Autel MaxiBAS BT609 User manual

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
QUICKSTART GUIDE
MaxiBAS BT609
Please be advised this tool ships with minimal, non-vehicle specic software.
To download software to use on the vehicles you service, the tool must be registered rst.
Please follow the following steps:
1. Register Tool
1.1 Registration Via Tool
1.2 Registration Via a Windows-based PC
2. Download Software
3. Pair BAS Tester Box to Tablet
3.1 Pair Tablet with BAS Tester Box Via Bluetooth
3.2 Check for BAS Firmware
4. Pair VCI to Tablet
4.1 Pair Tablet with VCI Via Bluetooth
4.2 Check for VCI Firmware
5. Print via Windows PC to Wi-Fi Printer
Contents
1
4
6
2
4
7
3
5
7
8
9

QUICKSTART GUIDE
1. REGISTER TOOL
MaxiBAS BT609
- To register your tool, you must connect your tool to Wi-Fi rst.
• Power on the BT609. Tap on the lower right corner of the
screen
• Swipe the
Wi-Fi toggle to turn on Wi-Fi.
• Select your network and enter password to sign in
- The Quick Settings menu will display.
•
Long press the Wi-Fi icon to enter the Wi-Fi setting menu
- The Wi-Fi icon will light when connection is established
- Once the password of the network is saved, the device will be
automatically connected to the network.
1
3
2
4
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
1

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
QUICKSTART GUIDE
1.1 REGISTRATION VIA TABLET
MaxiBAS BT609
• After the device is connected to Wi-Fi, access Update
- A dialog box will display asking you to register your tool
• Tap Register
• Enter your email address, password and tap Acquire verication
code
• Check your email for the verication code, enter the verication
code, and tap Sign up
- A sign-in screen will display
• Create an Autel ID using an accessible email address
- The serial number and password elds will be automatically
completed.
• Tap REGISTER
1
3
2
4
1. REGISTER TOOL
2

• Set preferred language
• Enter your email address as Autel ID
• Click Get Verication Code
• Select Product Registration from the menu list
- Product Registration screen will display.
• Input your tool’s Product Serial Number and Password
• Type Captcha code as shown
• Click Submit to complete tablet registration
• Using a computer, launch an Internet browser and go to http://pro.autel.com
• Click Create Autel ID on the left side of the screen
• If you already have an Autel ID, sign in and skip to Step 6
- An email titled “Verication Code for New User Registration”
will be sent to you.
• Open email and copy the 6-digit verication code
• Return to http://pro.autel.com to continue registration
• Click Create Autel ID at the bottom of the screen
- Registration Complete screen will display.
• Click Sign in Now and log in
• To locate the tool’s serial number and password: from the Main
Menu select the Setting icon and tap About
• Enter verication code and all other required information marked
with a red asterisk
• Enter Captcha code as shown
• Read the Autel Terms of Use and Privacy Policy and select the check box
6
2
4
Captcha code
8Captcha code
5
1
3
7
QUICKSTART GUIDE
1.2 REGISTRATION VIA PC
MaxiBAS BT609
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
1. REGISTER TOOL
3

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
QUICKSTART GUIDE
2. DOWNLOAD SOFTWARE
MaxiBAS BT609
- If updates are available, the number of available updates
will display above the green Update button
• Select the Update button to view a list of available updates.
• Download the software update by selecting the download icon
on the right
• Download the system update by selecting the download icon
on the right
• Download update for each vehicle manufacturer you service
1
3
2
4
4

- Your tool will automatically start scanning for available BAS
tester boxes. Found devices are listed on the right of the screen.
• Press your BAS tester box serial number to pair the tablet with
BAS tester box
• Power on the BAS tester box
• Select VCI Manager from the main screen and tap BAS BT
- The BAS icon at the upper right corner will light green when
connection is estalbished
2
1
3
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
QUICKSTART GUIDE
3. PAIR BAS TESTER BOX TO TABLET
MaxiBAS BT609
3.1 PAIR TABLET WITH BAS TESTER BOX VIA BLUETOOTH
5

Ensure your network is accessible and has a stable connection.
QUICKSTART GUIDE
3. PAIR BAS TESTER BOX TO TABLET
MaxiBAS BT609
• Select VCI Manager from the main screen and tap BAS
Update
- Your device will automatically checks for new BAS rmware
version
- A message dialog box will display when the download nishes
• Tap OK to complete the update
- A button will display when new rmware version is available
• Select Update now to downlad the new BAS rmware
1
3
2
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
3.2 CHECK FOR BAS FIRMWARE
6

4. PAIR VCI TO TABLET
QUICKSTART GUIDE
MaxiBAS BT609
4.1 PAIR TABLET WITH VCI VIA BLUETOOTH
• Connect the VCI to a vehicle or USB power source
• Select VCI Manager from the main screen and tap VCI BT
1
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
- The VCI icon on the upper right corner will light green when
connection is established
- Your tool will automatically start scanning for available VCI
devices. Found devices are listed on the right of the screen.
• Press your VCI device serial number to pair the tablet with VCI.
2
3
7

4. PAIR VCI TO TABLET
QUICKSTART GUIDE
MaxiBAS BT609
4.2 CHECK FOR VCI FIRMWARE
• Connect the VCI to a vehicle and turn ignition on.
• Select VCI Manager from the main screen and tap VCI
Update
- Your device will automatically checks for new VCI rmware
version
- A message dialog box will display when the download nishes
• Tap OK to complete the update
- A button will display when new VCI rmware version is
available
• Select Update now to download the new VCI rmware
1
3
2
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
8

5. PRINT VIA WINDOWS PC TO WI-FI PRINTER
• Locate the MaxiSYS PC Suite software and click on the Download
Here button
• Open the zip le
•
Within the program dialogue box, check Auto Print to automatically use the
default printer
• Select Quick Print to use the default printer or select Print to choose a printer
• Make sure your Window PC and tablet are on the same Wi-Fi network
• On your computer, go to Autel.com, select Support > Downloads > Autel
Update Tools
• Select MaxiSYS Print, then click the setup.exe le to install the program
4
1
3
2
Works with any printer with a Wi-Fi connection. No need for special software or driver on the tablet.
QUICKSTART GUIDE
MaxiBAS BT609
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES TOOL REGISTRATION VIA PC
9