Detex ES500 Series User manual

02/28/18
Designed Security, Inc.
www.dsigo.com * [email protected]
Access Control 26
Access Control > Battery Operated Exit Alarm > ES500 Series
The ES500 Series Exit Alarm is designed for applications that require an alarmed exit device
on secured doors. The alarm, with approximately 100dB, will sound when an unauthorized exit
occurs. The ES500, with its redesigned shape and smaller size make it the choice for quick and
easy installations on emergency exit and restricted doors.
• Low cost, self-contained door alarm
with piezo horn that sounds to warn of
unauthorized use of a door
• Secure, tamper resistant housing
• Quick, easy installation saves time and
money
•Low cost, self-contained
door alarm with piezo
horn that sounds to warn
unauthorized use of a
door
•Surface door mount
(factory standard) or
wall mount with external
magnetic switches. Easy
to install using ordinary
tools.
•Patented plastic template
allows for foolproof
alignment of internal
magnetic door contact and
an accurate installation
•Alarm can only be
silenced by proper control
key
•Rim cylinder required for
outside key control
•Now available with Àeld
selectable options
•Tapered cover allows for
installation on narrow
stile doors, 2” minimum.
•An intelligent circuit that
automatically senses the
“handling” of the alarm
location on the door
•Patented cam assembly
automatically adjusts for
different sizes of cylinders
without the use of spacers
•Mortise cylinder required
with standard Yale cam
for inside key control
•Upgraded features are
now included and Àeld
selectable
•Improved electronic
circuits for longer battery
life, LED functions
•Tamper resistant housing
with cover lock, protects
electronics and battery
from manipulation
•Extended bypass, now a
standard feature, allows
alarm to remain bypassed
when door is open and
automatically rearm upon
door closing
•Custom settings may be
ordered and programmed
at the factory
•UL Listed (see listings &
approvals)
BeneÀts
Shown with mortise cylinder
(cylinder sold separately - add xMC65 to
order the ES500 with mortise cylinder)

02/28/18
Designed Security, Inc.
www.dsigo.com * [email protected]
Access Control > Battery Operated Exit Alarm> ES500 Series
Access Control 27
Riser Diagram
Dimensions
Left Side Mounting Right Side Mounting
Technical SpeciÀcations
•Approximate 100 dB piezo alarm
•Mortise cylinder key switch arming
•9 VDC battery powered
•Low battery alert
•Manual arming, disarming & rearming
•LED visual arming indicators
•Audible arming indicators
•Outside key control compatible
•Fits 2” narrow stile doors
•Alarm accepts 5, 6 and 7 pin standard
and interchangeable core mortise
cylinders with a standard Yale cam
•Field selectable 2-minute auto rearm
•Field selectable status indicators
Operation
•To arm: Insert and rotate the key counter
clockwise. Red LED will Áash twice followed
by solid green LED. Remove key, green LED
will continue to illuminate for 15 seconds
during the arming sequence followed by 3
chirps indicating the alarm is armed and
ready
•To disarm: Insert and rotate the key
clockwise Green LED Áashes twice. Key
may be removed. Alarm is now disarmed
and will not sound.
Finish
• GY - Grey
Options/accessories
•K5 mortise cylinder pre-
installed at factory (add
xMC65)
•Recessed or surface mount
door contacts
•Cylinder nut wrench
“UL Listed Miscellaneous
Fire Door Accessory”
ANSI/BHMA
A156.29
Listings and Approvals