Digi Digi CM 32 User manual

Quick Start Guide
Digi CM™
Welcome to your Digi product
Get started: This guide helps you with initial product setup. Need more? Find additional
supporting material for this product at www.digi.com/products/consoleservers/digicm. Or
connect to the online documentation by scanning this code:
Digi Technical Support: Digi offers multiple support plans to help you get the most out of your
product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or
visit www.digi.com/support.
Documentation feedback: To provide feedback on this documentation, send your comments
to [e-mail].
1Verify your components
Verify that you have all included equipment. If any item is missing or damaged, contact your supplier.
Note A loose label sticker that includes the unique device password is included in the box. Retain this label sticker with your hardware records.
This default password will be needed if the device is factory reset and you want to access the web UIon the device.
2Connect the hardware
1. Connect the Ethernet cable.
2. Connect the power supply.
3. Switch the power on.
3Initial configuration
1. Run the Device Discovery Utility or DPA utility:
a. Go to www.digi.com/products/consoleservers/digicm.
b. From the Product Support tab, click Utilities.
c. Select your operating system from the drop-down list,
then download and run the Device Discovery Utility for
Windows or the DPA utility for Unix/Linux.
2. Click Configure to set the initial IPaddress, if it hasn't already
been assigned.
3. Click Open Web Interface to configure the device. A login screen
appears.
4. Enter the default user name and password. The default user name
is root. The default password is printed on the device label. If a
password is not on the label, the default password is dbps. If
neither default password works, the password may have been
updated. Check with your system administrator.
To perform initial device configuration, use the discovery tool or use the straight-thru serial cable with the appropriate adapter to the CM
console port, https, or SSHv2.
If you are a power user, you can use the configuration menu:
© 2019 Digi International Inc.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.

1. Establish a serial connection through the console port (9600, 8, N, 1).
2. Login and enter the default user name and password. The default user name is root. The default password is printed on the device label.
If a password is not on the label, the default password is dbps. If neither default password works, the password may have been updated.
Check with your system administrator.
3. Type the command configmenu. Select option 1 - Network Configuration and follow the prompts.
4. Enter the IP address in the URL address bar of your browser and go to Test Configuration.
4Test configuration
1. Insert the RJ-45 diagnostic loop into Port 1.
2. In the log in dialog, enter the default user ID and password. The
default user ID is root. The default password is printed on the
device label. If a password is not on the label, the default password
is dbps. If neither default password works, the password may have
been updated. Check with your system administrator.
3. Log in to port 1. The default user name is root. The default
password is printed on the device label. If a password is not on the
label, the default password is dbps. If neither default password
works, the password may have been updated. Check with your
system administrator.
Verify your connection to the port by typing some text. If the text
appears correctly on the screen, the configuration is correct.
4. Click Close to exit the port.
5. In the left navigation pane, click Serial
Port>Connection>PortTitle#.
You have successfully installed your Digi CM. Configure the device for your application using your browser. To get back to your Digi CM after
your initial configuration, enter the IP address in the URL address bar and log in. Use the navigation bar on the left to alter your configuration.
The following table shows a list of available adapters and part numbers.
Connection Adapters (in quantities of 8) Order # Application
DB-9M Modem adapter 76000702 DCE devices such as modems with DB9 female ports
DB-9F Console adapter 76000671 Bay Accelar, Nortel and other DB-9 DTE
DB-25F Console adapter 76000673 DTE devices with DB-25 male ports
DB-25M Modem adapter 76000670 DCE devices such as modems
DB-25M Console adapter 76000672 Sun SPARC and other DTE devices with DB-25 female ports