Digitus DA-70156 User manual

USB TO SERIAL
CONVERTER
User Manual
(DA-70156)
ELECTROSÓN

Windows XP Installation Guide
Step 1: Insert CD Driver of this product to the CD-ROM
Step 2: Connect the device to a spare USB port on your PC, and find new hardware
wizard, please refer to the following chart:
ELECTROSÓN

Step 3: Select “No, not this time“, click “Next” to continue.
Step 4: Select “Install from a list or specific location (Advanced)”, click “Next” to continue.
ELECTROSÓN

Step 5: Select “Search removable media (floppy, CD-ROD…)”, click “Next” to continue.
Step 6: Auto search for the corresponding driver in the CD.
ELECTROSÓN

Step 7: You will find two types of hardware wizard, one is for USB 2.0 TO RS232
Converter, another one is for USB 2.0 TO RS232 cable. Please choose the
corresponding driver according to your product, click “Next” to continue.
Step 8: The wizard has started installation and copy file to your system
ELECTROSÓN

Step 9: Click “Finish” to close the wizard.
Step 10: Find new com port.
ELECTROSÓN

Step 11: Select “No, not this time“, click “Next” to continue.
Step 12: Select “Install from a list or specific location (Advanced), click “Next” to
continue.
ELECTROSÓN

Step 13: Select “Search removable media (floppy,CD-ROM…)”,click “Next” to continue.
Step 14: Auto search for the corresponding driver in the CD.
ELECTROSÓN

Step 15: Choose one type of the driver for your product, click “Next” to continue.
Step 16: The wizard has started installation and copy file to your system .
ELECTROSÓN

Step 17: Installation completed, click “Finish” to close the wizard.
Step 18: Your new hardware is installed and ready to use.
ELECTROSÓN