Detecto AP-10 Reference guide

National Conference on Weights and Measures
15245 Shady Grove Road, Suite 130 • Rockville, MD 20850
Certificate Number: 95-087A1
Page 1 of 2
National Type Evaluation Program
Certificate of Conformance
for Weighing and Measuring Devices
This device was evaluated under the National Type Evaluation Program (NTEP) and was found to comply with the applicable technical requirements of
Handbook 44, "Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices." Evaluation results and device
characteristics necessary for inspection and use in commerce are on the following pages.
This device was evaluated under the National Type Evaluation Program (NTEP) and was found to comply with the applicable technical requirements of
Handbook 44, “Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices.” Evaluation results and device
characteristics necessary for inspection and use in commerce are on the following pages.
Effective Date: October 4, 1996
Louis E. Straub G. Weston Diggs
Chairman, NCWM, Inc. Chairman, National Type Evaluation Program Committee
Issue date: November 18, 1996
Note: The National Conference on Weights and Measures does not "approve", "recommend", or "endorse" any proprietary product or material, either as a
single item or as a class or group. Results shall not be used in advertising or sales promotion to indicate explicit or implicit endorsement of the product or
material by the NCWM.
This is a reissuance by the NCWM of a Certificate of Conformance already issued by the National Institute of Standards and Technology.
Submitted by:
Cardinal Scale Mfg. Co.
203 E. Daugherty
Webb City, MO 64870
Tel: [phone]
Fax: [phone]
Contact: Stephen Langford
For:
Bench Scale
Electronic
Model: AP Series
nmax: 4000; emin: See Below
Capacity: See Below
Platform: See Below
Accuracy Class: III
Standard Features and Options
Semi-automatic, automatic, and initial zero-setting mechanisms Semi-automatic tare
Battery power supply with sleep and automatic shut-off modes Gross/net display
Pound/kg conversion
Model Capacity and Division (d) Platform Size (in)
AP-4K 4000 g x 1 g 6.75 x 5.25
AP-4KD 4000 g x 1 g 6.75 x 5.25
AP-4KDEX 4000 g x 1 g 6.75 x 5.25
AP-4KEX 4000 g x 1 g 6.75 x 5.25
AP-6 99.95 oz x 0.05 oz 6.75 x 5.25
AP-6EX 99.95 oz x 0.05 oz 6.75 x 5.25
AP-6PH 99.9 oz x 0.1 oz 6.75 x 5.25
AP-8 8.000 lb x 0.002 lb 6 x 9
AP-10 9.995 lb x 0.005 lb 6.75 x 5.25
AP-10CG 9.99 lb x 0.01 lb 6.75 x 5.25
AP-10K 9995 g x 5 g 6.75 x 5.25
AP-10KEX 9995 g x 5 g 6.75 x 5.25
Temperature Range: -10 ˚C to 40 ˚C (14 ˚F to 104 ˚F)

Certificate Number: 95-087A1
Page 2 of 2
Cardinal Scale Mfg. Co.
Bench Scale
Model: AP Series
Application: General purpose weighing.
Identification: The identification badge is on the side of the scale.
Sealing: The device can be sealed with a physical seal.
Test Conditions: This certificate supersedes Certificate of Conformance (CC) No. 95-087 and is issued without additional
testing to correct the omission of the Model AP-8 and the declaration of platform sizes. The test conditions for the
previous certificate are listed below for reference.
Certificate of Conformance Number 95-087: The emphasis of this evaluation was on device design, performance, and
compliance with influence factors. The Models AP-10K, AP-4K, and AP-8 were tested. These devices were tested
over a temperature range of -10 ˚C to 40 ˚C. In addition, a permanence test was conducted on the AP-8 during which
the device was tested periodically. The device was also tested over a voltage range of 100 VAC to 130 VAC.
The results of these evaluations indicate that the devices comply with the applicable requirements of NIST Handbook
44.
Type Evaluation Criteria Used: NIST Handbook 44, 1996 Edition
Tested By: Milton G. Smith (Canada, LMB)
Information Reviewed By: C. V. Cotsoradis (NIST) (95-087); L. T. Sebring (NIST) (95-087A1)