Diagnostic Associates DA-ST512 User manual

DA-ST512
(Transport Mode Toggle Application)
User’s Manual
V2.8 17-01-19

2
Transport Mode Toggle Application
This application displays the current vehicle mode (normal or transport) then gives the operator
the ability to change the vehicle mode if required by selecting it from a menu.
Transport Mode Toggle Process
Once the application is selected it will first read the current vehicle mode and display either
“Normal mode” or “Transport mode” at the top of the screen.
Below this a menu is also displayed giving the possible vehicle modes that can be selected as
described below -
Normal mode - Will put the vehicle into the normal (customer) mode.
Transport mode - Puts the vehicle into restricted transport mode (speed limited etc.).
RETURN - Exits the application and doesn’t change the current vehicle mode.
Selecting one of the first two options will start the procedure to put the vehicle into the required
mode, as described in the “General Procedure” section below.
IMPORTANT - For Jaguar XJ MY13 vehicles, it is recommended that the trunk be opened before
attempting to put the vehicle into transport mode as the trunk will not open if there is no transit
relay fitted.
General Procedure
Please ensure the vehicle is in a safe working mode prior to exercising the following
procedure.
• The engine is required to be running. If it is not currently running on then you will be asked
to start it and to press “OK‟ when this has been done.
• After recognising that the engine is running, the process starts to run and the message
“Please wait‟ is displayed on the screen.
• Once the application has successfully completed “PROCEDURE COMPLETE“ will be
displayed. Pressing the OK button will return to the main application menu.
Note: If the process fails for whatever reason, a failure message will be displayed. At this
time the process should be repeated ensuring that all conditions for the process have been
met.
• To abort the procedure press the X button on the keypad at any time.

3
Transport Mode Toggle Model Year Updates
The software associated with the Transport Mode Toggle application is updated periodically to
increase it’s coverage for new JLR vehicles and model year updates. You can check for these up-
dates by connecting your device to a PC via the supplied USB cable, and launching the DA App
Hub. This tool will connect to the Diagnostic Associates file server and check to see if a newer
version of the Transport Mode Toggle application is available to download.
Transport Mode Toggle Supported JLR Vehicles
The following JLR vehicles and associated model years are supported by the Transport Mode
Toggle application at the time this user manual was produced. To obtain an up-to-date version
of this table you should visit the Diagnostic Associates website.
Supported JLR Vehicles
Transport Mode Toggle
Vehicle / Model Year MY10 MY11 MY12 MY13 MY14 MY15 MY16 MY17 MY18-
MY19
Defender - - Yes* Yes* Yes* Yes* Yes* - -
Discovery/LR3/LR4 Yes Yes Yes Yes Yes Yes Yes Yes Yes
Range Rover Velar - - - - - - - Yes Yes
Range Rover Sport Yes Yes Yes Yes Yes Yes Yes Yes Yes
Range Rover Yes Yes Yes Yes Yes Yes Yes Yes Yes
Freelander/LR2 Yes Yes Yes Yes Yes Yes - - -
Evoque - - Yes Yes Yes Yes Yes Yes Yes
Discovery Sport - - - - - Yes Yes Yes Yes
XJ - New Yes Yes Yes Yes Yes Yes Yes Yes Yes
XJ - Old - - - - - - - - -
XK - New Yes Yes Yes Yes Yes Yes - - -
XK - Old - - - - - - - - -
XF Yes Yes Yes Yes Yes Yes Yes Yes Yes
XE - - - - - - Yes Yes Yes
E-Pace - - - - - - - Yes Yes
F-Pace - - - - - - Yes Yes Yes
I-Pace - - - - - - - - Yes**
F-Type - - - - Yes Yes Yes Yes Yes
S-Type - - - - - - - - -
X-Type - - - - - - - - -
(Yes) - Covered for MY : (Yes**) - Electric I-Pace transport mode only, no speed limiter
(Yes*) - Defender will remove speed-limiter only, it will not set speed-limiter : (-) - N/A