Digimerge DPP12D Manual

Printed in KOREA
Instruction Guide
Model : DPP12D
Electronic Day/Night
Professional Camera
Model : DPP12D
Electronic Day/Night Professional Camera
Digimerge Technologies Inc.

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Electronic Day/Night Professional Camera
1

Electronic Day/Night Professional Camera
3
2
Electronic Day/Night Professional Camera
■Contents
Features
Warnings and Precautions
Names and Functions of Parts
Installation
4
5
9
12
■Front 9
■Top 10
■Rear 11
■Key Extra Connector 11
■Lens
ㆍUsing the auto iris
ㆍUsing a C/CS mount lens
■Connecting to a monitor
■Connecting to power
12
15
15
Components 8
Camera Operation 16
■Settings 19
ㆍLENS 20
ㆍEXPOSURE 22
ㆍWHITE BALANCE 25
ㆍ DAY/NIGHT 26
ㆍDNR 28
ㆍSPECIAL 29
ㆍADJUST 33
ㆍRESET 33
ㆍEXIT 33
- CAM TITLE
- D-EFFECT
- MOTION
- PRIVACY
- SYNC
- LANGUAGE
- RETURN
29
30
31
32
32
33
33
Specifications 36
Limited Warranty 37
Troubleshooting 34

Electronic Day/Night Professional Camera
5
4
Electronic Day/Night Professional Camera
■Features
Warning ■
1/3”Super-HAD
™
II CCD
High Resolution : 560 TV Lines
Min. illumination 0.00004Lux (F1.2, 50 IRE, Sens-Up 256x)
OSD menu control
Internal / Linelock (phase control) function
Electronic day / night function, Sens-Up function (256x)
Motion adaptive digital noise reduction (3D-DNR)
Back light compensation (BLC)
Xtended Dynamic Range (XDR)
8-Zone privacy masking function (polygonal mosaic)
32x digital zoom
Remote OSD menu control (requires optional OSD remote)
Horizontal & vertical image mirroring
Auto sensing DC12V / AC24V
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period,
a fire may be caused.
Do not Install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall
and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.

Electronic Day/Night Professional Camera
7
6
Electronic Day/Night Professional Camera
■Precautions
Only use the camera under conditions
where temperatures are between
-10¡C and +50¡C. Be especially
careful to provide ventilation when
operating under high temperatures.
It can cause the image quality to be
poor.
Severe lighting change or flicker can
cause the camera to work improperly.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install the camera in
extreme temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If exposed to radioactivity the CCD
will fail.
It can damage the CCD.
Do not expose the camera to rain
or spill beverage on it.
Do not expose the camera to
radioactivity.
Never keep the camera pointed
directly at strong light.
Do not drop the camera and protect
it to physical shocks.
Note
ㆍIf the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
ㆍPlease check that the power satisfies the normal specification before
connecting the camera.

Electronic Day/Night Professional Camera
9
8
Electronic Day/Night Professional Camera
■Components
Names and Functions of Parts ■
1. COLOR BOX CAMERA
2. AUTO IRIS LENS CONNECTION PLUG
3. L-WRENCH
4. C-MOUNT ADAPTOR
5. INSTRUCTION GUIDE
Front
①Lens protection cap
Cover the lens when not in use.
②CS-Mount lens adaptor
Attach the CS-Mount lens here.
③Back Focus clamp screw
Loosen the clamp screw with a L-wrench before adjusting the Back
Focal length.

Electronic Day/Night Professional Camera
11
10
Electronic Day/Night Professional Camera
■Names and Functions of Parts
Names and Functions of Parts ■
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC 24V IN
DC12V IN
⑪
⑤ ⑥ ⑧⑦
⑨⑩
Rear
⑤ Auto iris lens connector
Connection terminal for an auto iris lens.
⑥ Auto iris lens selection switch
Used to change between DC or Video
depending upon the type of auto liris in use.
⑦ OSD Extra
Connectstotheremotecontroller(option)
when you want to control OSD away
from the camera
⑧ Video output terminal
Sends video signals and connects
to the video input terminal of the monitor.
⑨ Power lamp
Lights up when the correct power is supplied to the camera.
⑩ Setting button
● SET button : Used for the menu display. This button can be used toconfirm
settings after changing the value of the selected function orcurrent conditions.
●UP & DOWN buttons : Used for selecting items by moving thecursor up or
down on the menu screen.
●LEFT & RIGHT buttons: Used when changing item values, bymoving the
cursor to the left or right on the menu screen.
⑪ Power input terminal
Low voltage power connection.
Top
④Mounting Bracket
Use the screw holes provided when fixing the
camera onto a mounting bracket. Use the clamp
screw as shown in the picture.
※ The mounting bracket can be attached to either
the bottom or the top of the camera. Be careful
not to tighten the screws more than 5mm into the
body, otherwise serious damage can occur.
L
Key Extra Connector (Optional -ACCRC01)
Connects to the remote controller(option) when you want to set up OSD remotely.
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC 24V IN
DC 12V IN
OSD EXTRA
Remote Controller
④
※Contact an authorized technician for inspection.

Electronic Day/Night Professional Camera
13
12
Electronic Day/Night Professional Camera
■Installation
Installation ■
The camera is supplied without a lens. Lenses, such as auto iris,
CS-Mount and C-Mount, can be used.
1. Strip back about 8mm of the outer sheath of the auto iris lens cable.
2. Strip off about 2mm of the insulation of wires inside the
lens cable.
■
Lens
Note
ㆍUsing a DC auto iris lens is recommended to achieve the best
possible results from the camera.
ㆍPlease keep the lens clean.
ㆍForeign objects or fingerprints on the lens will result in inferior image
quality, especially in low light level conditions.
Using the auto iris
3. Remove the cover of the auto iris lens connection plug and solder the
wires to the connector pins inside the plug, as shown below.
4. Replace the auto iris lens connection plug cover. Remove the lens
protection cap and then attach the auto iris lens to the camera by
screwing it in clockwise.
5. Insert the connection plug connected to the auto iris lens cable into
the auto lens connector jack, which is located on the rear of the camera.
6. Set the lens selection switch, located on
the rear of the camera, to either DC or VIDEO,
depending on the type of auto iris lens being
used.
Pin No. LENS
DC VIDEO
Pin No.1 Damping Coil- Red (power)
Pin No.2 Damping Coil+ NC
Pin No.3 Drive+ White (video signal)
Pin No.4 Dreve- Black (GND)
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC 24V IN
DC12V IN

■Installation
Electronic Day/Night Professional Camera
15
14
Electronic Day/Night Professional Camera
Remove the lens protection cap and attach
the CS-Mount lens to the camera by screwing it in
clockwise.
Note
ㆍUse the specified lens connection parts as shown in the picture below.
Using of the wrong sized parts may cause damage
to the inside of the camera or result in poor fitting.
ㆍUsing oa lens which is too heavy affects the balance
of the camera and may cause a malfunction. Please
use a lens that weighs less than 450g.
ㆍSelect Av mode, if possible, when adjusting
the automatic light control (ALC) of an auto lens.
Use of PK mode may cause hunting.
When using a CS-Mount lens
1. Remove the lens protection cap and
attach the C-mount adaptor.
2. Attach the C-Mount lens to the
camera by screwing it in clockwise.
When using a C-Mount lens
Connect the video output terminal located on the rear of the camera
to the monitor.
ㆍThe connection method varies depending on the type of monitor and
accessories. Please refer to the monitor user manual.
ㆍTurn off the power when connecting.
■
Connecting to a monitor
Check the standard power requirement before connecting to power.
■
Connecting to power
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC 24V IN
DC12V IN
AC 24V IN
DC12V IN
AC 24V IN
DC12V IN
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC24V IN
DC12V IN
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC24V IN
DC12V IN
POWER
POWER
Dual Power Type
(AC 24V/DC 12V, AC 24V Class2)
DC Power Type (DC 12V, 500mA)

■
Camera Operation
■
Menu (English)
■
Menu (French)
SETUP menu
LENS (selection)
EXPOSURE
WHITE BAL
DAY/ NIGHT
3DNR
SPECIAL
ADJUST
EXIT
ㆍMANUAL ㆍDC/VIDEO
ㆍSHUTTER ㆍBRIGHTNESS ㆍAGC
ㆍSENSE-UP ㆍBLC ㆍD-WDR
ㆍRETURN
ㆍATW ㆍAWB ㆍAWC→SET
ㆍMANUAL ㆍINDOOR ㆍOUTDOOR
ㆍCOLOR ㆍAUTO ㆍEXT ㆍB/W
ㆍON ㆍOFF
ㆍCAMTITLE ㆍD-EFFECT ㆍMOTION
ㆍPRIVACY ㆍLANGUAGE ㆍRETURN
ㆍSYNC
ㆍFACTORY RESET ㆍRETURN
RESET
ㆍSHARPNESS ㆍBLUE ㆍRED
SET UP menu
LENS
EXPOSITION
BAL BLANC
JOUR / NUIT
3DNR
SPECIAL
AJUST.
SORTIE
ㆍMANUEL ㆍDC/VIDEO
ㆍOBTURATEUR ㆍLUMINOSITE ㆍAGC
ㆍDETECTEUR ㆍBLC ㆍD-WDR
ㆍRETOUR
ㆍATW ㆍAWB ㆍAWC→SET
ㆍMANUAL ㆍINTERIEUR ㆍEXTERIEUR
ㆍCOULEUR ㆍAUTO ㆍEXT ㆍN/B
ㆍON ㆍOFF
ㆍTITRE CAM ㆍEFFET-D ㆍMOUVEMENT
ㆍPRIVATIF ㆍLANGAGE ㆍRETOUR
ㆍSYNC
ㆍRESET USINE ㆍRETOUR
RESET
ㆍCONTOUR ㆍBLEU ㆍROUGE
Electronic Day/Night Professional Camera
17
16
Electronic Day/Night Professional Camera