Digimerge DCB13TL User manual

Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.digimerge.com
Copyright ©2010 Digimerge Technology Inc.
www.digimerge.com
Digimerge Technologies Inc.
Copyright © 2010 Digimerge Technologies Inc.
As our products are subject to continuous improvement,
Digimerge reserves the right to modify product design,
specifications and prices, without notice and without
incurring any obligation. E&OE
IT’S ALL ON THE WEB!
Camera SpecificationsCamera Specifications
HIGH RESOLUTION
COLOR IR BULLET CAMERA
Image Sensor 1/4” Echelon Series Sensor
Lens / Lens Mount
Video Format / Pixels
Horizontal Resolution
Minimum Illumination
Termination
IR / Night Vision Range
FOV (diagonal)
S/N Ratio
Sync. & Scan. Systems
Video Output
Power Consumption
NTSC: 656(H) x 492 (V)
480 TVL
0.6 LUX @ F1.2 (IR Off)
0 LUX (IR LEDs ON)
Video: BNC Female
Power: Barrel Female
30 IR LEDs/850nm/75’(23m)
50 Degrees
> 48dB
Internal; 2:1 Interlace
Comp. 1.0 Vpp @ 75ohm
200mA max
Operating Temp.
Dimensions
LxWxH
(with stand & sunshade)
-4°F ~ 122°F
(-20°C ~ 50°C)
3.9” x 2.7” x 3.2”
100mm x 68mm x 80mm
5.08 mm F2.8/ Fixed
Iris & Shutter Speed AES; 1/60 ~ 1/50,000 sec.
Power Requirement 12V DC ±10%
Weight (with stand) 10.4 oz / 294.8 g
English Version 1.0
QUICK START GUIDE
DCB13TL
MODEL:

4. Connect power to the camera:
•DC Power—Power adaptor: Connect the
included 12V DC Power Adaptor to the camera.
Plug the Power Adaptor into an outlet.
•DC Power—Power Pigtail: Connect the included
Power Pigtail to the camera. Connect the
terminating wires of the cable directly to the DC
power source.
•Red wire on Pigtail is positive (+)
•Black wire on Pigtail is negative ( - )
Contents Installing the Camera
1 x Power Pigtail
1 x High Resolution Color Camera
1. Mount the camera stand to the desired mounting
surface using the provided screws.
2. Attach the camera to the supplied stand at either
of the two connection points.
3. Use the BNC connector to connect camera to a
monitor, switch etc.
ATTENTION - This Camera includes a Mechanical Auto IR Cut Filter.
When the camera changes between Day/Night filtering, an audible
clicking noise may be heard coming from the camera. This clicking is
normal, and indicates that the Camera filter is working.
Features
•1/4” Echelon Series Image Sensor provides
a High Resolution image (480 TV Lines)
•Auto Mechanical IR Cut Filter removal
function ensures accurate color reproduction
•Durable Weatherproof Indoor/Outdoor
camera (IP66)*
•Enhanced Night Vision Capability - up to 75
ft / 23m **
•12V DC Operation
* Not intended for submersion in water. Installation in
a sheltered location recommended.
** IR Illumination range of 75 ft. (23m) under ideal
conditions. Objects at or beyond this range may be
partially or completely obscured, depending on the
camera application.
WARNING - A REGULATED UL/CSA APPROVED 12V DC 500mA
power supply is REQUIRED for use with this camera. Use of a non-
regulated, non-conforming power supply can damage this product and
will void the warranty.
Connecting the Camera
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the cameras and cables
to the TV,VCR, DVR or Observation System.
1 x Mounting Bracket / Stand
Setup Diagram:
1x 12V DC Power Adapter
PRECAUTIONS
• Use an appropriate low voltage power cable to prevent fire or
electrical shock.
• Make sure to install the camera in an area that can support the
camera weight.
• There are no user serviceable parts inside the camera. Please
do not disassemble the camera.
• Do not clean the lens cover with an abbrasive cleaning material
Please use a soft cloth to clean the lens cover.