Digitus DA-71546 User manual

M.2 NVMe + M.2 SATA SSD Docking
Station with SD Express Card
Reader, USB-C™
Quick Installation Guide
DA-71546

2
Package content:
•1 x M.2 NVMe + M.2 SATA SSD Docking Station with SD Express Card
Reader, USB-C™
•1 x USB-A power adapter
•1 x USB-C™ connecting cable, 80 cm
•1 x USB-C™ to USB A connecting cable, 80 cm
•1 x Quick start guide
Description
The 3-in-1 Docking Station from DIGITUS® can accommodate M.2 SSDs in
NVMe o r S ATA technology; an SD Express 7.1 card reader with the highest
data transfer rates is also integrated. Manage M.2 data carriers with up to
4 TB per slot and additionally SD.
Feature Benefits
•1 x M.2 Box for NVMe SSDs (B+M-Key / M-Key)
•Plug and Play, no driver installation required
•1 x M.2 Box for SATA SSDs (B+M-Key)
•1 x SD Express 7.1 memory card reader / 1000 MB/s max.
•High data transfer rate of up to 10 Gbps (U.A.S.P + T.R.I.M support)
•Supports cards NVMe & SATA SSDs up to 4 TB capacity
•Supported formats: 2242, 2260, 2280 & 22110
•Can be used as a storage medium for up to 10 TB in total
•USB-C™ connection: USB 3.2 Gen2
•Ideal storage extension for notebooks, PCs, gaming consoles, TVs, NAS
or routers (USB-C™)

3
Product Details
Technical Specification
Interface:
Type-C to M.2
Support SSD:
B+M Key(SATA)；M-key/B+M key(NVMe)
Support SD:
SD Express and down compatibility
USB peed:
10 Gbps
Rating:
5V, 3A
Feature:
External storage and SD card reader
Compatible:
Windows XP/7/8/8.1/10, MAC OS
Unit size:
79(L)X76(W)X18(H)MM
LED:
Power(green),disks(white),SD(white)
PC Type-C
Power Type-C
Power switch
B+M Key SATA M2
M-key NVMe M2
Disk LED
SD memory LED
SD express slot
Power LED

4
Attention
Check the connector icon and SSD label match before
assembling SSD, cannot work if assemble wrong SSD
1. SATA connector workable to B+M key SATA SSD only
2. NVMe connector workable to M-key NVMe and B+M key NVMe

5
PC mode (Read and Write)
1. External storage
•Insert M.2 SSD to correct SSD slot
•Connect USB cable with docking and PC/NB
•Connect power type C with docking and AC adapter
•Press power switch one time, power and disks LED will
illuminate following
2. SD card reader
•Insert SD memory card to slot
•Connect USB cable with docking and PC/NB
•Connect power type C with docking and AC adapter
•Press the power switch one time, then SD LED will
illuminate following

6
New hard drive format
1. View “computer-Manage-Disk Management” to find the new disk.

7
2. Right click the “Disk 1” then click “New Simple Volume”.
3. According to the instruction, choose the size of partition
then click “Next” to finish.

8
4. Then you can find the new hard disk in the “computer”,
it’s ready to be use.

9
Disclaimer:
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures on the user
manual are just for reference, and there may be some slight difference with the real
products.
We reserve the rights to make changes without further notice to a product or system
described herein to improve reliability, function or design.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post under
the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513
Lüdenscheid
Germany