Digital Watchdog DWC-MV9JUNC User manual

DWC-MV9JUNC
Junction box for fixed lens vandal dome cameras
Quick Start Guide
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Mounting Screws and Anchors (PA4x25mm, head diameter 8mm) x4
Waterproof Rings for Mounting Screws x4
Mounting Template x1
Camera Mounting screws (PM4x16, head diameter 8mm) x4
Cable Gland Connector x1

1Using the mounting template or the junction box itself, mark and drill the necessary holes on the
mounting surface.
2Secure the junction box to the mounting surface using the screws and anchors included.
3To mount the camera to the mounting accessory, remove the dome from the camera base using the
wrench included with the camera.
NOTE: Do not touch the lens when handling the camera.
4
Pass wires through and make all necessary connections.
5
Secure the camera to the mounting bracket using the included screws.
6
Adjust the camera lens position and angle and complete the installation by placing the dome cover on the camera. Secure the
dome cover to the camera base using the screws included with the camera. See the camera’s QSG for more information.
Quick Start Guide
Rev Date: 12/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION