DeWalt DXV20P User manual

DXV20P

9
4
2
EXPRESS WARRANTY
Dear Customer,
Thank you for purchasing this DEWALT Wet & Dry Vacuum Cleaner which has passed through our extensive quality
assurance processes. Every care has been taken to ensure that it reaches you in perfect condition. However, in the
unlikely event that you should experience a problem, or if you require any assistance please do not hesitate to
contact us.
Mayo Hardware PTY LTD (Mayo Hardware) is an authorised DEWALT Importer and Distributor of DEWALT Wet and
Dry Vacuum Cleaner Models, not including DEWALT Dust Extraction Models, in Australia and New Zealand.
These DEWALT Wet and Dry Vacuum Cleaner Models are imported under license from Alton Industries Ltd Group
(Alton) for DEWALT Industrial Tool Company by Mayo Hardware. All warranties relating to DEWALT Wet and Dry
Vacuum Cleaner Models only, are covered in Australia and New Zealand by Mayo Hardware. DEWALT and the
DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof and are used under license
by Alton.
If you have a problem, call customer service; do not return this DEWALT Wet & Dry Vacuum Cleaners to
the place of purchase.
CUSTOMER SERVICE
Australia: 1300 360 211
New Zealand: 09 415 6240
Operating times: Monday – Friday
8am - 5pm Australian Eastern Standard Time (AEST)
EXPRESS WARRANTY STATEMENT - DEWALT Wet & Dry Vacuum Cleaners
You are not required to do anything to register your DEWALT Wet & Dry Vacuum Cleaner purchase. Please attach your
purchase receipt to this manual and ensure both are kept safe. We hope you enjoy your new DEWALT Wet & Dry
Vacuum Cleaner, and if you have any problems call customer service on the above phone numbers. Do not return to
place of purchase.
Mayo Hardware warrants that this DEWALT Wet & Dry Vacuum Cleaners will be free from manufacturing faults or
defects for various periods as noted below, all from the date of purchase, providing original purchase receipt is kept
and shown when needed and is subject to the exclusions and terms and conditions below.
The WarrantyPeriods;
The actual DEWALT Product motor and motor housing are covered by a 3 year service warranty
with exclusions noted in the complete warranty statement.
The actual DEWALT Wet and Dry Vacuum Cleaner poly tub only is covered by a 10 year service
warranty with exclusions noted in the complete warranty statement.
If a warranty fault appears within the warranty period, Mayo Hardware reserves the right to replace or repair the
DEWALT Wet & Dry Vacuum Cleaner. If the event arises that Mayo Hardware chooses to replace the Wet & Dry
Vacuum Cleaner during the any warranty period, then the warranty period is not extended beyond the original
warranty end date as calculated from the purchase date on the original Tax Receipt or purchase receipt. If the
Wet & Dry Vacuum Cleaner includes various accessories or components, only the defective accessory or
component will be replaced or repaired.
Mayo Hardware reserves the right to replace defective parts of the DEWALT Wet & Dry Vacuum Cleaner with parts
and components of similar quality, grade and composition where an identical part or component is not available.
DEWALT Wet & Dry Vacuum Cleaners presented for repair may be replaced by refurbished DEWALT Wet & Dry
Vacuum Cleaners of the same type rather than being repaired. Refurbished parts may be used to repair the DEWALT
Wet & Dry Vacuum Cleaners.
What is covered.
DearCustomer,
Thank you for purchasing this DEWALT Wet & Dry Vacuum Cleaner which has passed through our extensive
quality assurance processes. Every care has been taken to ensure that it reaches youin perfectcondition.
However, in the unlikelyevent that you should experienceaproblem, orifyou require any assistance please do
not hesitate to contact us.
Smart Marketing Group Pty Ltd (SMG) is an authorised DEWALT Importer and Distributor ofDEWALT Wetand
Dry Vacuum Cleaner Models, not including DEWALT Dust Extraction Models, in Australia and New Zealand.
These DEWALT Wet and DryVacuum Cleaner Modelsare imported under license from Alton Industries Ltd
Group (Alton) for DEWALT IndustrialTool Company by SMG. All warranties relating to DEWALT Wetand Dry
Vacuum Cleaner Models only, are covered in Australia and New Zealand by SMG. DEWALT and the DEWALT
Logoare trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof and are used under license by
Alton.
If you have a problem, call customer service; do not return this DEWALT Wet& Dry Vacuum cleaners to
the place of purchase.
CUSTOMER SERVICE
Australia: 1300660 457
New Zealand: 0800 474 876
Operating times: Monday – Friday
8am - 5pm Australian Eastern Standard Time (AEST)
EXPRESS WARRANTY STATEMENT - DEWALT Wet & Dry Vacuum Cleaners
You are not required to do anything to register your DEWALT Wet& Dry Vacuum Cleaner purchase. Please attach
your purchase receipt to this manual and ensureboth are kept safe. We hope youenjoy your new DEWALT Wet
& Dry Vacuum Cleaner, and if you have any problemscall customer service on the above phone numbers. Do not
return to place of purchase. Smart Marketing Group Pty Ltd (SMG) warrants that this DEWALT Wet& Dry
Vacuum Cleaners will be free from manufacturing faults or defects for various periods as noted below, all from the
date of purchase, providing original purchase receipt is kept and shownwhen needed and is subject to the
exclusions and terms and conditions below.
The WarrantyPeriods;
guarantee, with exclusions as noted in the complete warranty statement.
warranty with exclusions noted in the complete warranty statement.
service warranty with exclusions noted in the complete warranty statement.
If a warranty fault appears within the warrantyperiod, SMGreserves the right to replace or repair the DEWALT
Wet & Dry Vacuum Cleaner. If the event arises that SMG chooses to replace the Wet& Dry Vacuum Cleaner
during any warranty period, then the warranty periodis not extended beyond the original warranty end date as
calculated from the purchase date on the original Tax Receipt or purchase receipt. If the Wet& Dry Vacuum
Cleaner includes various accessories orcomponents, only the defective accessory orcomponent will be replaced
or repaired.
SMGreserves the right to replace defective parts of the DEWALT Wet& Dry Vacuum Cleaner with parts and
components of similar quality, grade and composition where an identical part orcomponent is not available.
DEWALT Wet&Dry Vacuum Cleaners presented for repairmay be replaced by refurbished DEWALT Wet& Dry
Vacuum Cleaners of the same type rather than being repaired. Refurbished parts may be used to repair the
DEWALT Wet&Dry Vacuum Cleaners.
What iscovered.

Unlock
16
Call customer service, Australia: 1300 360 211 or New Zealand: 09 415 6240
EXPRESS WARRANTY
How to claim under this warranty
Ensure you have the following: Original purchase receipt, Model of DEWALT Wet & Dry Vacuum
Cleaner, serial number of DEWALT Wet & Dry Vacuum Cleaner.
If the issue cannot be rectied over the phone, the vacuum is to be taken to an authorised service
agent. Mayo Hardware’s customer service will advise which authorised service agent to take the
DEWALT Wet & Dry Vacuum Cleaner to, provided the issue is covered under warranty.
DEWALT Wet & Dry Vacuum Cleaners purchased from an unauthorised DEWALT reseller, including
on-line trading companies or individuals (e.g. Trading Post, Amazon, eBay etc) that are not
authorised DEWALT resellers in Australia, New Zealand.
DEWALT Wet & Dry Vacuum Cleaners purchased outside of, or parallel imported into, Australia or
New Zealand.
The customer service agent will attempt to diagnose the problem over the phone.
What is not covered, for a full list please read the complete warranty statement.
cleaning regularly.
CONTACTDETAILS
Mayo Hardware PTY LTD
Australia: 1300 360 211
New Zealand: 09 415 6240
[email protected]

3
Fig. A
Fig. B Fig. C
Fig. D Fig. E
10
3
12
1
8
10
3
12
7
5
6
11
13
4
9
4
2

4
Fig. F Fig. G
Fig. H
Fig. J
Fig. I
14
16
15
Unlock

5
English
DEFINITIONS: SAFETY GUIDELINES
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
each signal word. Please read the manual and pay
attention to these symbols.
DANGER:Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
WARNING:When using electric appliances, always
follow basic safety precautions to reduce the risk of
the following:
WARNING: To reduce the risk of electric shock.
Do not expose to rain. Store indoors.
CAUTION: This appliance is not intended for use
by people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
• Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
• Do not use to vacuum combustible explosive
combustible materials.
• Do not use to vacuum hazardous, toxic or
carcinogenic materials,such as asbestos or pesticide.
• Never pick up explosive liquids (e.g. gasoline,diesel
fuel, heating oil, paint thinner, etc.), acids or solvents.
• Do not leave the appliance when it is connected to a
power source. Unplug it from outlet when not in use
and before servicing.
• Do not allow the appliance to beused asa toy. Pay
close attention when the appliance is used by or near
children.
• Use this appliance ONLY as described in the manual.
Use only DEWALT recommended attachments.
• Do not use this appliance with a damagedcord or
plug. If the appliance is not working correctly, or if it
has been dropped, damaged, left outdoors, or
dropped in water, return it to a service center.
• Do not pull orcarry this appliance by the cord, use
the cord as a handle,close a door on the cord, or
pull the cord around sharp edges or corners. Do not
run the appliance over the cord. Keep cord away
from heated surfaces.
• Do not unplug this appliance by pulling on the cord.
To unplug, grasp theplug, not the cord.
• Do not handle the plug orappliance with wet hands.
• Do not put any objects into the openings of the
appliance. Do not use the appliance with any
opening blocked; keep free of dust, lint, hair and
away from the openings and moving parts.
• Turn off all controls before unplugging the appliance.
• Use extra care when cleaning on stairs.
combustible liquids,such as gasoline, or use inareas
•Static shocksare possible in dry areas or when the
relative humidity of the air is low. This isonly
temporary and does not affect the use of the vacuum.
To reduce the frequency of static shocks, add
or use hose (standard on some models).
• To avoid spontaneous combustion, emptythedust tank
after each use.
BEFORE USING THIS APPLIANCE, READ AND
FOLLOW ALL INSTRUCTIONS.
ADDITIONAL SAFETY RULES
PRODUCT SPECIFICATIONS
PACKAGE CONTENTS
The package contains:
1 48mm x 2.1m Hose
2 Extension Wands
1 Crevice Nozzle
1 Utility Nozzle
1 Floor Nozzle
1 Mesh Accessory Bag
1 Disposable Dust Bag
1 Clean Connect Filter
1 Instruction Manual
1Screw Package
4Casters
• Check for damage to the tool, parts or accessories
which may have occurred duringtransport.
• Take thetime tothoroughly read and understand this
manualprior to operation.
TM
Power 240V / 50Hz / 1050W
15Kpa
20
L
48mm x 2.1m
H05RN-F,2C×0.75mm²/ 3.05m. Length
Seal pressure
37.8L/S
Tank capacity
Hose
Power cord
Model DXV20P
Air ow
Noise Level ≤ 80dBA

6
English
WARNING:
WARNING:
• TO REDUCE THE RISK OF INJURY, USER MUST
READINSTRUCTIONMANUAL. DO NOT LEAVE
THE VACUUM UNATTENDED WHEN IT IS
SWITCHED ON. DO NOT PICK UP FLAMMABLE,
COMBUSTIBLE OR HOT MATERIALS. DO NOT
USE AROUND EXPLOSIVE DUST,LIQUIDS OR
VAPORS. ELECTRICAL DEVICES PRODUCE ARCS
OR SPARKS WHICH CAN CAUSE FIRE OR
EXPLOSION. DO NOT USE AT FILLING STATIONS
OR ANYWHERE GASOLINE IS STORED OR
DISPENSED. DO NOT VACUUM TOXIC OR
CARCINOGENICMATERIALS OR OTHER HEALTH
ENDANGERING MATERIALS SUCH AS ASBESTOS
OR PESTICIDES. ALWAYS USE PROPER EYE AND
RESPIRATORY PROTECTION. TO REDUCETHE
RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE
TO RAIN.STORE INDOORS. WHEN SERVICING,
USE ONLY IDENTICAL REPLACEMENT PARTS.
NOT TO BE USEDAS A STEP STOOL.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
UNPACKING & SETUP SUMMARY
1. Pull lid latches in an outward motion, remove power
head and some accessories that may have been
shipped in the tank.
2. Attach heavy-duty rubberized casters following the
instructions in this manual.
3. Before replacing power head,refer to this manual to
cleaning operation.
4. Replace power head, and apply pressure with thumb
to each latch until it snaps tightly in place. Make sure
all lid latches are clamped securely.
5. Insert the end of the hose into the inletof the tank.
6. Attach the extension wands to the end of the hose.
ON MOTOR HOUSING :
as described under WETPICK UP APPLICATIONS.
• Some wood contains preservatives whichcan be
toxic. Take extra care to prevent inhalationand skin
contact when working with these materials. Request
and follow any safety information available from the
material supplier.
• Do not use vacuum as astep ladder.
• Do not place heavy objects on vacuum.
• An extension cord must have adequate wire size for
safety.
• If an extension cord is to be used outdoors itmust
be marked.
To reduce the exposureto these chemicals, wear
approved safetyequipment such as dust masks that
WARNING:
explosive dust in the air. Flammable gases orvapors
cleaners, oil-based paints, gasoline, alcohol oraerosol
sprays. Explosive dusts include but are not limited to:
coal, magnesium, aluminum, and grain or gun powder.
combustible liquids or hot ashes. Do not use this vac
To reduce the risk of health hazards from vapors or
dusts, do not vacuum toxic materials.
IMPORTANT SAFEGUARDS
The symbol on the product or packaging indicates that
the product must not be treated as domesticrefuse.
Instead, it should be handed in to a collection point for
the recycling of electricaland electronic components.
By ensuring the product is treated in the right way, this
will help to prevent the negative impact on environment
and health that may result from the product being thrown
away as general waste. For further informationabout
recycling, you should contact the local authorities, refuse
collection service or the sales outletwhere you bought
the goods.
7. Attach one of the cleaning accessories (depending
on the cleaning requirements) to the extension
wands. Twist slightly to tighten the connection.
8. Plug the cord intothe walloutlet. The vacuum is
ready for use.
PROTECTING THE ENVIRONMENT
Separate collection. Products and batteries
marked with this symbol must not be
disposed ofwith normal household waste.
Products and batteriescontainmaterials that can be
recovered or recycled reducing thedemand for raw
materials. Please recycle electrical products and
batteries according to local provisions. Further
information is available at www.2helpU.com

7
English
1Top handle/cord wrap
2Power cord
3
3
On/off switch
4
4
Vacuum head
5
4
5
5
Lid latches
6Dust tank
7
9
7
Hose
8Casters
9Clean connect
TM
10
10
10
7
13
10
12
12
12
Vacuum port
11 Hose strap
12
12
Disposable dust bag
DESCRIPTION (Fig. A)
ASSEMBLY AND ADJUSTMENTS (Fig. A–C)
OPERATION
INSTRUCTIONS FOR USE (Fig. A, D, E)
WARNING: Always observe the safetyinstructions
and applicable regulations.
1. Plug thepower cord into an appropriate outlet.
2. Turn theon/off switch to the ON position ( I ).
3. The DE
with the DEWALT connection system. It allows a
TO CONVERT BACK TO DRY VACUUM
OPERATION (Fig. A)
1. Empty dust tank, refer to TO EMPTY DUSTTANK
instructions.
WARNING : Never modify the power appliance or
any part of it. Damage or personal injury could result.
fast,secure connection between the hose
and power tool.The connector connects
directlyto DEWALT compatible tools or through the
use of an adapter (available from local DEWALT
supplier). If you need Install theadapters, refer to
Fig. E.
NOTE:
attached to the tool outlet before following the steps
below.
OPERATING INSTRUCTIONS
CASTERINSTALLATION (Fig. A, F)
1. Invert the dust tank and install the casters to the
2. Return dust tank assembly upright.
REMOVE/CHANGE USEDDISPOSABLE
DUST BAG (Fig. A)
WARNING: Appropriate personal protective
equipment like dust mask and gloves should be used
while handling used dust bags.
1. Turn off vacuum and unplug cord from outlet.
2. Unlatch lid latches and remove vacuumhead .
3. Pull thedisposable dust bag carefully from vacuum
port.
4. Seal thedisposable dust bag opening tightly when
removing it from the machine.
5. Dispose the disposable dust bag inappropriate
container according tostatutory provisions.
5
4
6
14
14
9
WET PICK UP APPLICATIONS (Fig. A, G)
WARNING: If foam or liquid escapes from the
machine,switch off immediately.
WARNING:Do not usethe machine with this set
up for dust Class L.
the dust tank is full and the sound of the motor will
change at once.
When the motor has a high pitched sound and air/
1. Turn off vacuum and unplug cord from outlet.
2. Unlatch lid latches and remove vacuum
head .
3. Empty contents of dust tank into a suitable container
or drain.
CAUTION: Clean the water level limiting device
regularly and examine it for signs of damage. Refer to
Fig. G.
NOTICE:
water from entering the motor.
Before using the vacuum for wet pick up:
• Ensurethe dust tank is empty and free of excessive dust.
WARNING: Toreduce the risk of injury, turn
appliance off and disconnect appliance from
power source before installing and removing
accessories, before adjusting or changing
set-ups or when making repairs. An accidental
start-up can cause injury.
WARNING: must always be in
place while vacuuming, except as described
under WET PICK UP APPLICATIONSunder
OPERATION
may also need touse an disposable dust bag to
make emptying the dust tankeasier.
1. Install the disposable dust bag ,as shown
in Fig. B.
NOTE: Be carefulnot to tear the bag. Place bag
securely onto vacuumport to provide a tight
seal for maximum dust collection performance.
2. Place thevacuumhead onto the dust tank and
secure it byclosing the lid latches .
3. Insert the end of hose into clip-in hose vacuum
port and tighten the end of hose to the tank.
4
4
5
2. Place dust tank upside down position until dry. DO
NOT use wet dust tankfor drypick up.
3. Place vacuum head on a level surface appliance dry.
TO
INSTALL FILTERS.
5. When dust tank is dryplace the vacuum head
onto the dust tank and secure it by closing the
lid latches .

8
English
33
5
4
9
4
2
1
SHUT DOWN/TRANSPORTATION (Fig. A)
1. Turn on/off switch to the OFF position.
2. Unplug the unit.
3. Store thepower cord wrapping itaround the top
handle/cord wrap as shown.
4. When transporting in vehicles, secure the machine.
MAINTENANCE
The DEWALT appliance has been designed to operate
overa long period of time with a minimum of
maintenance.Continuous satisfactory operation
depends upon proper appliance care and regular
cleaning.
WARNING:To reduce the risk of injury,
turn appliance off and disconnect
appliance from power source before
installing and removing accessories,
before adjusting or changing set-ups or
when making repairs.An accidental start-up
can cause injury.
WARNING:For user servicing, the machine must
be dismantled, cleaned and serviced, as far asis
reasonably practicable, without causing risk to the
maintenance staff and others. Suitable precautions
include,decontamination beforedismantling, provision
is dismantled, cleaning of the maintenance area and
suitablepersonal protection.
• The manufacturer, or an instructed person, shall
perform a technical inspection at least annually,
damage, air tightness of the machine and proper
function of the control mechanism.
• When carrying out serviceor repair operations, all
contaminated items which cannot be satisfactorily
cleaned, are to be disposed of; such items shall be
disposed of in impervious bags in accordance with
any current regulation for thedisposal of such waste.
• For dust extractors it is necessary to provide for an
adequate air change rate L in theroom if the exhaust
air is returned to the room.
NOTE:Refer to national regulations is necessary.
TO REMOVE FILTERS
1. Turn on/off/tool switch to the OFF position(O )
and unplug cord from outlet.
2. Release lid latches and remove vacuum
head from canister. Place vacuum headona
level surface upside down.
the plastic end cover as shown, and carefully remove
from head, ensuring debris does not fall into mounting
hole.
NOTE:
4. If the bottom side of the vacuum headneeds to
be cleaned, use a cloth dampened with water and
mild soapand allowit to dry. Dispose the cloth in an
appropriate container.
NOTE:If there isany doubt on the condition of the
WARNING: Never use compressed air or a brush
If needed, gently tap against a hard surface or rinse with
room temperature water and letair dry. Cleaning of the
maintainmaximum performance and continue to function.
depending on use and care.
TO INSTALL FILTERS
NOTE:
3. Place the vacuum headonto the dust tank and
secure it by closing the lidlatches .
FILTER (Fig. A, H, I)
FILTER CARE
MUST be installed correctly and in good condition.
WARNING:Appropriate personal protective
equipment like dust mask and gloves should be used
15
16
4
5
TO EMPTYDUST TANK(Fig.J)
WARNING:To reduce the risk of injury from
accidental starting, unplug power cord before emptying
the dust tank.
1. Remove the power head assembly of the wet/dry
vac bypulling outward on the lid clips located oneach
side of the vac. Lift off thepower head assembly.
2. Dump the tank contents into the proper waste
disposal container.
BLOWINGOPERATION
WARNING: To avoidinjury to bystanders, keep
them clear of blowing debris.
CAUTION: Weara dust mask if blowing creates
dust which might be inhaled.
CAUTION: To reduce the risk of hearing loss, wear
ear protectors when using the vac/blower for extended
hours orwhen using it ina noisy area.

9
English
STORAGE (Fig. A)
1. Empty dust tank,refer to TO EMPTY DUST TANK
instructions.
2. Clean the vacuum inside and outside. refer
to CLEANING.
FILTER.
4. Store the hoseand the power cord, as
shown in the Fig. A. Place the appliance in
a dryroom and secure it from unauthorised use.
BLOWING FEATURE (Fig.C)
The vacuumcontains a blowing feature. It has the
capability to blow sawdust and other debris. It can
be used to blow dust and debris out of garagesoroff
patios and driveways. Follow the steps below to use
the vacuumas a blower.
1. Locate blowing port on the vacuum.
2. Insert one end of the hose into the blowing port.
3. Turn vacuum“ON”.
OPTIONAL ACCESSORIES
WARNING: Since accessories, other than those
offered by DEWALT, have not been tested with this
product, use such accessories with this appliance
could be hazardous.
To reduce the risk of injury, only DEWALT
recommended accessories should be used with
this product.
CLEANING
TROUBLESHOOTING
WARNING :
TO REDUCE THE RISK OF INJURY FROM
MOVING PARTS AND/ORELECTRICAL SHOCK,
TURN POWER SWITCH OFF AND DISCONNECT
GROUNDED PLUG FROM ELECTRICAL OUTLET
BEFORE PERFORMING TROUBLESHOOTING
CHECKS.
customer service.
To keep the wet/dry vacuum looking its best, clean
the outside with a cloth dampened with warm water
and mild soap.
To clean thetank:
1. Dump out debris.
2. Wash tankthoroughly with warmwater and mild
soap.
3. Wipe out with dry cloth.
WARNING:To avoid injuryto bystanders, keep
them clear of blowing debris.
WARNING: If the supply cord is damaged, itmust
be replaced by the manufacturer, its service agent or
PROBLEMSOLUTION
Motor does not run
Check power cord, plugs and outlet.
Ensurethe on/off switch is in the
ON position ( I )
nozzle, extension wands, hose
Replace the disposable dust bag.
Empty dust tank, refer to
TO EMPTY
THE TANK under OPERATING
INSTRUCTIONS.
Check for proper installation of
Suction capacity
decreases
Vacuum stops
running
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Emptythedust tank, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position ( I ) to
test.
replace if necessary.
are secure.
Check for proper installation of the
Dust comesout
while vacuuming

10
WARRANTY
COMPLETE WARRANTY STATEMENT – DEWALT WET & DRY VACUUM CLEANER
As soon as you have purchased the DEWALT Wet & Dry Vacuum Cleaner, we recommend that you check to make
sure it is intact and that you read the operating instructions carefully before using it. The purchase receipt for this
DEWALT Wet and Dry Vacuum Cleaner is to be retained and must be presented if making a claim under the terms
of the Mayo Hardware PTY LTD (Mayo Hardware) warranty. Bank account statements are not acceptable for proof
of purchase.
Mayo Hardware is an authorised DEWALT Importer and Distributor of DEWALT Wet and Dry Vacuum Cleaner Models,
not including DEWALT Dust Extraction Models, in Australia and New Zealand. These DEWALT Wet and Dry Vacuum
Cleaner Models are imported under license from Alton Industries Ltd Group (Alton) for DEWALT Industrial Tool
Company by Mayo Hardware. All warranties relating to DEWALT Wet and Dry Vacuum Cleaner Models only, are
covered in Australia and New Zealand by Mayo Hardware. DEWALT and the DEWALT Logo are trademarks of the
DEWALT Industrial Tool Co., or an affiliate thereof and are used under license by Alton.
The Warranty periods;
The actual DEWALT Wet and Dry Vacuum Cleaner motor and motor housing are covered by a 3 year
service warranty with exclusions noted below.
The actual DEWALT Wet and Dry Vacuum Cleaner poly tub only is covered by a 10 year service warranty
with exclusions noted below.
General warranty details for all warranty periods;
This is a repair only warranty; after contacting our customer service centre you will need to take your
DEWALT Wet and Dry Vacuum Cleaner to the authorised service agent.
If in the event of Mayo Hardware choosing to replace the appliance, the warranty will not be extended
beyond the original purchase contract warranty period.
The warranty will under no circumstances extend to reimbursement or payment of damages, whether
direct, indirect or consequential.
The warranty is void if there is evidence the DEWALT Wet and Dry Vacuum Cleaner has been modied
or tampered with in any way or used with unauthorised accessories.
Mayo Hardware declines any responsibility or liability whatsoever arising from misuse or abuse,
negligent handling of the DEWALT Wet and Dry Vacuum Cleaners or if the DEWALT Wet and Dry
Vacuum Cleaner has not been assembled correctly or failure to comply with the relevant safety,
operating, setting and maintenance instructions (see further details in this manual).
The warranty does not cover any fuel costs or personal transport costs associated with returning
your DEWALT Wet and Dry Vacuum Cleaner for either assessment, repair, service, replacement
or credit.
Any item sent freight forward/collect for repair will be refused.
Warranty repairs are free of charge, provided the appliance is delivered to an authorised Mayo
Hardware service agent. The DEWALT Wet and Dry Vacuum Cleaner will need to be returned,
adequately protected in a box. Mayo Hardware will not be responsible for any in-transit loss or
damage. Assistance under the warranty will only be made available if the request is made to our
customer service team on the contact numbers listed below and proof of purchase is provided.
Where a DEWALT Wet and Dry Vacuum Cleaner is returned on pre-paid freight for assessment or
service it will be reviewed accordingly. If a warranty fault is found, the freight cost will be credited to
the owner. If no fault is found, the DEWALT Wet and Dry Vacuum Cleaner will be returned, and any
costs associated with the service will be charged to the owner.
If the DEWALT Wet and Dry Vacuum Cleaner includes various accessories or components, only the
defective DEWALT Wet and Dry Vacuum Cleaner accessory or component will be replaced or
repaired.
Mayo Hardware reserves the right to replace defective parts of the DEWALT Wet and Dry Vacuum
Cleaner with parts and components of similar quality, grade, and composition where an identical
part or component is not available.
DEWALT Wet and Dry Vacuum Cleaners presented for repair may be replaced by refurbished
DEWALT Wet and Dry Vacuum Cleaners of the same type rather than being repaired. Refurbished
parts may be used to repair the DEWALT Wet and Dry Vacuum Cleaners.

The 3 year warranty is a service warranty and specically excludes or does not warrant the following:
The 10 Year limited warranty ONLY applies to DEWALT Wet and Dry Vacuum Cleaners with DEWALT
Orange/Yellow poly tubs. The 10 year limited warranty specically excludes or does not warrant the following:
• Damage or deterioration due to transport.
• Any corrosion or rusting.
• Damage caused by incorrect set up and start up.
• DEWALT Wet & Dry Vacuum Cleaners with serial number defacement, modication or removal.
• DEWALT Wet & Dry Vacuum Cleaners which have been serviced by other than an authorised Mayo
Hardware service agent.
• DEWALT Wet & Dry Vacuum Cleaners with no original purchase receipt.
• DEWALT Wet & Dry Vacuum Cleaners which have been on sold, not original purchaser.
• Damage caused by vacuuming hot ash or hot debris.
• Blockages / damage caused by a build-up of concrete dust, timber debris or other debris due to not
cleaning regularly.
• Damage caused by the incorrect tting of accessories.
• Damage caused by accident, misuse, neglect, abuse or shipping/freight accident. For the purposes of the
3 year warranty, misuse, neglect and abuse are dened as using the DEWALT Wet and Dry Vacuum Cleaner
in a manner not specied by the instruction manual.
• Failure or damage caused by use, misuse or abuse of non-approved accessories or attachments, including
but not limited to, non-genuine accessories & attachments. For the purposes of the 3 year warranty,
non-approved accessories, attachments, are dened as those not specied by the instruction manual.
• DEWALT Wet & Dry Vacuum Cleaners where a modication to the original DEWALT Wet & Dry Vacuum
Cleaner has occurred, or where the DEWALT Wet & Dry Vacuum Cleaner casing has been opened, or where
actual or attempted repair work on the DEWALT Wet & Dry Vacuum Cleaner has been carried by anyone
other than an authorised Mayo Hardware service agent.
• Damage due to non-servicing of DEWALT Wet & Dry Vacuum Cleaners as is required by this manual.
• Damage caused by overloading, overworking or excessive use of the DEWALT Wet & Dry Vacuum Cleaner.
For the purposes of this warranty, excessive use is deemed to have occurred when a DEWALT Wet and Dry
Vacuum Cleaner is assessed by Mayo Hardware as displaying wear & tear that is considered abnormal for a
DEWALT Wet and Dry Vacuum Cleaner of its age, when used in a regular manner, serviced and maintained
as per the requirements of the manual and in the normal use of the DEWALT Wet and Dry Vacuum Cleaner
for which it was designed for are not covered under warranty.
• DEWALT Wet & Dry Vacuum Cleaners purchased outside of, or parallel imported into, Australia or
New Zealand.
• DEWALT Wet & Dry Vacuum Cleaners purchased from an unauthorised DEWALT reseller, including
on-line trading companies or individuals (e.g. Trading Post, Amazon, eBay etc) that are not authorised
DEWALT resellers in Australia or New Zealand.
• Damage to attached equipment or third-party accessories.
• Damage caused by attached equipment or third-party accessories.
• A loan DEWALT Wet & Dry Vacuum Cleaner whilst repairs or servicing is carried out is not available.
• Loss of income due to warranty servicing.
• Rebuilt, Reconditioned, Ex-Display, Factory Seconds & Blemished DEWALT Wet & Dry Vacuum Cleaners.
• Servicing or repairs on DEWALT Wet & Dry Vacuum Cleaners.
• DEWALT Service Parts for DEWALT Wet & Dry Vacuum Cleaners.
• DEWALT Accessories included in the carton of your DEWALT Wet & Dry Vacuum Cleaners.
• Damage or deterioration due to transport.
• Replacement poly tubs due to general wear and tear.
• DEWALT Wet & Dry Vacuum Cleaners with serial number defacement, modication or removal.
• DEWALT Wet & Dry Vacuum Cleaners which have been serviced by other than an authorised Mayo
Hardware service agent.
11
WARRANTY

• DEWALT Wet & Dry Vacuum Cleaners with no original purchase receipt.
• DEWALT Wet & Dry Vacuum Cleaners which have been on sold, not original purchaser.
• Damage caused by overloading, overworking or excessive use of the DEWALT Wet & Dry Vacuum Cleaner
poly tub. For the purposes of this warranty, excessive use is deemed to have occurred when a DEWALT
Wet and Dry Vacuum Cleaner poly tub is assessed by Mayo Hardware as displaying wear & tear that is
considered abnormal for a DEWALT Wet and Dry Vacuum Cleaner poly tub of its age, when used in a
regular manner, serviced and maintained as per the requirements of the manual and in the normal use of
the DEWALT Wet and Dry Vacuum Cleaner for which it was designed for are not covered under warranty.
• DEWALT Wet & Dry Vacuum Cleaners with poly tubs purchased outside of, or parallel imported into,
Australia or New Zealand.
• DEWALT Wet & Dry Vacuum Cleaners with poly tubs purchased from an unauthorised DEWALT reseller,
including on-line trading companies or individuals (e.g. Trading Post, Amazon, eBay etc) that are not
authorised DEWALT resellers in Australia or New Zealand.
• Damage caused by attached equipment or third-party accessories.
• A loan DEWALT Wet & Dry Vacuum Cleaner whilst repairs or servicing is carried out is not available.
• Loss of income due to warranty servicing.
• Rebuilt, Reconditioned, Ex-Display, Factory Seconds & Blemished DEWALT Wet & Dry Vacuum Cleaners
with poly tubs.
• Servicing or repairs on DEWALT Wet & Dry Vacuum Cleaners, other than the actual poly tub which is not
excluded with any of the other clauses.
• The 10 Year Limited Warranty period applies for 10 years from the date of purchase from an authorised
DEWALT retailer. The 10 Year Limited Warranty covers the costs of labour and materials only where they
are used to repair a manufacturing or material defect in the DEWALT Wet and Dry Vacuum Cleaner DEWALT
Orange/Yellow poly tubs.
• The 10 Year Limited Warranty period will not be extended, if for some reason the DEWALT Wet and Dry
Vacuum Cleaner with DEWALT Orange/Yellow poly tubs is replaced during or after the original 10 Year
Limited Warranty period.
• All accessories or components (including those sold with the DEWALT Wet and Dry Vacuum Cleaner) and
all mechanical and electrical parts of the DEWALT Wet & Dry Vacuum Cleaner other than the DEWALT
Orange/Yellow poly tub.
12
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure. The benets of this warranty are in addition to any rights and remedies imposed by
Australian State and Federal legislation that cannot be excluded.
In New Zealand, this Mayo Hardware warranty is in addition to the conditions and guarantees which are mandatory as
implied by the New Zealand Consumer Guarantee Act 1993.
For service, spare parts or DEWALT Wet and Dry Vacuum Cleaner information please contact customer service:
Australia: 1300 360 211
New Zealand: 09 415 6240
Mayo Hardware PTY LTD
Australia: 1300 360 211
New Zealand: 09 415 6240
[email protected]
CONTACT DETAILS

Do not return to place of purchase.
Mayo Hardware PTY LTD
CUSTOMER SERVICE
Australia: 1300 360 211
New Zealand: 09 415 6240
Operating times: Monday – Friday
8.00am - 5.00 pm Australian Eastern Standard Time (AEST)
and are used under license.
for
Due to continual product development, the product
you purchase may differ slightly from the one shown here.
Copyright © 2022 DEWALT.
DEWALT® and the DEWALT Logo are trademarks of
the DEWALT Industrial Tool Co., or an affiliate thereof
DEWALT power tools & accessories.