DEVA Broadcast DB6000-STC Instruction manual

DB6000-STC
Advanced Stereo and RDS Generator
BS412 Compliant
65 Aleksandar Stamboliyski Str., 8000 Burgas, Bulgaria
Tel.: [phone], Fax: [phone]
Email: [email protected], Web: www.devabroadcast.com
Quick User Guide
BEFORE YOU USE THIS PRODUCT
In order to be able to enjoy all the benefits of owning your new
DEVA product, please verify first that the latest software and
firmware release were installed.
Visit www.devabroadcast.com/downloads for the most
recent software and firmware downloads, prior the installation.
DEVA Broadcast Limited is an ISO 9001:2015 certified company.

This Quick user guide will make the installation of DB6000-STC quick and easy. Applying these
principles, you can simplify the process and save yourself extra time and effort. For more information
about the Safety precautions and the Operating environment recommendations please refer to the
User Manual.
Connection
STEP 1
1. Install the unit on its operation place;
2. In order for the proper work of DB6000-STC to be guaranteed, and due to the variability of the signal
levels, the right reference levels of the digital and analog inputs should be set. For further information,
please refer to the complete user manual.
3. Before connecting the AC Power, make sure that the fuse rating is in accordance with the mains
supply at your location. DB6000-STC Power Supply Factory Settings are: 100-240 V AC; 1A Fuse;
4. Configure the DB6000-STC in the proper connection configuration. For further information on the
most common use, please refer to Step 2.
5. If need be, change the default factory preset with the one preferred. This can be made via the front
panel menu or WEB Interface.
ŸVia front panel - press Soft button 4 (from the left to the right), then using the UP and DOWN buttons
select the preferred preset;
ŸVia the WEB interface (for further information on how to access the device via WEB, refer to Step 3)
- connect the device as an administrator, select "Presets" menu, and select the preferred audio preset.
For further information on how to create your own audio preset, or how to set up the Dayprting function,
please refer to the complete user manual.
The DB6000-STC supports several types of configuration connections, depending on the client's
preferences. The two basic connections are described in details below. For the other available
configurations, please refer to the user manual - www.devabroadcast.com/downloads
Configuration
STEP 2
Analog Program
STEP 2.1
DB6000-STC is fed with analog audio. The main
program output is sent to the DB6000-STC via XLR
Connection. The MPX composite output is sent via
BNC connection to the transmitter MPX input. The
audio processor output is MPX OUT -1.
DB6000-STC – Advanced Stereo & RDS Generator
Control Room
ON AIR
BROADCAST CONSOLE
Analog Audio
Output Left-Right
Analog Audio
Input Left-Right
RF Power out for Antenna
MPX IN FM Transmitter
MPX OUT -1
Once the connection process is
completed, connect the AC power
to the unit. Then, using the front
panel menu, navigate to Input >
Input Select > and set Main
Analog input as appropriate for
your installation.
NOTE: It is mandatory (for both configurations - Step 2.1 and Step 2.2) that the cable used for connection
between DB6000-STC's MPX output, and the MPX input of the transmitter be as short as possible. This
will prevent any face distortion.

Digital Program
STEP 2.2
DB6000-STC is fed with AES/EBU digital audio.
The main program output is sent to the DB6000-
STC via XLR Connection. The MPX composite
output is sent via BNC connection to the transmitter
MPX input. The audio processor output is MPX
OUT -1.
There are two options for access to the WEB Interface of DB6000-STC. The first one is through manual
identification of the IP address of the device, and the second one is through the Network discovery option
(For Windows 7 users only).
Manual IP Address Identification
STEP 3.1
1. Connect the device to a local network or to the Internet
by the applied LAN cable. Through the Front panel
navigational menu pressing the “OK” button you will
enable you to enter the device main menu;
2. Using the “Right” navigational button find the “Status”
section located at the end of the Menu;
3. Press the “OK” Button to enter the “Status Section” .
Via the Front panel navigational menu press the
“DOWN” button.This operation will visualize the
screen containing information about the IP Address of
the device;
4. Open a new WEB Browser and enter the device IP
address in the address field then press “Enter”;
5. A window that requires username and password will
appear. Default values being - Username: user or
admin, Password: pass.
NOTE: Due to the inability of some WEB Browsers to read the IP address format displayed on the screen
of the device, the numbers included in the IP Address must be written without the leading zeros.
For example: 192.168.020.068 must be written as 192.168.20.68
WEB Interface Access
STEP 3
DB6000-STC – Advanced Stereo & RDS Generator
RF Power out for Antenna
MPX IN FM Transmitter
MPX OUT -1
Once the connection process is
completed, connect the AC
power to the unit. Then, using
the front panel menu, navigate
to Input > Input Select > and
set Main Digital input as
appropriate for your installation.
Control Room
ON AIR
BROADCAST CONSOLE
Program Output
Digital AES/EBU
Digital Input

1. Open Advanced sharing settings by clicking the Start
button, and then on "Control Panel". In the search box, type
"network", click "Network and Sharing Center", and then, in
the left pane click "Change advanced sharing settings";
2. Select your current network profile;
3. Click Turn on network discovery, and then click Save
changes. If you're prompted for an administrator password
or confirmation, type the password or provide confirmation.
4. To access the device open a new Explorer bar and click on
(1). If you have successfully enabled the network discovery
option, the device will be displayed. Double click on will (2)
open a new WEB browser window requiring username and
password. Default values being - Username: user or admin,
Password: pass.
NOTE: If you have already enabled this function on your
computer just open a new Explorer bar and click on . (1)
The device must be displayed. If not follow the
instructions from Step 3.1 or Step 3.2
Please refer to the User manual for detailed information on
how to configure and explore your device.
Network discovery is a network setting that defines whether your computer can see (find) other computers and devices on
the network and whether other computers on the network can see your computer. By default, Windows Firewall blocks
network discovery but you can enable it.
1
2
A successful log-in in the WEB Interface will look like this:
Network discovery for Windows 7
STEP 3.2