Digitus DS-30000-1 User manual

SERIAL I/O, 2-PORT
PCI EXPRESS ADD-ON CARD
User Manual
DS-30000-1

Features and Benefits
1. Compliant with PCI Express Base spec 1.1
2. Compliant with PCI Power Management 1.2
3. Supports 2 x UART serial port
4. Built-in 16C950 compatible UART
5. 128-byte deep transmit/receive FIFOs
6. Serial data transfer rate up to 230400bps
PCI-Express x1
2 x DB9 male serial connectors
System Requirements
Windows®2000, XP/2003 32/64 bit, Vista , Win 7, Win 8, Win 8.1
32/64bit and Linux
PCI Express-enabled system with an available PCI Express slot
Package Contents
1 x PCIe Serial Card 2 Ports
1 x Driver CD
1 x User’s Manual

Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with
the selected PCIe slot on the motherboard. Push the board
down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
Different systems please select its corresponding driver files
1. Insert the Driver CD into the CD-ROM drive.
2. At the Found New Hardware Wizard, Select Locate
DS-30000-1\DS-30000-1_CD\Driver
3. Press “Install” button to install the drivers.
4. Click “Exit” button to complete the driver installation.
5. Restart the PC.
6. Once the system gets booted the Windows will automatically
matching the device driver

To Verify Windows®Driver Installation
Click on the Device Manager tab in System Properties, which you
access from the Windows Control Panel. You should see two PCI
Express UART Port … installed under Ports (COM & LPT) item,
and one PCI Express Multiport Serial Adapter installed under
Multi-port serial adapters item.