Digisol DG-SC2600 User manual

V1.0
2013-02-12
SKYROS SERIES
1.3 Megapixel IP Surveillance Camera
DG-SC2600 / DG-SC2600W
Setup Guide :
Internet browsing on smartphones
(This Guide applies to all Hardware Versions of DG-BG4011N)
SETUP GUIDE
Access Remote IP Camera using DDNS Account
(This guide applies to DG-SC2600 & DG-SC2600W IP Camera with
No-IP.Com DDNS Account)

SETUP GUIDE
Access Remote IP Camera using DDNS
COPYRIGHT
Copyright 2013 by Smartlink Network Systems Ltd. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of this company This
company makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Any software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not this company, its distributor,
or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or
consequential damages resulting from any defect in the software. Further, this company reserves
the right to revise this publication and to make changes from time to time in the contents thereof
without obligation to notify any person of such revision or changes.
Trademarks
DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property
of the respective manufacturers.

SETUP GUIDE
Access Remote IP Camera using DDNS
DIGISOL IP Camera can be viewed remotely over the internet using a DDNS account. DDNS configuration
is an ideal solution for monitoring your home or office remotely with help of a Domain Name. It is
extremely easy & convenient to configure the network camera in just a few simple steps and access it
remotely using a smartphone, tablet, or computer no matter where you are.
DDNS Service providers supported in this IP Camera:
No-ip.org
Dyndns.org
Note:-
1. You first need to register and create a DDNS Account.
2. Create a HOSTNAME in the DDNS account with which the IP Camera will be viewed remotely.
3. It is assumed that the IP Camera & Internet router is installed and working in the LAN network.
4. It is assumed that the router is configured for Internet and the Internet is working in the LAN.
Network Components:
1. DG-SC2600 or DG-SC2600W IP Camera
2. DG-BG4300N ADSL Router for Internet Connectivity
3. A PC/System to view the IP Camera remotely
Network Setup:
In the below network setup, DG-BG4300N is configured for Internet using MTNL ADSL. The LAN IP of the
router is 192.168.1.1. In the same LAN the IP Camera is connected.

SETUP GUIDE
Access Remote IP Camera using DDNS
Connect the IP Camera in LAN; by default the IP Camera will have an IP address as 192.168.2.3. Login to
the web GUI of the IP camera; the default user name is “admin” and password is “1234”.
If the IP Camera in LAN is not having a static IP address then please assign a static IP address to the IP
camera. Static private IP address is required becaue the ports need to be opened on the router for this
specific IP address.
Login to the IP camera and click on “Network > LAN”. Select the “Network Type” as “Static IP Address”
and enter the IP Address and subnet mask; in this setup the IP assigned is “192.168.1.8” and the subnet
mask is “255.255.255.0”.
Step 1 : Login to the IP Camera
Step 2 : Assign a Static IP address to the IP Camera

SETUP GUIDE
Access Remote IP Camera using DDNS
The Gateway IP should be the LAN IP address of the router i.e. “192.168.1.1”in this example. Enter the
DNS server IP as shared by your ISP else you can enter the Global DNS as 4.2.2.2 and 4.2.2.1.
Click “Apply” to save the settings.
Click on the “Network > Dynamic DNS” tab on top and set the following settings:
Enable DDNS: Enable
Provider: no-ip.com
Host Name: digisolcam.no-ip.org (this is the host name which is configured in the DDNS i.e no-ip.com
Account.)
Step 3 : Configure DDNS Settings on the IP Camera

SETUP GUIDE
Access Remote IP Camera using DDNS
Username: (it is the DDNS account login user name)
Password: (it is the DDNS account login password)
Click “Apply” to save the settings.
Click on “Network > RTSP” on top to open up the Video Streaming settings page. Please note the RTSP
Port “554”. This port along with the http port “80” needs to be opened on router for remote viewing of
ip camera.
Step 4 : Note the Ports which needs to be opened on the Router

SETUP GUIDE
Access Remote IP Camera using DDNS
Login to the GUI of the router using its LAN IP. In this setup the router ip is 192.168.1.1. The defualt user
name and password for DG-BG4300N is “admin”.
Click on “ Advanced > NAT” on top and “Virtual Server” on the left hand side.
Create the following 2 rules as show in the figure below:
Rule1:
1. Select radio button for “User-defined Service Name”
2. Enter the Service Name as “2600W_http”. This is just a name for the rule for identification
purpose.
3. Select Protocol as “tcp”
4. Select the WAN Setting as “Interface”
5. Select the WAN Interface as “pppoe1”. This is the ADSL connection name which is connected to
Internet.
6. Enter the WAN Port as “80”
7. Enter the LAN Open Port as “80”
8. Enter the LAN Ip Address as “192.168.1.8”
Click “Apply Changes” to save the settings.
Step 6 : Opening ports on Router

SETUP GUIDE
Access Remote IP Camera using DDNS
Rule2:
1. Select radio button for “User-defined Service Name”
2. Enter the Service Name as “2600W_rtsp”. This is just a name for the rule for identification
purpose.
3. Select Protocol as “tcp”
4. Select the WAN Setting as “Interface”
5. Select the WAN Interface as “pppoe1”. This is the ADSL connection name which is connected to
Internet.
6. Enter the WAN Port as “554”
7. Enter the LAN Open Port as “554”
8. Enter the LAN Ip Address as “192.168.1.8”
Click “Apply Changes” to save the settings.

SETUP GUIDE
Access Remote IP Camera using DDNS
Verification:
Now from a remote system over Internet, open a web browser and enter the URL as
http://digisolcam.no-ip.org and press enter. The Camera Login page will open up and prompt for
camera username and password. Login to the camera and then veiw the video.
You can also view the camera remotely on Android or Apple IOS supported Phone/Tab using the
“SKYROS iView APP”.
APP Icon

SETUP GUIDE
Access Remote IP Camera using DDNS