Digitus POWER ROCKET 2200 User manual

PORTABLE BATTERY
POWER ROCKET 2200
User Manual
DA-11100

PRODUCT SPECIFICATION
Suitable for Mobile phones and digital
products
Input voltage DC5V
Input current 800 mA (MAX)
Output voltage DC 5V - 5.5V
Output current 1000 mA (MAX)
Capacity 2200 mAh
Product weight 68g
Product dimension 102mm (L) x 23.5mm (W) x
23.5mm (H)
Operating temperature -10°C - 60°C
Storage temperature -10°C - 45°C
MAINTENANCE
Keep your power bank operating to its full potential,
by following these three steps:
1. Recharge your power bank once every three months
when it is not in use
2. Keep the power bank away from any moist environment
and corrosive material
3. Never wash the power bank with any chemicals,
soaps or detergents

HOW TO USE
1. Simply use the attached USB cable to charge the digital
product. Connect one end of the USB cable with the output
port of the power bank; connect the other end with the digital
product with the converted tip. Press the “On” button once to
turn it on. It will start to charge and the green LED will
indicate the charging process.
2. If the charging process is finished, or a failure occurs by
connecting the digital product, the green LED will stop
flashing and the power bank will turn off automatically after
30 seconds.
3. 30%, 70%, 100% are the three capacity indicators. When the
30% indicator light is on, it means low power. Please charge
the power bank in time.
Note: If the instantaneous current is oversize while charging
the digital product, the power bank will turn to the

protected mode automatically. To relieve the protected
mode just charge the power bank .
HOW TO CHARGE THE POWER BANK
The "IN" port is the charging port of the power bank. The
capacity indicator will flash, when charging the power bank and
the 100% indicator will turn on after full charging.
UNIT VIEW DESCRIPTION
1. Capacity indicator
2. ON button
3. USB output port
4. Input port