Digitus DA-70881 User manual

USB-C™ 11-in-1
Docking Station with Aluminum
Monitor Stand
Manual
DA-70881 Rev.1

1
1. INTRODUCTION
This is a multi-functional USB-C™docking station with monitor riser
stand design. It mainly extends the USB-C™interface of the source
device to 1x HDMI, 1x VGA, 1x RJ45, 3x USB 3.0 (A),
1x SD, 1x MicroSD card reader, 1x 3.5mm Audio, 1x USB-C™ (PD) for
charging, 1x USB-C™data port (connection to host)
Note:
The USB-C™source devices (notebook / tablet / smartphone) must
support video output according to DisplayPort Alternate Mode. Also,
it must support USB Power delivery (PD) specification.
Please connect USB-C™ charging adapter while operation to secure
full functionality.

2
Example for application:
1
Headphones
6
Keyboard
2
Power Adapter
7
USB Drive
3
Network
8
Smartphone
4
VGA Display
9
Memory Card
5
HDMI Display
10
Notebook

3
2. FEATURES
1xUSB-C™input (connection to host)
1x HDMI port
1x VGA port
1x RJ45 port
1x USB-C™ port for Power Delivery (PD)
3x USB 3.0 (A) port
1x SD card reader
1x MicroSD card reader
1x 3.5 mm audio port
Supports HDMI resolution up to 3840x2160@30Hz
Supports VGA resolution up to 1920x1080P@60Hz
Supports VGA and HDMI simultaneously output
Supports 10 / 100 / 1000 Mbps bandwidth
Stereo port supports both microphone and headphone
Supports plug and play, hot swap
USB 2.0 SD card slots, Support Micro SD / SDHC / SDXC
(up to 2TB)
Supports SST (Single Stream Transmission) mode
Comply with USB-C™interface specification 3.1 (Gen.1)
Supports Plug & Play

4
3. ADDITIONAL INFORMATION:
4. CONNECTION
Operating Temperature
0°C to +45°C
Operating Humidity
10% to 90 % RH (no condensation)
Storage Temperature
-10°C to +70°C
Storage Humidity
10% to 90 % RH (no condensation)
USB-C™PD Charging Port
100W (max.)

5
5. DISPLAY SETTING FOR WINDOWS
Right click desktop > display settings

6
6. GRAPHICS SETTING FOR WINDOWS
1) Clone mode
a. Right click desktop > graphics setting
> display

7
2) Extended Desktop
a. Right click desktop > graphic settings
> display

8
7. RESOLUTION SETTING FOR MAC
Apple logo > System preferences > Displays

9
8. GRAPHICS SETTINGS FOR MAC
1) Mirror display
a. apple logo > system preferences > displays

10
2) Extend display
a. Apple logo > system preferences > displays

11
9. OPERATION
1) Connect the USB-C male port of this product to your device
2) Connect the three USB3.0 ports to three USB devices
3) Connect the HDMI port to HD display with one HDMI Cable
4) Connect the VGA port to HD display with one VGA Cable
5) Connect Gigabit Ethernet port of this product to Ethernet
Router with an Ethernet cable
6) Connect the Stereo port to earphone
7) Insert Micro SD and SD/MMC cards into the card reader ports
8) Connect the USB-C™charging port, it can charge your device
(PD) and supports this adapter to work simultaneously
Note:
1. When connecting the USB-C™plug of the adapter (cable) to
Chromebook, the mouse to be connected to the USB 3.0 port
will not work immediately, it will have seconds’ delay. This
problem also occurs in another similar type-c adapter
(including Apple original 3 in 1 Adapter) when connected to
Chromebook.
2. When connecting this product to Chromebook, the VGA video
signal may not appear on the screen of the VGA monitor under
certain resolutions.
3. When plugging in and out the PD Adapter, the connected USB
devices will get disconnected flashily and then reconnect in a
few seconds, so to prevent possible data loss or corruption,
avoid disconnecting the PD Adapter from AC power while
transferring data.

12
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany