
1Before you put on the DidySnap, make sure
to adjust the seat width. Click the shoulder
straps into the M-buckle at the bottom.
2Place the waist belt
around your waist. Place
it higher if your baby is
still small.
3Lead the buckle through
the safety elastic, then
fasten it with a click.
4Pull the belt around your
waist to place the buckle
on your back, centering the
panel on your front.
5Tighten the belt for a
snug fit.
6Place your child,
centered, on top of the
waist belt.
7Pull the back panel up
behind your child. Make sure
the straps pass under baby‘s
legs.
8Put on one shoulder
strap ....
9... then the other one.
Always make sure to
securely hold
10 Make sure your child
is seated deep in the
bottom of the panel.
13 ... to tighten them. Then,
one a time, tighten the
straps near your baby ...
14 ... then the long straps
on the back. Pull them down
towards the front (this helps
protect your pelvic floor).
15 Make sure baby is
seated deeply in the pouch
with the knees positioned at
about the height of baby‘s
bellybutton.
16 For more comfort, use
the short straps situated
near baby‘s head to adjust
the straps that pass under
your arms.
Front Carry
from birth
www.didymos.com
Alternative
11 Fasten the buckle on
your back ... 12 ... and pull the straps
...