Digitus DN-82211 User manual

10 GIGABIT
MEDIA CONVERTER
User Manual
DN-82211

Overview
10G Base-T to 10G Base-R Media Converter supports
two types media for network connection such as
10GBase-T and 10GBase-FX. The bridge media
converter is designed with a 10Gbase Ethernet PHY
chip that connects two types segments operation
smoothly. This converter can be used as standalone
unit or as slide-in module to the 19”converter rack
Chassis for use at a central wiring closet.
Technical Specifications
Standards
1000Base-T, 2.5GBase-T, 5Gbase-T,
10Gbase-T, 1000Base-X, 2500Base-X,
5GBase-R , 10GBase-R
Media
Supported
1000Base-T: Cat5 UTP/STP. MAX 100m;
2.5GBase-T: Cat5e UTP/STP. MAX 50m;
5GBase-T: Cat5e UTP/STP. MAX 50m;
10G Base-T: Cat6a UTP/STP. MAX 50m;
Port Type
RJ45, SFP Slot
Work Mode
1000Base-T to 1000Base-X
2.5GBase-T to 2500Base-X
5Gbase-T to 5GBase-R
10Gbase-T to 10GBase-R
Power Supply
12V DC
Power
consumption
MAX 5W

Operation
Temperature
0°C to 55°C
Relative
Humidity
5% to 80% (non-condensation)
Installing the Converter
For as a standalone unit:
Verify the DC adapter conforms to your country DC
power requirement and insert the power plug
Connect the media cable for network connection
For as a slide-in unit:
The slide-in Media Converter and Converter Rack
Chassis should supplied only from the same source,
both Media Converter Rack Chassis are built to
match each other at dimension, DC jack, DC
receptacle and power safety.
Turn off the 19” converter rack power
Locate +12V DC power jack on converter back,
carefully slide in and plug to 19” rack +12V DC
power receptacle
Connect the media cable for network connection
Turn on the converter rack power, the Power LED
will light up

Wire connection, Front and Side panel

Check List
Before you start installing the Converter, verify that the
package contains the following:
The TP-Fiber Converter
AC to 12V DC Power Adapter (for external models) or
Power Cord (for internal models)
The User’s Manual
Please notify your local sales distributor immediately if
any of the aforementioned items is missing or damaged
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part
of the shipping content. If the Declaration of Conformity is missing, you can request it
by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany