Digital Watchdog DWC-V4CMW User manual

Ceiling mount bracket for Snapit™ vandal dome cameras
Quick Start Guide
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws 4Quick Setup Guide 1
Screws and Plastic Anchors 4Mounting Template 1
DWC-V4CMW
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
Screw &
Plasc Anchor-4pcsManual
95.4
101.7
64.1 41.5
242.1
146.1
82
Ø4.5
78
2
5
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
Please check if all the camera and accessories are included in the package.
Mount Template
Mount
Screw 4ea
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
Screw &
Plasc Anchor-4pcsManual
95.4
101.7
64.1 41.5
242.1
146.1
82
Ø4.5
78
2
5
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
Please check if all the camera and accessories are included in the package.
Mount Template
Mount
Screw 4ea
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
Screw &
Plasc Anchor-4pcsManual
95.4
101.7
64.1 41.5
242.1
146.1
82
Ø4.5
78
2
5
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
Please check if all the camera and accessories are included in the package.
Mount Template
Mount
Screw 4ea
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
Screw &
Plasc Anchor-4pcsManual
95.4
101.7
64.1 41.5
242.1
146.1
82
Ø4.5
78
2
5
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
Please check if all the camera and accessories are included in the package.
Mount Template
Mount
Screw 4ea

Quick Start Guide
Rev Date: 08/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
2Secure the mounting bracket to the mounting surface using the screws and anchors included.
3To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
with the camera. Remove the camera base from the junction box by loosening the screws at the base of the camera.
NOTE: Do not touch the lens when handling the camera.
4Secure the camera’s junction box to the mounting bracket using the included camera mounting screws.
5Pass wires through the mounting bracket and make all necessary connections with the camera. Use the cable holder, at
the base of the junction box, to manage the camera’s cables as needed.
6Connect the camera to the junction box, adjust the camera’s position and angle and complete the installation by placing
the dome cover on the camera. Secure the dome cover to the camera’s junction box using the screws included with the
camera. See the camera’s QSG for more information.
Ceiling mount
Camera junction box
Camera module
Camera dome cover