DH Lifelabs AQUASOLVO AAE-30 06 Series User manual

www.DHLifelabs.com
AQUASOLVOTM
ECO AIR STERILIZER
QUICK START GUIDE
AAE-30XX06
Powered by nature.
Delivered by science.
Filter, Sterilize
AquaSolvo HOCl technology
TM
*XX is color code, please refer to more information in page 2
MADE IN CHINA
EPA Est.
No. 99117-CHN-1
FDA
Registered
No. 3013851416

Product Overview
The AquaSolvo Eco Air Sterilizer has a two stage cleaning system to disinfect
the air. A fan draws air in through the pre-lter at the bottom of the Sterilizer.
Inside, the air passes through the CEF and exits through the top cover.
Stage 1: Pre-lter.The pre-lter captures large airborne particles.
Stage 2: Cold evaporation lter (CEF). CEF absorbs the HOCl water generated
in the water tank. The HOCl water evaporates as air passes through the CEF.
This disperses the HOCl molecules throughout the airspace in the room
allowing it to destroy a variety of bacteria and viruses.
1
1
2
2
3
3
4
4
5
5
6
6
7
Water Tank
Cold Evaporation Filter (CEF)
Cold Evaporation Filter Lid (CEF Lid)
Top Cover
Salt Bottle with Scoop
Power Cord
Pre-lter
1 2
7
Product Specications
Model Number AAE-30XX06 (XX is the product color code)
Color code: WN is whtie & navy blue, WB is white & brown
The cover's image is model: AAE-30WN06 and is only for display.
Power Consumption 21 Watts
Input Voltage 120 VAC 60Hz
Fan Speed 3 levels (Sleep/ 2/ 3)
Noise (dB(A)) Max. 52
Water Tank Capacity 1800ml/60.87oz.
HOCl Recipe 2 scoops non-iodized salt: 1800ml/60.87oz. tap water
Material & Finish ABS, Glossy White & Silver belt
Recommended Room Size 320 square feet
Reminder - Filter Replacement Reminder: Cold evaporation lter
- Salt Level Reminder
- Water Level Reminder
Dimensions H11.8”xDia8.7”(H300x Dia222mm)
Net Weight (without water) 5.29 lbs (2.4 kg)

3 4
Control Panel
ON/OFF
HOCI disinfection works when it is on
Fan Speed
(Sleep/2/3) Three levels of fan speed
Sterilize
The light remains on when the machine is on and
ash when electrolysis is working to process HOCl.
CEF Replacement Indicator
Will remind you to change the CEF
Control Panel
Smart AquaSolvo Creates A Perfect
Experience Every Time!
Salt Level Indicator
High Salt Alert: Flashing+sound alarm+ashing blue light in the
water tank
Water Level Indicator
Low Water Alert: Light on+sound alarm+ashing blue light in the
water tank
Operation Action:
1. Power off the device
2. Fill with tap water to Max line
Operation Action:
1. Power off the device
2. Add 2 scoops of non-iodized salt+Fill with tap water to Max line
Operation Action:
1. Power off the device
2. Empty the water tank
3. Wash the CEF
4. Add 2 scoops of non-iodized salt+Fill with tap water to Max line
Salt Level Indicator
Low Salt Alert: Light on+sound alarm+bule light on in the water
tank

5 6
Maintenance Reminder
Flashing water level indicater + ashing salt level indicator +
sound alarm + ashing blue light in the water tank
Operation Action:
1. Power off the device
2. Empty the water tank
3. Wash the CEF
4. Add 2 scoops of non-iodized salt
5. Fill with tap water to MAX Line
7 Days Maintenance Reminder
It will remind you to maintain the device after 7 days of use
Control Panel Operation
How to work as a Sterilizer
Make sure the CEF is securely in place and the
CEF lid is turned so that the AquaSolvo logo is
aligned with the control panel.
Close the top cover Pour 1800ml/60.87oz. fresh
tap water into the water tank.
Make sure all the salt is
washed off the CEF lid
Press ON/OFF button to
start working
Using the scoop supplied with the
Sterilizer, place 2 scoops of non-iodized
salt on top of the CEF lid as shown.
12
3 4 5
*The machine will provide a 14-hour continuous
operation when the water reaches the Max line based on
the working humidity at 50% and level 3 fan speed.

7 8
Maintenance
Only use genuine D&HLifelabs CleVaFilter&AquaSoFilter with your
AquaSolvo Eco Air Sterilizer. Use of any other lters may compromise
the proper operation of your lter and potentially void your warranty.
Pre-Filter: Part Number AS06FT-1
Clean every month, or more frequently depending on your usage
Cold evaporation lter (CEF): Part Number AS06FT-2
Replace every 6 months
To purchase replacement lters, please visit: www.DHLifelabs.com
Cleaning
• We recommend that you clean the machine at least weekly. Clean the
water tank with fresh tap water to get rid of odors. Use a clean dry
cloth to wipe the external surfaces of the machine.
• It is highly recommended to soak the cold evaporation lter (CEF) in
cool clean tap water for 1 hour each month to minimize odors.
• If the water stays in the tank for 7 days, pour out the residual water in
the tank and prepare a fresh salt water mixture to continue operation.
• Remove and clean the pre-lter every month. Use cool clean tap water
and a dry cloth to clean the pre-lter.
• Do not use wax, furniture polish, or any chemical solution to clean the
sterilizer.