Digitus Wireless Charging Pad Duo User manual

Wireless Charging Pad Duo
Quick Installation Guide
DA-10082

2
Note: For best perform and safety, please read this manual carefully before
using the product.
1. Introduction
The Duo-Power Wireless Charger 15W from DIGITUS® enables simultaneous
wireless charging of 2 devices. The charging pad offers a fast, wireless 2 in 1
charging solution with up to 15W and a slip-proof base to make sure devices
stay one place.
2. Features
1. Intelligent distribution of charging power depending on the dev ice
placed on top (15W+0W, 10W+5W, 7.5W+7.5W or 5W+5W (Max 20W))
2. Compatible with all Qi-capable smartphones as well as Qi-capable
Air Pod®/ Air Pod Pro®
3. Inductive charging technology for wireless charging of compatible
smartphones
4. Overvoltage protection, under voltage protection,
Overcurrent protection and Over-temperature protection
5. Connection cable with USB-C plug
6. Compact and robust housing with elegant look
7. Power adapter is not included in the scope of delivery

3
8. The pad can charge without a problem through protective covers up to
5mm thick. Metal accessories and credit cards can restrict the charging
process.
9. If the phone cover is more than 6mm thick, it must be removed,
otherwise the phone cannot be charged.
3. Package content
1x Wireless Charging Pad Duo

1x QIG (Quick Installation Guide)

1x Connection cable USB-A to USB-C
4. Specifications
1. Charging pad with 1.0m charging cable and USB-C connection
2. Compatible with smartphones that support inductive charging
3. Input voltage: 5V/2A, 9V/3A
4. Output 1: 5W / 7.5W / 10W / 15W
Output 2: 5W / 7.5W / 10W / 15W
Total Max: 20W
5. Overvoltage protection, under voltage protection,
Overcurrent protection and Over-temperature protection
6. Housing: Fire-resistant material

4
7. Dimensions: L 198 x W 89 x H 9.8 mm
8. Color: black
9. Weight: 115.8g
10.Frequency Band: 110~205KHz
11.Maximum Radio-Frequency: 31.2dBuA/m at 3m Distance
5. Product Diagram
1) Transmitter
2) Indicator Light
3) USB-C port

5

6
6. User Instruction
6.1 Connect with wa ll charger
Please insert the USB-A connector of this product into the charger so as to
ensure it in standby mode.
Note: In order to get the best charging effect, please use the adapter that
meets the QC 2.0/3.0/4.0 standard. In order to save energy and extend the
product life, please cut off the power when your phone fully charged to
avoid wasting energy.
Attention: For safety reasons, please do not use any adaptor which is under
5V/1A.

7
6.2 Charging your Smartphone
After connected with an adapter, Please align the wireless charging area of
the product with the wireless charging receiving area of your phone and
start charging, Max to be 15W.
Tips: Please align the wireless charging area of the product with the wireless
charging receiving area of the device perfectly to reach higher charging
efficiency.
Note:
Under normal charging conditions, the charger and mobile phone could
be slightly hot; the temperature may rise if the mobile phone is working
while charging (such as playing video).
Please stop charging your phone when the chargers over-heating our
product will automatically stop charging when over-heating. Please try it
again when it’s cooled down.

8
6.3 Remark
When the surface gets dirty, please wipe it with a damp cloth and dry it
before using.
Please remove foreign objects on the surface before using, such as coins,
pins, keys and other metal objects.
No washing
No metal objects on
the surface
No knocking

9
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of Conformity is
missing, you can request it by post under the below mentioned
manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid,
Germany