Denver SW-151MK2 User manual

Smart Bracelet
User Manual
SW-151MK2
facebook.com/Denver.eu

1.This product is not a toy. Keep it out of reach of children.
2.Warning: This product includes lithium polymer battery.
3.Keep product out of the reach of children and pets to avoid chewing and swallowing.
4.Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius.
Under and over this temperature might affect the function.
5.Never open the product. Repairs or service should only be performed by qualified personnel.
6.Do not use for water depth below 1 meters!
7.Please remove the Smart watch from arm in case of any leakage or excessive heat from the product
to avoid burns or rash.
8.Using other accessories than the ones delivered with the product can cause abnormal functionality.
Please read the safety instructions carefully before using the product for the first
time and keep the instructions for future reference.
Safety information
IMPORTANT! BPM-Heart Rate-Blood Oxygen app measurements are
not intended for medical use, including self diagnosis or consultation with
a doctor, and are only designed for general fitness and wellness purposes.
This is not a medical diagnostic device.
ENG-1

1. Compatible System of Phone and BLE Version:
Android 4.2 and above iOS 8.0 and above BT4.0
2. User Preparation
Please make sure the device is fully charged before using for the first time.
3. “Fit pro” APP Download
Scan the QR Code
Download the APP from the
4. Bracelet Connection
First, long press the touch button to turn on the bracelet, and make sure the Bluetooth on
your phone is on; Second, open the APP; tap the Function List on the top
ENG-2
“Fit pro”
“Fit pro”
APP STORE / GOOGLE PLAY STORE
CHARGING INSTRUCTION
USB
PLUG
It is easiest by
pulling sideways
Strap ans case separatlyUSB Charging port is placed
behind the top strap
Please insert it into USB port
to charge & pay attention
to the USB plug direction

left corner; tap the APP icon and “Search”; choose the right bracelet MAC number. Finally
once “Bluetooth pairing request” pops up, tap “Pair” to connect.
5. Bracelet Operation
6. Function Instruction
Home Display: show Time, Date,
Battery Level, etc;
Pedometor: 24 hours recording on the
bracelet; clear bracelet data at 24:00; view
history in the APP.
·
ENG-3
When the bracelet is successfully connected with the phone, the
bracelet will synchronize the phone’s time and date. And the APP
will synchronize the bracelet’s sports data, heart rate monitoring
data, blood pressure data, etc. Short press the bracelet touch
button to switch the functions, long press the touch button for
entering the functions. To switch the watch off, enter the “OFF”
menu and hold down the touch button for 3 seconds. To turn the
watch on, press the touch button for 3 seconds.

Exercise: counts your daily exercise time;
clear data at 24:00; view history in the APP.
Heart Rate Monitor: automatically measures
the heart rate when the function is turned on,
and the heart rate data will be saved in the
APP.
SPO2Test: automatically measures the SPO2
rate when the function is turned on, and the
SPO2rate data will be saved in the APP.
Blood Pressure:
automatically measures blood pressure when
the function is turned on, and the blood
pressure data will be saved in the APP.
Smart Clock: find “Smart Clock” in the APP and set the time. Tap the time, you can set
the repeat mode, and tap Complete to save the settings. The bracelet will vibrate when
the set time is reached.
·
·
·
·
·
ENG-4