Diaz DF comfort 20 User manual

Diaz DF comfort 20
www.diaz.be 1
V.21.00
Mounting of the pleated blind
Manual
DF comfort 20
Place the side channels so that the distance is the same at the top
and at the bottom. Fix the channels in the window frame.
1
Content
The older window model
GGU with 105° mortise
requires the spacers
supplied to be inserted into
the running rail. Place the
spacers near the screw.
side channel
2 x handles
DIN 7981 Ø3,9
x 16 mm for
wooden and
synthetic
windows
pleated blind

Diaz DF comfort 20
www.diaz.be 2
V.21.00
Straighten the end caps at the top and at the bottom. Loosen the screws and
push the end caps to the edge of the window. Tighten the screws again.
Mount the operation handles. Slide both handles onto the adapter.
Remove rubber band and unwind the cord incl. the tensions cord bracket.
2
3
4
upper tension
cord bracket
cord
rubber band
Push the upper tension cord brackets in the xing plates until they lock.
5

Diaz DF comfort 20
www.diaz.be 3
V.21.00
8Cut off the excess cord ends
Adjustment of the cord
tension must be uniform
and may only be made
by a professional.
Lead the pleated blind behind the channels.
Push the tension cord brackets over the xing plates at the bottom.
Take the lower tension cord brackets out of the rail.
7
6
e
Operation of the pleated blind
The DF comfort 20 is opened and closed by moving the operation handle,
using the control rod if necessary