold or .Unitscansatthespeedofx2-x4-x8-x16-x20
2. Toresumenormalplaybackatadesiredpoint,press .
Note: No sound is played during fast forward / fast reverse.
Finding the Beginning of Tracks
Duringplayback,press or .
:Presstostartplaybackfromthebeginningofthepreviouschapterortrack.
:Presstostartplaybackfromthebeginningofthefollowingchapterortrack.
Pause Playback
Duringplayback,press .Pressagaintoresumeplayback.
A-B Repeat Playback
ThisfeatureallowsyoutoloopplaybackasectionofthemoviestartingfromPointAtoB.
1.Pressthe buttontoplaythemovie.
2.Onceyouhavelocatedthesectionyouwishtoplaybackonlooprepeat,pressandholdA-B button.Youwill
see“Rep-A” onthescreen.
3.Letthemovieplayonuntilyouhavereachedtheendofthesectionyouwishtowatchoncontinuousloop.
Onceyouhavereachedthispoint,pressandholdA-B buttonagain.“Rep-A-B” willappearonyourscreen.
PlaybackwillnowstartfromPointA–B.
4.TostopA-Brepeatplayback,pressandholdA-B buttononcemoreuntil“Rep-A-B” disappearsandnormal
playbackresumes.

EN10
Displaying information (OSD)
During playback, you can see all DVD disc information and current play settings. Display will show related
playbacktime,elapsetime,titlenumber,chapternumberandotherinformation.
1.PressOSD ontheremotecontrolonce.Unitwilldisplaytheplaytimeandthediscelapsetime.
2.Pressitoncemoreandallothersettingsinformationwillbedisplayed.
LISTENING TO CD/MP3/WMA
FolderName Tracklenames PlayerFileInfo
Tips: When folder menu is activated, pressing /button on front panel will toggle between MUSIC /
PHOTO / VIDEO options while pressing SEEK-/SEEK+ on remote will display the les found on next page.
Intro Playback (Audio CD only)
PressINTduringplaybacktoplaytherst10secondsofeachtrack.
Repeat tracks
Youcanchoosebetweenrepeatplaybackofasingletrackoralltracks.
1.PressRPT ontheremotecontrolduringplayback.
2.Everytimeyoupressthisbutton,theunitswitchestothefollowingsettings:
Repeat 1
ALL
–Repeatthecurrentplaybacktrack.
Repeat Folder -Repeatthecurrentlyplayedfolder.
Repeat
1
ALL –Repeatallfoldersandtracks.
Repeat -Turnoffrepeat.
TITLE
Duringmusicplayback,pressTITLEonremotetoreturntoaudiolelists.
AUX IN
Anexternalaudiosource(e.g.portableMP3player)canbeconnectedtotheAUX
INsockettobeplayedbackbythevehicleloudspeakers.
1.ConnecttheAUXINsocketwiththeaudiooutputoftheexternaldevice.
USB/SD/MMC Memory Card
Thedeviceis equipped with a USB interface andamemorycard reader for SD/
MMCcards.MP3orWMAlesstoredonthesemediacanbeplayed.
Note:
- Due to the great variety of devices with USB and SD/MMC card interfaces that
sometimes have manufacturer-specic functions, we cannot guarantee that all
media will be recognized and that all operational functions will be available with
this device.
- You cannot operate USB hard drives on the device.
- It maybe necessary to turn the ash memory ON so that it can be read.
1.PlugyourUSBstoragemediumintotheUSBport.
2.Ifyouuseamemorycard,insertitintothememorycardreader.
3. Theplayerautomaticallyswitchestotheinputusedandstartsplayback.
4.Seethesectiononoperationscommonforaudio/videolesonhowtocontrolUSBormemorycardplayback.
PLAYING DVD/VIDEO CD/MP4
Playback
1.Insert adisc.When the discoffersamenu, themenuis displayed. Whena disc alreadyinserted,press
MODEtoswitchtodiscmode.
2.On DVDs and video CDs with playback control (PBC), menu screens may appear automatically. If this
happens,performtheoperationdescribedbelowtostartplayback.
USBPORTAUXIN

EN11
CAUTION: MakesurethattheVideoTVsystemsettingsissetcorrectlyaccordingtoyourdiscyourplaying.If
youarenotsure,leaveitsetto“Auto”.ImpropersetupofTVsystemmightcausethevideotostop/skip/pause
playingalthoughaudiomightcontinuetoplay.YoucansetupvideoTVsettingsusingtheSETUP featureofthe
remotecontrol.Referto“SETTING UP THE DVD PLAYER” section.
DVD menu
Press , , , toselectthedesireditem,thenpressEnter.
Video CD menu
Usethenumberkeys(“0”to“9”)toselectthedesirednumber,thenpressEnter.Themenuscreendoesnot
appearwhenthePBCfunctionisturnedoff.Inthiscase,pressandholdbuttontoturnonPBCfeature.
Turning PBC ON/OFF (VCD only)
PBC(PlaybackControl)isafeaturefoundonVCD2.0andSVCD1.0.PBCallowscontroloftheplaybackof
playitemsandthepossibilityofinteractionwiththeuserthroughtheremotecontrolorsomeotherinputdevice
available.Ifit’son,theplayerwon’tautostartafterinsertingthediscbecauseitwilltaketimetoselectprogram
ondisc;ifit’soff,theplayerwillautoplaybacktheprogramondisconebyone.
1.ToturnONPBCfunction,pressPBC ontheremotecontrol.ToturnOFF,pressthebuttonagain.
Note: Not all VCD/SVCD disc have PBC functions.
Repeat Playback
FOR VCD
1.PressRPT ontheremotecontrolduringplayback.
2.Everytimeyoupressthisbutton,theunitswitchestothefollowingsettings:
Repeat 1 –Repeatthecurrentplaybacktrack.
Repeat All –Repeatallfoldersandtracks.
Repeat Off –TurnrepeatfunctionOFF.
Note: PBC feature in VCD disc needs to be STOP in order to use Repeat playback.
FOR DVD
Youcanchoosebetweenrepeatplaybackofatitleorchapter.
1.PressRPT ontheremotecontrolduringplayback.
2.Everytimeyoupressthisbutton,theunitswitchestothefollowingsettings:
Repeat Title –Repeatthecurrentplaybacktitle.(PressandholdRPT button)
Repeat Chapter –Repeatthecurrentplaybackchapter.
Repeat All –Repeatallfoldersandtracks.
Repeat Off –Turnrepeatoff.
Searching for particular track using GOTO
YoucanusetheGOTOfunctiontosearchforadesiredtracknumberorparticularpointofatracktoplay.
1 PressGOTO ontheremotecontrolduringplayback.Timeandtracknumbersearchappears.
2 Entertheminutesandsecondsforthecurrentlyplayedtrackifyouwanttosearchbytime.PressEnter.
3 Entertracknumberifyouwanttosearchbytracks.PressEnter.
Changing audio language during playback (Multi-audio)
DVDscanprovideaudioplaybackwithdifferentlanguagesanddifferentsystems(DolbyDigital,DTSetc.).With
DVDsfeaturingmulti-audiorecordings,youcanswitchbetweenlanguages/audiosystemsduringplayback.
VCDcanprovidedifferentaudiolanguagesusuallydividedintoleftandrightchannels.
1.Tochoosedifferentaudio,simplypressAudio ontheremotecontrolrepeatedlyduringplayback.
Note:
- With some DVDs, switching between languages/audio systems may only be possible using a menu display.
- You can also switch between languages/audio systems using SET-UP MENU or tap the screen then press
Audio.
Changing the subtitle language during playback
(Multi-subtitle) – (DVD only)
WithDVDsfeaturingmulti-subtitlerecordings,youcanswitchbetweensubtitlelanguagesduringplayback.
1.PressSub-T ontheremotecontrolduringplayback.Pressrepeatedlyuntilthesupporteddesiredsubtitle
appears.
Note:
• With some DVDs, switching between subtitles may only be possible using a menu display.
• You can also switch between subtitles using SET-UP MENU or tap the screen then press Subtitle.
Changing the viewing angle during playback (Multi-angle) – (DVD only)
WithDVDsfeaturingmulti-angle(scenesshotfrommultipleangles)recordings,youcanswitchamongviewing
anglesduringplay-back.
1. PressandholdAngle ontheremotecontrolduringplaybackofascene.

EN12
Title (DVD only)
DuringDVDplayback,pressTitle onremotecontroltoreturntoFIRSTtitle.
Return to Root Menu (DVD only)
DuringDVDplayback,pressandholdMENUonheadunitorremotecontroltoreturntorootmenu.
Note: Some DVD may not contain root menu.
Slow motion playback
Thisfeatureletsyouslowdownplayback.
1.PressSlow ontheremotecontrolduringplayback.
2.Pressingitrepeatedlywillswitchyoutothefollowingsteps:1\2-1\3-1\4-1\5-1\6-1\7.
Note:
• To resume normal playback, press PLAY/PAUSE ( ).
• There is no sound during slow motion playback.
• With some disc, slow motion may be unclear during slow motion playback.
Zooming in During Playback
Youcanzoominintothepictureduringplayback.
1.PressZOOM ontheremotecontrolduringplayback.
2. Everytimeyoupressthisbutton,theunitwillzoom2-3-4-1/2-1/3-1/4timesandOFF.
Frame-by-frame playback
Thisletsyoumoveaheadoneframeatatimeduringplayback.
1. EachtimeyoupressandholdStepbuttononremotecontrol,youmoveaheadoneframe.Toreturntonormal
playback,press .
PAL / NTSC (P/N)
PressandholdP/N buttontoswitchbetweenPAL,NTSCsystem.
CUSTOMIZING AUDIO / VIDEO SETTINGS
AUDIO SETUP
1. Press VOL knob to enterAUDIO setup. Selected item will be highlighted. You can set BASS, TREBLE,
BALANCE,FADER,TAVOLUME.
2. Press / buttontoselectitem.RotateVOLknobtomakeadjustments.
3. PressVOLknobtoexitsettings.
VIDEO SETUP
1. PressandholdVOLknobtoenterVIDEOsetup.Selecteditemwillbehighlighted.YoucansetBRIGHTNESS,
CONTRAST,SATURATION,HUE,SHARPNESS.
2. Press / buttontoselectitem.RotateVOLknobtomakeadjustments.
3. PressandholdVOLknobtoexitsettings.
Note: Depending on model’s feature, some items may not show on screen.

EN13
SETTING UP THE DVD PLAYER
Youcanexiblycustomizetheunittosuityourpreference.Youcansetthelanguageandothervideoandaudio
settingssowhenplaybackstartsitwillalwaysuseyourpreferredsettings.
Important:
1.Loadanydiscintotheunitbeforeyoucanaccessthesetup.
2.PressSetup ontheremotecontrol.
3.Use( / )toreturn/entercategory.
Setting Rating Password
1 Press Setupontheremotecontrol.
2 UsingNavigationkeysselectSystem Setup > Password andpressEnter.
3 Enterthedefaultpassword‘0000’andpressEntertounlockrstandthenenternew4digitpasswordand
pressEnter.Theunlocklogowillswitchtolockindicatingpasswordhasbeenset.
Note:
- The default password is ‘0000’.
- In case you forgot your password, you can use the master password ‘0000’ to unlock and reset the
password.
- Master password will only work while SETUP button is press during playback.
Settings
SystemSetup
LanguageSetup
VideoSetup
Category
TVSystem
AutoPlay
TVType
Password
Rating
Default
OSDLanguage
AudioLanguage
SubtitleLanguage
MenuLanguage
MPEG4Language
Brightness
Contrast
Hue
Saturation
Sharpness
Options
NTSC,PAL,AUTO
ON,OFF
4:3PS,4:3LB,16:9
Setuppassword
Setupratinglevel
Restoretofactorysettings
Selectpreferredoptionsappearonscreen
Usenavigationkeysonremotecontroltosetup
desiredlevel.

EN14
TECHNICAL SPECIFICATIONS
CD/MP3/WMA PLAYER SECTION
SignaltoNoiseRatio >60dB
ChannelSeparation >50dB(1kHz)
FrequencyResponse 20Hz-20kHz
TUNER (FM)
FrequencyRange 87.5-108MHz
ChannelStep 50kHz
Sensitivity 2.8µV
StereoSeparation 30dB
SignaltoNoiseRatio 50dB
LINE-OUT
Output 750mV
Impedance 10kOhm
GENERAL
PowerSupply 12VDC(10.8-15.6Vallowable)
Speaker Impedance 4 or 8 Ohm
Outputpower 35Wx4CH
Fuse 10A
Note: Specicationandthedesignaresubjecttopossiblemodicationwithoutnoticeduetoimprovements.
Electric and electronic equipment and included batteries contains materials, components and substances that can
be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This
symbol signies that electric and electronic equipment and batteries should not be disposed of with other household
waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner
you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be
submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional
information is available at the technical department of your city.
ALLRIGHTSRESERVED
COPYRIGHTDENVERELECTRONICSA/S
www.denver-electronics.com